您的位置:山东大学 -> 科技期刊社 -> 《山东大学学报(工学版)》

山东大学学报 (工学版) ›› 2021, Vol. 51 ›› Issue (1): 87-93.doi: 10.6040/j.issn.1672-3961.0.2020.437

• • 上一篇    

输电塔单双角钢过渡节点计算方法

徐再根1,刘正伟1,刘文棚2,周梦瑶2,刘俊才2,田利2*   

  1. 1. 山东电力工程咨询院有限公司, 山东 济南 250013;2. 山东大学土建与水利学院, 山东 济南 250061
  • 发布日期:2021-03-01
  • 作者简介:徐再根(1980— ),男,山东莱州人,硕士,主要研究方向为输电线路结构设计与分析. E-mail:xuzaigen@sdepci.com. *通信作者简介:田利(1982— ),男,山东枣庄人,教授,博导,主要研究方向为结构防灾减灾. E-mail:tianli@sdu.edu.cn
  • 基金资助:
    国家自然科学基金面上项目(51778347);山东大学青年学者未来计划(2017WLJH33)

Calculation method of the single-double angle joints in transmission towers

XU Zaigen1, LIU Zhengwei1, LIU Wenpeng2, ZHOU Mengyao2, LIU Juncai2, TIAN Li2*   

  1. 1. Shandong Electric Power Engineering Consulting Institute Co., Ltd., Jinan 250013, Shandong, China;
    2. School of Civil Engineering, Shandong University, Jinan 250061, Shandong, China
  • Published:2021-03-01

摘要: 为有效提高结构承载性能,在输电塔单肢角钢主材的下部采用组合双角钢的方法,依托输电线路实际工程,选取输电塔中5个典型的单双角钢过渡节点,利用ABAQUS软件建立精细化有限元模型,通过数值模拟分析过渡节点的传力机理和承载力特性,开展不同偏心距的过渡节点受力分析,提出考虑弯矩调整系数和弯矩强化系数为主要控制参数的水平板厚度计算公式。

关键词: 单双角钢过渡节点, 水平板, 输电塔, 数值模拟, 承载力

Abstract: The adoption of combined double angle steel in the lower part of single angle steel as the main material was a common method to effectively improve the bearing performance of the transmission tower, which was conducive to clarifying the force transmission path between variable sections while ensuring high material utilization. However, there were still lack of systematic research and blank in the calculation codes for such joints. Consequently, based on the actual project, 5 typical single-double angle steel joints were selected and modelled in ABAQUS software. The bearing capacity characteristics and force transmission mechanism of the joints were analyzed through numerical simulation. Considering that the bending moment was the main factor affecting the performance of the horizontal plate, different single-double angle steel joints were simulated by changing the eccentricity. The bending moment adjustment factor and the bending moment enhancement factor were raised as the main control parameters in the horizontal plate thickness calculation formula.

Key words: single-double angle steel joints, horizontal plate, transmission tower, numerical simulation, bearing capacity

中图分类号: 

