JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE) ›› 2017, Vol. 47 ›› Issue (3): 143-150.doi: 10.6040/j.issn.1672-3961.0.2017.030

Previous Articles     Next Articles

Preparation and optimization of compound bonded material used in reducing the contact thermal resistance

DONG Zhen1,2, YANG Yonglu2, XIONG Guodong2, LAI Yanhua1, 2*, LYU Mingxin1,2   

  1. 1. Suzhou Institute, Shandong University, Suzhou 215028, Jiangsu, China;
    2. School of Energy and Power Engineering, Shandong University, Jinan 250061, Shandong, China
  • Received:2017-01-16 Online:2017-06-20 Published:2017-01-16

Abstract: To enhance the global thermal conductivity of adsorbed bed, heating resistingand corrosion-resistant composite bonded material with high thermal conductivity was studied. It could be daubed between adsorbed bed and adsorbent for decreasing thermal contact resistance.The article experimental researched the influence of thermal conducting filler, diluent and coupling reagent and other factors on composite bonded materials thermal conductivity at first. And then confecting project of composite bonded material with orthogonal experiment was optimized. The research results showed that the thermal properties of the compositebonded material improved with the percentage of thethermal conducting filler Al2O3 increasing, composites with 10 μm Al2O3 fillers had better thermal performance than the composites with 35 μm Al2O3fillers.For 10 μm Al2O3 fillers, which treated by 8% concentration coupling agent had the highest thermal conductivity.The thermal conductivity of the composites could be significantly improved by using the appropriate ratio of the thermal conductive fillers, diluents and coupling agents.

Key words: compositebonded material, thermal conductivity, thermal contact resistance, preparationoptimization, orthogonal experiment

CLC Number: 

  • TK124
[1] HU P, YAO J J, JCHEN Z S. Analysis for composite zeolite/foam aluminumwater mass recovery adsorption refrigeration system driven by engine exhaust heat[J]. Energy Conversion and Management, 2009, 50(2):255-261.
[2] 卢允庄,王如竹,姜周曙. 固体吸附式制冷技术及其研究进展[J]. 能源技术, 2001, 22(3):91-95. LU Yunzhang, WANG Ruzhu, JIANG Zhoushu. Solid adsorption refrigeration and its development[J]. Energy Technology, 2001, 22(3):91-95.
[3] CHOUDHURY B, SAHA B B, CHATTERJEE P K, et al. An overview of developments in adsorption refrigeration systems towards a sustainable way of cooling[J]. Applied Energy, 2013, 10(4):554-567.
[4] 王如竹,王丽伟,吴静怡. 吸附式制冷理论及应用[M]. 长春:东北师范大学出版社,1995.
[5] FAN Y, LUO L, SOUYRI B. Review of solar sorption refrigeration technologies: Development andapplications[J]. Renewable and Sustainable Energy Reviews, 2007, 11(8):1758-1775.
[6] WANG L, TAMAINOT-TELTO Z, METCALF S J, et al. Anisotropic thermal conductivityand permeability of com-pacted expanded natural graphite[J]. Applied Thermal Engineering, 2010, 30(13):1805-1811.
[7] 罗云军,王长贵,王清.太阳能吸附式制冷系统[M].北京:化学工业出版社,2007.
[8] WANG L, TAMAINOT-TELTO Z, THORPE R, et al. Study of thermal conductivity, permeability, and ads-orptionperformance of consolidated composite activated carbon adsorbent for refrigeration[J]. Renewable Energy, 2011, 36(8):2062-2066.
[9] BU X, LU Z, WANG L. Preparation of composite ads-orbentwith high performance of heat and mass transfer[J]. Chinese Science Bulletin, 2013, 58(30):3709-3714.
[10] WANG K, WU J, XIA Z, et al. Design and performance prediction of a novel double heat pipes type adsorption chiller for fishing boats[J]. Renewable Energy, 2008, 33(4):780-790.
[11] OLIVEIRA R, WANG R. A consolidated calcium chlo-rideexpanded graphite compound for use in sorption refrigeration systems[J]. Carbon, 2007, 45(2):390-396.
[12] KLEIN H P, GROLL M. Heat transfer characteristics of expanded graphite matrices in metal hydride beds[J]. International Journal of Hydrogen Energy, 2004, 29(14):1503-1511.
[13] LIU S, SAKR M. A comprehensive review on passive heat transfer enhancements in pipe exchangers[J]. Renewable & Sustainable Energy Reviews, 2013, 19(1):64-81.
[14] JONG Hun,HAN Ken. Gas permeability of expanded graphite—metallic salt composite[J]. Applied Thermal Engineering, 2001,21(4):453-463
[15] BU X, LU Z, WANG L. Preparation of composite ads orbent with high performance of heat and mass transfer[J]. Chinese Science Bulletin, 2013, 58(30):3709-3714.
[16] ZHU D, WANG S. Experimental investigation of contact resistance in adsorber of solar adsorption refrigeration[J]. Solar Energy, 2002, 73(3):177-185.
[17] 鲍泽威, 杨福胜, 吴震,等. 金属氢化物反应器吸氢过程的热质传递特性分析[J]. 西安交通大学学报, 2012, 46(9):49-54. BAO Zewei, YANG Fusheng, WU Zhen, et al. Metal hydride hydrogen absorption reactor thermal mass transfer characteristics of the process of analysis[J]. Journal of Xi'an Jiaotong University, 2012, 46(9):49-54.
[18] 石耀刚, 王建华, 赵小东.低黏度环氧灌封胶的研制及应用[J]. 黏接, 2006, 27(2):55-56. SHI Yaogang, WANG Jianhua, ZHAO Xiaodong. Development and utilization of low viscosity epoxy pouring sealant[J].Chemical Industry and Engineering Progess, 2006, 27(2):55-56.
[19] FUJIOKA K, SUZUKI H. Thermophysical properties and reaction rate of composite reactant of calcium chloride and expanded graphite[J]. Applied Thermal Engineering, 2013, 50(2):1627-1632.
[20] WANG K, WU J Y, WANG R Z, et al. Composite adsorbent of CaCl2 and expanded graphite for adsorption ice maker on fishing boats[J]. International Journal of Refrigeration, 2006, 29(2):199-210.
[1] ZHANG Luchen, LI Shuchen, LI Shucai, LIAO Qikai. Effect on the performance of shotcrete mixed with silica fume and fly ash [J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2016, 46(5): 102-109.
[2] LUO Yanhua, SHE Shijie, CAO Weiguo, PAN Feng. Effects of reaction conditions on the size distribution of iron phosphate [J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2015, 45(1): 82-87.
[3] WANG Gang1, 2, JIANG Yu-jing2, LI Shucai3. Rapid feedback analysis method for underground caverns during constructing [J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2011, 41(4): 133-136.
[4] YANG Jing,YUE Qin-yan,LI Ying,LI Ren-bo,GAO Bao-yu . Application of modified activated carbon fiber in the treatment of phosphorus-containing wastewater [J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2008, 38(1): 92-95 .
[5] AWANG Changchun,MIN Guanghui,SukBong Kang . [J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2006, 36(5): 13-16 .
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
No Suggested Reading articles found!