JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE) ›› 2018, Vol. 48 ›› Issue (2): 81-85.doi: 10.6040/j.issn.1672-3961.0.2017.607

Previous Articles     Next Articles

The relationship between the number of magnetic poles and the bearing capacity of radial magnetic bearing

CHEN Rui, LI Hongwei*, TIAN Jing   

  1. School of Electrical Engineering, Shandong University, Jinan 250061, Shandong, China
  • Received:2017-12-13 Online:2018-04-20 Published:2017-12-13

Abstract: The design principles of air gap, magnetic pole, rotor, stator, magnetic pole area and coil were given on the basis of practical engineering experiences. The structures of radial magnetic bearing with different rotor diameter and different magnetic pole number were designed. The finite element analysis software was used to simulate the electromagnetic field of radial magnetic bearing. The electromagnetic force and the magnetic field distribution were obtained. According to the simulation results, the influence of the number of poles on the bearing capacity of bearings under different rotor diameters was studied. The simulation results showed that the capacity of the radial magnetic bearing decreased significantly with the increase of the number of poles when the rotor diameter did not exceed 150 mm. While, the number of poles did not have a significant effect on the capacity of radial magnetic bearings when the rotor diameter reached 150 mm.

Key words: bearing capacity, finite element analysis, number of magnetic pole, radial magnetic bearing

CLC Number: 