  • TU359
[1] 电力规划设计总院. 架空送电线路杆塔结构设计技术规定:DL/T5154—2012[S]. 北京: 中国计划出版社, 2012.
[2] 电力规划设计总院. 110~750 kV架空输电线路设计规范:GB50545—2010[S]. 北京: 中国计划出版社, 2010.
[3] 杨利容, 郑勇. 单角钢变双角钢节点试验研究分析[J]. 四川建筑科学研究, 2010, 36(1): 40-43. YANG Lirong, ZHENG Yong. Experimental research on the joint connecting single angle to double angle[J]. Sichuan Building Science, 2010, 36(1): 40-43.
[4] 朱昌建,张大长,韩军科. 单、双角钢过渡节点轴压承载力特性的研究[J]. 工业建筑, 2016, 46(8): 16-20. ZHU Changjian, ZHANG Dachang, HAN Junke. Analysis of compressive strength of transitional joints of single and double angle[J]. Industrial Construction, 2016, 46(8): 16-20.
[5] 陈旭阳. 特高压输电铁塔单双角钢变换关键节点承载能力研究[D]. 南昌: 南昌大学, 2016. CHEN Xuyang. Load-bearing capacity of the key conversion nodes of single-and-dual-angle steel for ultra-high-voltage power transmission tower[D]. Nanchang: Nanchang University, 2016.
[6] 杨垂玮,孟宪乔,兰志文,等. 输电铁塔单双角钢变换节点试验研究与承载力计算方法[J]. 钢结构, 2017, 32(6): 59-65. YANG Chuiwei, MENG Xianqiao, LAN Zhiwen, et al. Bearing capacity calculation method and experimental study of the key conversion joints of single-angle and dual-angle steel for power transmission tower[J]. Steel Construction, 2017, 32(6): 59-65.
[7] 余亮,王作民,吴森坤, 等. 架空输电线路角钢塔单双角钢连接节点设计研究[J]. 钢结构, 2018, 33(3): 63-67. YU Liang, WANG Zuomin, WU Senkun, et al. Design and research on single and double angle joints of single-steel tower of overhead transmission line tower[J]. Steel Construction, 2018, 33(3): 63-67.
[8] 薛晓敏, 袁红丽, 饶翼, 等. 输电铁塔单变双拼角钢转换节点承载力研究[J]. 西安交通大学学报, 2020, 54(8): 11-19. XUE Xiaomin, YUAN Hongli, RAO Yi, et al. Bearing capacity of conversion joints between single-angle and dual-angle steel in steel pylons[J]. Journal of Xi'an Jiaotong University, 2020, 54(8): 11-19.
[1] 宋修广,杨鹤,陈晓燕,崔文杰,岳红亚,张恺,田隽. 砂土中浅埋竖向锚定板极限承载力[J]. 山东大学学报 (工学版), 2021, 51(1): 24-31.
[2] 孙杰,武科,郑扬,李树忱,袁超,王修伟. 城市地铁TBM隧道掘进诱发既有建筑物变形的空间属性效应[J]. 山东大学学报 (工学版), 2021, 51(1): 32-38.
[3] 苏思博,王国清,贾献卓,李志聪,黄志刚. 剪跨比对插槽式连接空心管墩抗震性能影响[J]. 山东大学学报 (工学版), 2021, 51(1): 39-45.
[4] 闫吉庆,王效嘉,田茂诚. 含不凝气蒸汽在锯齿形表面的凝结传热特性[J]. 山东大学学报 (工学版), 2020, 50(6): 129-134.
[5] 陈禹成,王朝阳,郭明,林鹏. 隐伏溶洞对隧道围岩稳定性影响规律及处治技术[J]. 山东大学学报 (工学版), 2020, 50(5): 33-43.
[6] 祁金胜,曹洪振,石岩,杜文静,王湛. 虾米腰弯管内置导流板优化[J]. 山东大学学报 (工学版), 2020, 50(5): 64-69, 76.
[7] 曹洪振,祁金胜,袁宝强,杜文静,王湛. 偏心方圆节扩散管数值模拟[J]. 山东大学学报 (工学版), 2020, 50(5): 77-82.
[8] 王春国. 偏压大跨小净距公路隧道施工力学行为[J]. 山东大学学报 (工学版), 2020, 50(4): 85-89.
[9] 胡伟. 基于孔隙尺度下丝网多孔介质通道流阻特性[J]. 山东大学学报 (工学版), 2019, 49(6): 119-126.
[10] 周慧琳,邱燕. 矩形蓄热单元内石蜡的相变传热特性[J]. 山东大学学报 (工学版), 2019, 49(4): 99-107.
[11] 刘明才. 大断面小净距公路隧道施工影响分析[J]. 山东大学学报 (工学版), 2019, 49(4): 78-85.
[12] 张宇磊,王勇,谢玉东,孙光,王艳芸,韩家桢. 新型液态金属磁流体发电动力学特性数值模拟[J]. 山东大学学报 (工学版), 2019, 49(1): 101-106.
[13] 王忠啸,崔新壮,崔社强,张磊,车华桥,苏俊伟. 咸水区水泥土桩劣化及改性对道路复合地基的影响[J]. 山东大学学报(工学版), 2018, 48(4): 69-77.
[14] 陈瑞,李红伟,田靖. 磁极数对径向磁轴承承载力的影响[J]. 山东大学学报(工学版), 2018, 48(2): 81-85.
[15] 宋贵杰. 浅埋软岩段隧道进洞施工变形特征与失稳分析[J]. 山东大学学报(工学版), 2018, 48(2): 53-60.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
No Suggested Reading articles found!