JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE) ›› 2016, Vol. 46 ›› Issue (6): 76-82.doi: 10.6040/j.issn.1672-3961.0.2016.016

Previous Articles     Next Articles

Design and performance of oblique and vertical compact micro fluidized beds

LI Xiaofei1,2, WANG Lei1*, JIA Lei1, CAI Wenjian2   

  1. 1. School of Control Science and Engineering, Shandong University, Jinan 250061, Shandong, China;
    2. School of Electrical and Electronic Engineering, Nanyang Technological University, Singapore 639798, Singapore
  • Received:2016-01-11 Online:2016-12-20 Published:2016-01-11

PDF (PC)

429

Abstract: In order to reduce pressure drop and improve adsorbent utilization in the CO2 capture system using solid adsorbents, a novel oblique and vertical compact micro fluidized beds(OCMFB and CMFB)reactors were proposed. The performance of the OCMFB and CMFB reactors for CO2 capture when the volume fraction of CO2 is 0.5% using solid adsorbents were experimentally studied and compared to that of the radial flow fixed bed(RFFB)reactor. The results showed that the pressure drop in the OCMFB reactor was 82% of that in the CMFB reactor, reduced by 14%~323% compared to the RFFB reactor; the breakthrough time for CO2 adsorption in the CMFB reactor was 109% of that in the OCMFB reactor, increased by 44% compared to the RFFB reactor due to the fluidization of the adsorbents in the OCMFB and CMFB reactors other than the statics in the RFFB reactor. The attrition of the adsorbents in both OCMFB and CMFB reactors were equal to that in the RFFB reactor, but the adsorption capacity for CO2 in both OCMFB and CMFB reactors were more stable than that in the RFFB reactor after 10 cycles of CO2 capture.

Key words: radial flow fixed bed, solid adsorbents, fluidized bed, CO2 capture

CLC Number: 