  • TH69
[1] 张维煜, 朱熀秋, 袁野. 磁悬浮轴承应用发展及关键技术综述[J]. 电工技术学报, 2015, 30(12):12-20. ZHANG Weiyu, ZHU Huangqiu, YUAN Ye. Study on key technologies and applications of magnetic bearings[J]. Transactions of China Electrotechnical Society, 2015, 30(12):12-20.
[2] 李媛媛, 朱熀秋, 朱利东. 磁悬浮轴承发展及关键技术研究现状[J]. 微电机, 2014(6):69-73. LI Yuanyuan, ZHU Huangqiu, ZHU Lidong. Development and research status of key technologies on magnetic bearings[J]. Micromotors, 2014(6):69-73.
[3] 施韦策G, 布鲁勒H, 特拉克斯勒A. 主动磁轴承基础、性能及应用[M]. 虞烈,袁祟军,译.北京:新时代出版社,1997:1-22.
[4] GERHARD Schweitzer, ERICH Maslen.磁悬浮轴承:理论、设计及旋转机械应用[M].徐旸,张剀,赵雷,译.北京:机械工业出版社,2012:1-25.
[5] 胡业发, 周祖德, 江征风.磁力轴承的基础理论与应用[M].北京:机械工业出版社,2006:1-5.
[6] 丁国平, 胡业发, 周祖德. 径向磁力轴承磁极布置对磁场和磁力的影响[J].中国机械工程, 2008, 19(19):2364-2367. DING Guoping, HU Yefa, ZHOU Zude. Effects of magnetic pole arrangement on magnetic field and force in radial magnetic bearings[J]. China Mechanical Engineering, 2008, 19(19): 2364-2367.
[7] 吴刚, 张育林, 刘昆. 电磁轴承结构参数设计研究[J]. 机械科学与技术, 2005, 24(6):713-715. WU Gang, ZHANG Yulin, LIU Kun. Research on structure parameter design of electromagnetic bearings[J]. Mechanical Science and Technology, 2005, 24(6):713-715.
[8] 蔡敏, 朱熀秋. 轴向磁轴承参数设计与性能分析[J]. 微电机, 2010, 43(10):22-25. CAI Min, ZHU Huangqiu. Parameter design and performance analysis for axial magnetic bearing[J]. Micromotors, 2010, 43(10):22-25.
[9] MIZUNO T, HIGHCHI T. Experimental measurement of rotational losses in magnetic bearings[C] // Proceedings of 4th International Symposium on Magnetic Bearings. Zurich, Switzerland: 4th International Symposium on Magnetic Bearings, 1994:591-595.
[10] STEPHENS L S, KNOSPE C R. Effects of magnetic pole arrangement on core loss in laminated high-speed magnetic journal bearings[J]. IEEE Transactions on Magnetics,1996, 32(4):3246-3252.
[11] 张云鹏, 刘淑琴, 李红伟. 基于磁路分析的轴向混合磁轴承径向承载力解析计算[J]. 电工技术学报, 2012, 27(5):137-142. ZHANG Yunpeng, LIU Shuqin, LI Hongwei. Calculation of radial electromagnetic force of axial hybrid magnetic bearing based on magnetic circuit analysis[J]. Transactions of China Electrotechnical Society, 2012, 27(5):137-142.
[12] 占智军. 主动电磁轴承的设计与分析[D]. 杭州:浙江大学,2013:8. ZHAN Zhijun. Design and analysis of active magnetic bearings[D].Hangzhou:Zhejiang University, 2013:8.
[13] 陈浩. 电磁轴承系统的设计与研究[D]. 北京:北京工业大学,2009:18. CHEN Hao. Design and research on the magnetic bearing system[D]. Beijing:Beijing University of Technology, 2009:18.
[14] 朱坤.磁悬浮转子虚拟样机中结构设计系统的研究与开发[D]. 武汉:武汉理工大学, 2007:22-26. ZHU Kun. Research and development of structural design on magnetic suspension rotor's virtual prototype[D].Wuhan:Wuhan University of Technology, 2007:22-26.[15] 汤银龙. 600 Wh飞轮储能系统的电磁轴承结构设计[D]. 哈尔滨:哈尔滨工程大学, 2013:25. TANG Yinlong. Structure design of the active magnetic bearing based on 600 Wh flywheel energy storage system [D]. Harbin: Harbin Engineering University, 2013:25.
[16] 赵博, 张洪亮. Ansoft 12在工程电磁场中的应用[M]. 北京:中国水利水电出版社,2013:2-44.
[17] 丁国平, 周祖德, 胡业发. 磁力轴承旋转电磁场的有限元计算及分析[J]. 武汉理工大学学报, 2012, 34(1):114-117. DING Guoping, ZHOU Zude, HU Yefa. Calcuulation and analysis of magnetic bearings rotating magnetic field with field element method[J]. Journal of Wuhan University of Technology, 2012, 34(1):114-117.
[18] 李泽辉, 滕万庆, 李翀. 磁悬浮储能飞轮用径向磁轴承磁路仿真分析[J]. 储能科学与技术, 2014,3(4):308-311. LI Zehui, TENG Wanqing, LI Chong. Finite element analysis of a magnetic circuit of radial magnetic bearing for magnetically suspended flywheels[J]. Energy Storage Science and Technology, 2014, 3(4):308-311.
[19] 杨芳芳, 吕建超. 推力磁轴承的优化设计与有限元分析[J]. 燃气涡轮试验与研究, 2010, 23(2):43-46. YANG Fangfang, LYU Jianchao. Optimization design and finite element analysis for thrust magnetic bearings[J]. Gas Turbine Experiment and Research, 2010, 23(2):43-46.
[20] 李红伟, 于文涛, 刘淑琴. 基于ANSYS的磁悬浮挠性转子模态分析与设计[J]. 中国机械工程, 2014, 25(11):1447-1452, 1459. LI Hongwei, YU Wentao, LIU Shuqin. Mode analysis and design of maglev flexible rotor with ansys[J]. China Mechanical Engineering, 2014, 25(11):1447-1452, 1459.
[1] LI Lianxiang, LI Xianjun. Influence of squeezed branch pile bearing capacity on different numbers and positions of enlarged parts [J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2016, 46(5): 88-94.
[2] WANG Haiyuan1,2, ZHANG Long3, ZHANG Lewen1*, ZHANG Feng1. Temperature monitoring and finite element analysis of
preventing construction cracks in a continuous box girder
[J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2011, 41(3): 82-88.
[3] ZHOU Hai-ying1, LI Li-xin2, CHEN Ting-guo1. Experiments and calculation method for bearing capacity of the lining segment of metro shield tunneling [J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2010, 40(4): 84-87.
[4] XIAO Li-Li, CHEN Wei-Fang, YE Wen-Hua, YANG Qi, LIU Shi-Hao. Finite element analysis and optimization design for the vertical slide board of the ‘boxinbox’ structure [J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2010, 40(1): 78-83.
[5] WANG Lipeng1, GONG Sifeng2. Study of electrochemical corrosion and bearing capacity of corroded reinforced concrete beams [J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2009, 39(2): 113-117.
[6] LIU Yu-zhen,XU Cheng-qiang . Post-processing of finite element analysis for the 3D microstructure of polycrystalline materials [J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2008, 38(2): 13-17 .
[7] LU Dong,LI Jian-feng,SUN Jie,JIANG Feng . Finite element analysis for the verification of the dynamic clamping force during machining of the aero frame shape workpiece [J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2007, 37(1): 19-22 .
[8] LIN Yan,WEI Dong, . LIN Yan1,WEI Dong2 [J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2006, 36(3): 103-107 .
[9] LIN Yan,WEI Dong, . LIN Yan1,WEI Dong2 [J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2006, 36(3): 103-107 .
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
No Suggested Reading articles found!