JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE) ›› 2016, Vol. 46 ›› Issue (5): 116-119.doi: 10.6040/j.issn.1672-3961.0.2016.165
Previous Articles Next Articles
WEI Lulu1, LAI Yanhua1, LU Yongda2
CLC Number:
[1] 魏露露,陆永达,张继宇,等. 斯特林制冷机耦合超长线列焦平面探测器的冷量损失分析[J].低温工程,2014,201(5):29-33. WEI Lulu, LU Yongda, ZHANG Jiyu, et al. Charac-teristics of cold loss between stirling cryocooler and large infrared focal plane[J]. Cryogenics, 2014, 201(5):29-33. [2] 陆永达,朱魁章,杨坤,等.大冷量长寿命斯特林制冷机热环境适应性试验研究[J].低温与超导, 2012, 40(4):5-8. LU Yongda, ZHU Kuizhang, YANG Kun, et al. Thermo adaptability study on a high capacity long-life Stirling cryocooler[J]. Cryogenics, 2012, 40(4):5-8. [3] 纪国林,吴亦农,徐妙根.空间机械制冷机与红外探测器的耦合技术[J].真空与低温,1998,4(2):69-73. JI Guolin, WU Yinong, XU Miaogen. Technique for linking between space borne mechanical cryocooler and infrared detector[J]. Vacuum & Cryogenics, 1998, 4(2):69-73. [4] CAVENATI S, GRANDE C A, RODRIGUES A E. Separation of CH4/CO2/N2 mixtures by layered pressure swing adsorption for upgrade of natural gas [J]. Chemical Engineering Science, 2006, 61:3893-3906. [5] NETO C A R, SAUER I L. LNG as a strategy to establish developing countries gas markets:the Brazilian case [J]. Energy Policy, 2006, 34: 4103-4114. [6] 陈晓萍.微型斯特林制冷器与杜瓦瓶组件耦合漏热分析[J]. 红外技术, 2002,24(1): 23-26. CHEN Xiaoping. Thermal loos analysis for the dewar assembly coupling with the micro stirling cryocooler[J]. Infrared Technology, 2002, 24(1):23-26. [7] BAI D, FAN X J. On the combined heat transfer in the multilayer nongray porous fibrous insulation[J]. Journal of Quantitative Spectroscopy & Radioactive Transfer, 2007, 104:326-341. [8] LAA C, HIRSEH C, STIPSITZ J. Heat flow measurement and analysis of thermal vacuum insulation[J]. Advances in Cryogenic Engineering:Transaction of the Cryogenic Engineeering Conference CEC, 2008, 53:1351-1358. [9] CHEN H E. Thermal analysis and performance study for multilayer perforated insulation material used in space[J]. Applied Thermal Engineering, 2006, 26:2020-2026. [10] 陈国邦,张鹏. 低温绝热与传热技术[M]. 北京:科学出版社, 2004. [11] 陈国邦,颜鹏达,李金寿. 斯特林低温制冷机的研究与发展[J]. 低温工程, 2006, 153(5):1-10. CHEN Guobang, YAN Pengda, LI Jinshou. Research and development of stirling cryogenic refrigerator[J]. Cryogenics, 2006, 153(5):1-10. [12] KARANDIKAR A, FIEDLER A. Scaling STI's sapphire cryocooler for applications requiring higher heat loads [C] //Advances in Cryogenic Engineering: Transactions of the Cryogenic Engineering Conference CEC Volume 57. Los Angeles, USA: AIP Publishing, 2012, 1434(1): 675-682. [13] ERCOLANI E, PONCET J M, CHARLES I. Design and prototyping of a large capacity high frequency pulse tube[J]. Cryogenics, 2008, 48:439-447. [14] HIRAI H, SUZUKI Y, HIROKAWA M, et al. Deve-lopment of a turbine cryocooler for high temperature superconductor applications[J]. Physical C: Super Con-ductivity, 2009, 469(15):1857-1861. [15] CHRN R L, HENZLER G W, ROYAL J H, et al. Reliability test of a 1kW pulse tube cryocooler for HTS cable application[C] // Advances in Cryogenic Engineering: Transactions of the Cryogenic Engineering Conference CEC. Los Angeles, USA: AIP Conference Proceedings, 2010:727-735. [16] ALAN C, MATHIEU S, MICHAEL G, et al. CFD analysis of a diaphragm free piston Stirling cryocooler[J]. Cryogenics, 2016, 18(79):7-16. |
[1] | DONG Zhen, YANG Yonglu, XIONG Guodong, LAI Yanhua, LYU Mingxin. Preparation and optimization of compound bonded material used in reducing the contact thermal resistance [J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2017, 47(3): 143-150. |
[2] | DONG Zhen, LAI Yanhua, LYU Mingxin, ZHENG Haoyu, PAN Jihong. Comprehensive performance test and analysis of adsorbent [J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2016, 46(5): 120-125. |
[3] | LU Guoqiang, HAN Jitian, KONG Lingjian, CHEN Changnian, HU Guiqiu, CHEN Jun, LI Jiangfei. Effect of mass flux on onset of nucleate flow boiling of R134a and tube wall temperature characteristics [J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2016, 46(3): 117-122. |
[4] | GUAN Ning, LUAN Tao, LIU Zhigang, ZHANG Chengwu, JIANG Guilin, QIU Delai. Convective heat transfer in micro pin fin heat sinks with different cross section shapes under variable heating loads [J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2016, 46(2): 128-134. |
[5] |
ZHANG Lei, SUN Feng-zhong*, GAO Ming.
Quantitative analysis method for specific effect of crosswind on performance of natural draft wet cooling tower [J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2013, 43(5): 98-103. |
[6] |
CHE Cui-cui, TIAN Mao-cheng*, LENG Xue-li.
Numerical simulations on convective heat transfer characteristics of laminar flow with longitudinal vortex induced by winglets [J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2013, 43(5): 104-110. |
[7] | TAN Lu-zhi, HAN Ji-tian*, CHEN Chang-nian, KONG Ling-jian, JI Cui-lian, LU Guo-qiang. Fluid-to-fluid modeling of critical heat flux in horizontal helically coiled tubes [J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2013, 43(3): 87-93. |
[8] | XIA Jie1,2, CHANG Hai-ping1*. Thermally driven in porous medium in a centrifugal force field [J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2013, 43(1): 123-126. |
[9] | ZHANG Jing-zhi, TIAN Mao-cheng*, ZHANG Guan-min, LENG Xue-li. Effects of the contact points distribution on heat transfer and resistance performances of plate heat exchangers [J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2012, 42(6): 121-126. |
[10] | ZHAO Yuan-bin,SUN Feng-zhong,WANG Kai,GAO Ming . Three dimensional numerical analyses of heat and mass transfer in a wet cooling tower [J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2008, 38(5): 36-41 . |
[11] | LI Fei, SUN Fengzhong, SHI Yuetao, MA Lei. Experimental research and synergy analysis on characteristics of tube bundles [J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2014, 44(4): 70-75. |
|