JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE) ›› 2016, Vol. 46 ›› Issue (6): 113-119.doi: 10.6040/j.issn.1672-3961.0.2016.137

Previous Articles     Next Articles

Model test of the Beipan River's new open-web continuous rigid frame bridge corner node

PENG Yuancheng1, DONG Xu2*, LIANG Na3, DENG Zhenquan2   

  1. 1. CCCC Second Highway Consultant Co. LTD, Wuhan 430057, Hubei, China;
    2. Geotechnical and Structural Engineering Research Center, Shandong University, Jinan 250061, Shandong, China;
    3. Shandong Bureau of Quality and Technical Supervision Information Center, Jinan 250002, Shandong, China
  • Received:2016-04-26 Online:2016-12-20 Published:2016-04-26

PDF (PC)

614

Abstract: In order to investigate mechanical performances of open-web continuous rigid frame bridge corner node, 1∶5 scaled model test girder was designed. Through the static load test, the static data acquisition instrument and deflection measurement sensors were used to measure the strain and deflection of model test girders under cantilever state. The finite element analysis(FEA)numerical model of test girder had been conducted, and numerical results were compared with test results. The results showed that, the corner nodes of open-web continuous rigid frame bridge had mechanical properties that were different from those of conventional slant-legged rigid frame bridge. The longitudinal top plates of model girder were subjected to pressure stress. Corner node region was under so high local stress that must be strengthened during design process. Shear lag effect also existed in the corner node model. Numerical simulation results were basically in accord with test data. This research revealed the mechanical performances of open-web continuous rigid frame bridge corner node, and verified the feasibility of numerical simulation, and provided a theoretical guild for same 山 东 大 学 学 报 (工 学 版)第46卷 - 第6期彭元诚,等:北盘江新型空腹式连续刚构桥角隅节点模型试验研究 \=-type bridge corner node design.

Key words: bridge engineering, open-web continuous rigid-frame, mechanical performances, corner node, experimental research, numerical simulation

CLC Number: 