  • TH69
[1] GOEPPERT A, CZAUN M, PRAKASH G K S, et al. Air as the renewable carbon source of the future: an overview of CO2 capture from the atmosphere [J]. Energy & Environmental Science, 2012, 5(7):7833-7853.
[2] KIM M K, BALDINI L, LEIBUNDGUT H, et al. A novel ventilation strategy with CO2 capture device and energy saving in buildings [J]. Energy and Buildings, 2015, 87(1):134-141.
[3] FAN Y, KAMEISHI K, ONISHI S, et al. Field-based study on the energy-saving effects of CO2 demand controlled ventilation in an office with application of energy recovery ventilators[J]. Energy and Buildings, 2014, 68(1):412-422.
[4] SJOSTROM S, KRUTKA H. Evaluation of solid sorbents as a retrofit technology for CO2 capture [J]. Fuel, 2010, 89(6):1298-1306.
[5] 刘长天, 李庆亮, 李英杰, 等. 木醋废液调质石灰石循环捕集CO2 反应特性 [J]. 山东大学学报(工学版), 2013, 43(3):82-86. LIU Changtian, LI Qingliang, LI Yingjie, et al. Cyclic carbonation characteristics of limestone modified by waste wood vinegar[J]. Journal of Shandong University(Engineering Science), 2013, 43(3):82-86.
[6] SAMANTA A, ZHAO A, SHIMIZU G K H, et al. Post-combustion CO2 capture using solid sorbents: a review[J]. Industrial & Engineering Chemistry Research, 2012, 51(4):1438-1463.
[7] ZHANG W, LIU H, SUN C, et al. Performance of polyethyleneiminesilica adsorbent for post-combustion CO2 capture in a bubbling fluidized bed[J]. Chemical Engineering Journal, 2014, 251(5):293-303.
[8] WANG J, WANG M, LI W, et al. Application of polyethylenimine-impregnated solid adsorbents for direct capture of low-concentration CO2[J]. American Institute of Chemical Engineers Journal, 2015, 61(3):972-980.
[9] 杨春振, 段钰锋, 孙荣峰, 等. 埋管流化床颗粒流动行为的数值模拟[J]. 化工学报, 2013, 64(8):2788-2793. YANG Chunzhen, DUAN Yufeng, SUN Rongfeng, et al. Numerical study of solids behavior in fluidized bed with multi-immersed tubes[J]. Journal of Chemical Industry and Engineering, 2013, 64(8):2788-2792.
[10] RIDHA F N, MANOVIC V, MACCHI A, et al. CO2 capture at ambient temperature in a fixed bed with CaO-based sorbents [J]. Applied Energy, 2015, 140(140):297-303.
[11] 任立波, 尚立宝, 闫日雄, 等. 脉冲鼓泡床内鼓泡和颗粒混合特性的CFD-DEM数值模拟[J]. 山东大学学报(工学版), 2015, 45(2): 62-66. REN Libo, SHANG Libao, YAN Rixiong, et al. CFD-DEM simulation of bubbling and particle mixing properties in pulsed jet fluidized bed[J]. Journal of Shandong University(Engineering Science), 2015, 45(2):62-66.
[12] 贺婷婷, 钟文琪, 李蔚玲, 等. 三相流化床流动结构特征的小波分析[J]. 东南大学学报(自然科学版), 2014, 44(3): 573-578. HE Tingting, ZHONG Wenqi, LI Weiling, et al. Characteristics of flow patterns in three-phase fluidized bed by wavelet analysis[J]. Journal of Southeast University(Natural Science Edition), 2014, 44(3):573-578.
[13] MULGUNDMATH V P, JONES R A, TEZEL F H, et al. Fixed bed adsorption for the removal of carbon dioxide from nitrogen: break through behaviour and modelling for heat and mass transfer[J]. Separation and Purification Technology, 2012, 85(6):17-27.
[14] YANG W C, HOFFMAN J. Exploratory design study on reactor configurations for carbon dioxide capture from conventional power plants employing regenerable solid sorbents[J]. Industrial & Engineering Chemistry Research, 2009, 48(1):341-351.
[15] BLAMEY J, AL-JEBOORI M J, MANOVIC V, et al. CO2 capture by calcium aluminate pellets in a small fluidized bed[J]. Fuel Processing Technology, 2016, 142:100-106.
[16] DANG N T Y, GALLUCCI F, VAN SINT ANNALAND M. An experimental investigation on the onset from bubbling to turbulent fluidization regime in micro-structured fluidized beds[J]. Powder Technology, 2014, 256(2):166-174.
[17] HUANG W C, CHOU C T. Comparison of radial-and axial-flow rapid pressure swing adsorption processes[J]. Industrial & Engineering Chemistry Research, 2003, 42(9):1998-2006.
[18] TARKA T J, CIFERNO J P, GRAY M L, et al. CO2 capture systems using amine enhanced solid sorbents[C] //Proceedings of Fifth Annual Conference on Carbon Capture and Sequestration. Alexandria, USA:[s.n.] , 2006:144-151.
[19] TIAN Q, HE G, WANG Z, et al. A novel radial adsorber with parallel layered beds for prepurification of large-scale air separation units[J]. Industrial & Engineering Chemistry Research, 2015, 54(30): 7502-7515.
[20] YU J, ZENG X, ZHANG J, et al. Isothermal differential characteristics of gas-solid reaction in micro-fluidized bed reactor[J]. Fuel, 2013, 103(1):29-36.
[1] LIU Chang-tian1, LI Qing-liang2, LI Ying-jie1*, SUN Rong-yue1, LU Chun-mei1. Cyclic carbonation characteristics of limestone modified by waste wood vinegar [J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2013, 43(3): 82-86.
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed   
[1] CHEN Rui, LI Hongwei, TIAN Jing. The relationship between the number of magnetic poles and the bearing capacity of radial magnetic bearing[J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2018, 48(2): 81 -85 .
[2] CHENG Daizhan, LI Zhiqiang. A survey on linearization of nonlinear systems[J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2009, 39(2): 26 -36 .
[3] WANG Yong, XIE Yudong. Gas control technology of largeflow pipe[J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2009, 39(2): 70 -74 .
[4] LIU Xin 1, SONG Sili 1, WANG Xinhong 2. [J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2009, 39(2): 98 -100 .
[5] . [J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2009, 39(2): 104 -107 .
[6] CHEN Huaxin, CHEN Shuanfa, WANG Binggang. The aging behavior and mechanism of base asphalts[J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2009, 39(2): 125 -130 .
[7] BO De-Yun, ZHANG Dao-Jiang. Adaptive spectral clustering algorithm[J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2009, 39(5): 22 -26 .
[8] . [J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2009, 39(2): 131 -136 .
[9] LI Shijin, WANG Shengte, HUANG Leping. Change detection with remote sensing images based on forward-backward heterogenicity[J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2018, 48(3): 1 -9 .
[10] ZHAO Ke-Jun, WANG Xin-Jun, LIU Xiang, CHOU Yi-Hong. Algorithms of continuous top-k join query over structured overlay networks[J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2009, 39(5): 32 -37 .
Copyright 2018 © Editorial office of Journal of Shandong University (Engineering Science)
Supported by Beijing Magtech Co.Ltd