  • U448.23
[1] YOSHIKAWA M, HAYASHI H, KAWAKITA S, et al. Construction of Benten viaduct, rigid-frame bridge with seismic isolators at the foot of piers[J]. Cement and Concrete Composites, 2000, 22(1):39-46.
[2] 徐向峰, 赵香萍, 张峰, 等. 重载铁路连续刚构桥徐变精细化数值分析[J]. 山东大学学报(工学版), 2015, 45(4):69-74. XU Xiangfeng, ZHAO Xiangping, ZHANG Feng, et al. Refined analysis of creep effect for heavy haul railway continuous rigid frame bridge[J]. Journal of Shandong University(Engineering Science), 2015, 45(4):69-74.
[3] 石雄伟, 刘海鹏, 周勇军, 等. 双薄壁墩间距对连续刚构桥地震响应的影响[J]. 交通运输工程学报, 2010, 10(3): 35-40. SHI Xiongwei, LIU Haipeng, ZHOU Yongjun, et al. Effect of double-thin-wall distance on seismic response of continuous rigid frame bridge[J]. Journal of Traffic and Transportation Engineering, 2010, 10(3):35-40.
[4] 宗周红, 高铭霖, 夏樟华. 基于健康监测的连续刚构桥有限元模型确认(I):基于响应面法的有限元模型修正[J]. 土木工程学报, 2011, 44(2): 90-98. ZONG Zhouhong, GAO Minglin, XIA Zhanghua. Finite element model validation of the continuous rigid frame bridge based on structural health monitoring Part I: FE model updating based on the response surface method[J]. China Civil Engineering Journal, 2011, 44(2):90-98.
[5] 郭健, 刘世忠,孙炳楠. 大跨度预应力斜腿刚构桥的结点应力分析[J]. 中国公路学报, 2002, 15(1):78-81. GUO Jian, LIU Shizhong, SUN Bingnan. Joints stress analysis of a prestressed-concrete slant-legged rigid frame bridge[J]. China Journal of Highway and Transport, 2002, 15(1):78-81.
[6] 勾红叶, 蒲黔辉, 施洲. 大跨度V形刚构拱组合桥V形墩梁节点模型试验研究[J]. 土木工程学报, 2010, 43(3): 99-105. GOU Hongye, PU Qianhui, SHI Zhou. Model test for the V-shape pier-girder joint of long-span V-shape rigid frame composite arch bridges[J]. China Civil Engineering Journal, 2010, 43(3):99-105.
[7] 宗昕, 彭元诚, 吴游宇, 等. 北盘江特大桥结构设计[J]. 公路, 2013, 8(8): 22-26. ZONG Xin, PENG Yuancheng, WU Youyi, et al. Structural design of Beipan river bridge[J]. Highway, 2013, 8(8):22-26.
[8] 杨书杨. 新型空腹式刚构桥与普通刚构桥的对比分析[D]. 武汉: 华中科技大学, 2013:19-46. YANG Shuyang. Comparison of open-web and ordinary rigid frame bridge[D]. Wuhan: Huazhong University of Science & Technology, 2013:19-46.
[9] 卢斌. 空腹式连续刚构桥静动力学特性[D]. 西安: 长安大学, 2014. LU Bin. The performance of opened-web continuous rigid frame bridge[D]. Xi'an: Chang'an University, 2014.
[10] 卢斌, 王凯华, 李高超, 等. 设计参数对空腹式连续刚构桥关键截面内力的影响[J]. 公路交通科技, 2014, 31(12): 73-77. LU Bin, WANG Kaihua, LI Gaochao, et al. Influence of design parameters on key section internal force in open-web continuous rigid frame bridge[J]. Journal of Highway and Transportation Research and Development, 2014, 31(12):73-77.
[11] 韩洪举, 黄坤全. 290 m空腹式刚构桥三角区施工技术[J]. 桥梁建设, 2011(3):81-84. HAN Hongju, HUANG Kunquan. Construction techniques for triangle area of a 290 m span open-web continuous rigid-frame bridge[J]. Bridge Construction, 2011(3):81-84.
[12] 黄坤全, 彭旭民. 空腹式连续刚构桥施工过程受力特性分析[J]. 桥梁建设, 2011(3):40-43. HUANG Kunquan, PENG Xumin. Analysis of mechanical behavior of a presressed concrete open-web continuous rigid-frame bridge in construction process[J]. Bridge Construction, 2011(3):40-43.
[13] 王立鹏, 巩思锋. 钢筋混凝土梁电化学锈蚀及受弯承载力试验研究[J]. 山东大学学报(工学版), 2009, 39(2): 113-117. WANG Lipeng, GONG Sifeng. Study of electrochemical corrosion and bearing capacity of corroded reinforced concrete beams[J]. Journal of Shandong University(Engineering Science), 2009, 39(2): 113-117.
[14] 管延华, 蒋斌松, 宋修广, 等. FRP—螺栓联合加固RC梁受剪承载能力试验研究[J]. 山东大学学报(工学版), 2010, 40(2): 82-87. GUAN Yanhua, JIANG Binsong, SONG Xiuguang, et al. Experimental study on RC beams strengthened in shear with hybrid bonding of FRP[J]. Journal of Shandong University(Engineering Science), 2010, 40(2): 82-87.
[15] SHAKYA K, WATANABEB K, MATSUMOTOA K, et al. Application of steel fibers in beam—column joints of rigid-framed railway bridges to reduce longitudinal and shear rebars[J]. Construction and Building Materials, 2012, 27: 482-489.
[16] 王海源, 章龙, 张乐文, 等. 预防连续箱梁施工裂缝的温度监测与有限元分析[J]. 山东大学学报(工学版), 2011, 41(3): 82-90. WANG Haiyuan, ZHANG Long, ZHANG Lewen, et al. Temperature monitoring and finite element analysis of preventing construction cracks in a continuous box girder[J]. Journal of Shandong University(Engineering Science), 2011, 41(3): 82-90.
[17] KALANTARI A, AMJADIAN M. An approximate method for dynamic analysis of skewed highway bridges with continuous rigid deck[J]. Engineering Structures, 2010, 32(9): 2850-2860.
[18] GIL B, BAYO E. An alternative design for internal and external semi-rigid composite joints part I: experimental research[J]. Journal of Engineering Structures, 2008, 30(1): 218-231.
[19] GIL B, BAYO E. An alternative design for internal and external semi-rigid composite joints part II: finite element modelling and analytical study[J]. Journal of Engineering Structures, 2008, 30(1): 232-246.
[20] 王恩东. 箱梁桥桥面铺装受力特性研究[J]. 山东大学学报(工学版), 2008, 38(2):71-76. WANG Endong. Strength characteristic analysis of box girder bridge pavement[J]. Journal of Shandong University(Engineering Science), 2008, 38(2):71-76.
[21] 王连广, 慕光波. 预应力空腹式钢骨混凝土梁受弯性能研究[J]. 工程力学, 2011, 28(8):113-118. WANG Lianguang, MU Guangbo. Research on bending performance of prestressed lattice type steel reinforced concrete beam[J]. Engineering Mechanics, 2011, 28(8):113-118.
[22] 中华人民共和国住房与城乡建设部. GB 50010—2010 混凝土结构设计规范[S]. 北京: 中国建筑工业出版社, 2010.
[1] SONG Guijie. Deformation characteristic and instability analysis for shallow soft rock section during tunnel-entering construction [J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2018, 48(2): 53-60.
[2] WANG Danhua, ZHANG Guanmin, LENG Xueli, XU Mengna, HAN Yuanyuan. The numerical simulation of two-phase flow distribution characteristics in T-tube [J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2018, 48(1): 89-95.
[3] XIA Mengran, LI Wei, FENG Xiao, ZHU Guangxuan, LI Xia. Grouting reinforcement and excavation stability on super-shallow buried and water-rich sand stratum subway transverse channel [J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2017, 47(2): 47-54.
[4] LYU Guoren, ZHANG Qun, NIU Ben, GAO Quanting, WU Zhaoshou. The effects of pile foundation of high-rise building on adjacent structures [J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2017, 47(1): 48-58.
[5] MI Chunrong, LI Jianming. Development and application of after grouting device for prestressed concrete pipe pile [J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2016, 46(4): 89-95.
[6] TANG Weize, OU Jinqiu, CUI Xinzhuang, LOU Junjie, XIAO Ming, ZHANG Jiong, HUANG Dan, HOU Fei. Field test and research on vehicle load induced dynamic pore pressure in asphalt pavement [J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2015, 45(6): 84-90.
[7] CAO Weidong, DAI Tao, YU Jinbiao, XI Kaihua, LU Tongchao, CHENG Aijie. An IMPIMC method for chemical simulation [J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2015, 45(1): 88-94.
[8] GAO Zhijun, CUI Xinzhuang, SUI Wei, GUO Hong, LIU Hang, LI Changyi, FENG Hongbo. Dynamic interaction and damage analysis of large runaway vehicle and tunnel lining [J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2014, 44(5): 49-57.
[9] ZHANG Tao, HAN Jitian, YAN Suying, YU Zeting, ZHOU Ran. The analysis and testing of thermal performance on solar evacuated tube [J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2014, 44(4): 76-83.
[10] ZHOU Qian, ZHAO Degang. Application of the horizontal jet grouting pile in water-bearing sandy layer of shallow excavating tunnel [J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2014, 44(4): 52-57.
[11] ZHANG Wenjun, LI Shucai, SU Maoxin*, XUE Yiguo, QIU Daohong. Detection  method of karst caves in city subway based on  the cross-hole resistivity tomography [J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2014, 44(3): 75-82.
[12] LIU Yang, GE Lian-sheng*. TE mode analysis based on a new Padé approximant BPM algrorithm [J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2014, 44(1): 19-23.
[13] WANG Jian-ming, PEI Xin-chao, FAN Xian-hang, LIU Wei, CAO Yan-chao. Numerical simulations of a particle impacting to affect the surface
morphology by SPH coupled FEM [J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2013, 43(5): 87-92.
[14] L Guo-ren1, SUI Bin2, WANG Yong-jin1, WU Jian-quan3. Study on numerical simulation and stability analysis shallow buried tunnel excavation under unsymmetrical  pressure [J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2013, 43(4): 68-73.
[15] ZHAO Ji-kun1,2, CHEN Jia-hong1. Soil slope and water content on soil slope stability influence experimental study under rainfall [J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2013, 43(2): 76-83.
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed   
[1] WANG Yong, XIE Yudong. Gas control technology of largeflow pipe[J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2009, 39(2): 70 -74 .
[2] . [J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2009, 39(2): 108 -112 .
[3] KONG Xian-Meng, JU Pei-Jun. New stability criterion for a class of uncertain neutral systems with time-varying delay[J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2009, 39(5): 48 -51 .
[4] DIAO Yong, TIAN Si-Meng, CAO Zhe-Meng. Geological work method for the construction of the Yichang Wanzhou Railway tunnel in high risk karst areas[J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2009, 39(5): 91 -95 .
[5] SHI Wen-Hua, LIU Wei-Dong, SUN Yong-Fu. Research of 1／3 dam breach simulation and personnel evacuation scenario based on digital elevation model DEM in a quake lake[J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2009, 39(5): 144 -148 .
[6] CHEN Peng, HU Wen-Rong, FEI Hai-Yan. Screening of a denitrifying bacterium strain LZ-14 and its nitrogen removal characteristics[J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2009, 39(5): 133 -138 .
[7] HE Dongzhi, ZHANG Jifeng, ZHAO Pengfei. Parallel implementing probabilistic spreading algorithm using MapReduce programming mode[J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 0, (): 22 -28 .
[8] JING Yunge, LI Tianrui. An incremental approach for reduction based on knowledge granularity[J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2016, 46(1): 1 -9 .
[9] CHEN Bin, CHEN Song-Can, PAN Zhi-Song, LI Bin. Survey of outlier detection technologies[J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2009, 39(6): 13 -23 .
[10] LI Xin-Cheng, SUN Dian-Zhu. The  GTK+ and VTK programming based on Python and its application[J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2009, 39(6): 78 -81 .
Copyright 2018 © Editorial office of Journal of Shandong University (Engineering Science)
Supported by Beijing Magtech Co.Ltd