Journal of Shandong University(Engineering Science) ›› 2021, Vol. 51 ›› Issue (3): 84-90.doi: 10.6040/j.issn.1672-3961.0.2020.243

Previous Articles     Next Articles

Method for safety management and control of tools and equipment used in substation based on ultra-wideband technology

LI Ying1, L(¨overU)Xuebin2, LI Yan1, SUN Shoujing3   

  1. 1. Laiwu Power Supply Company, State Grid Shandong Electric Power Company, Jinan 271100, Shandong, China;
    2. State Grid Shandong Electric Power Company, Jinan 250001, Shandong, China;
    3. School of Electrical Engineering, Shandong Universiy, Jinan 250061, Shandong, China
  • Online:2021-06-20 Published:2021-06-24

PDF (PC)

162

Abstract: A method for the safety management and control of construction tools based on ultra-wideband technology was propssed. The function ultra wide band technology information storage and high-precision positioning was used, through the link before, during, and after the use of tool management, to eliminate the blind area of tool information and safety management and control and prevent. Major hidden dangers to the safe operation of substations due to improper use of tools and improper disposal. In addition, through the on-site disposal of damaged tools, the management and control of tools was fundamentally improved.

Key words: ultra wide band technology, substation construction, tools and equipment, information storage and location, safety management and control

CLC Number: 

  • TM08
[1] 国家电网公司.国家电网公司电力安全工器具管理规定[M]. 北京: 中国电力出版社, 2014.
[2] 刘勇,陈海滨,刘方.基建现场巡检无人机智能感知系统的研究与应用[J]. 电力系统保护与控制, 2018, 46(15): 155-161. LIU Yong, CHEN Haibin, LIU Fang. Research and application of intelligent perception system for unmanned aerial vehicle inspection at construction site[J]. Power System Protection and Control, 2018, 46(15): 155-161.
[3] 任晓辉.电网调控自动化系统运行状态在线监视与智能诊断研究及应用[J]. 电力系统保护与控制, 2018, 46(11): 156-161. REN Xiaohui. Research and application of operating states of grid dispatching and control system[J]. Power System Protection and Control, 2018, 46(11): 156-161.
[4] 刘文霞,郝永康,张馨月,等. 基于数字化技术的电网资产管理关键技术及应用[J]. 电网技术, 2018, 42(9): 2742-2751. LIU Wenxia, HAO Yongkang, ZHANG Xinyue, et al. Digital technology based key technologies in power grid asset management and its application[J]. Power System Technology, 2018, 42(9): 2742-2751.
[5] 艾欣,乐小江,孙英云.基于物联网的未来电网资产管理形态[J]. 电力科学与技术学报, 2011, 26(4): 57-62. AI Xin, LE Xiaojiang, SUN Yingyun. Asset management study for future power grids based on the internet of things[J]. Journal of Electric Power Science and Technology, 2011, 26(4): 57-62.
[6] 蔡骥然,郑永康,周振宇,等. 智能变电站二次设备状态监测研究综述[J]. 电力系统保护与控制, 2016, 44(6):148-154. CAI Jiran, ZHENG Yongkang, ZHOU Zhenyu, et al. A survey of research on secondary device condition monitoring in smart substation[J]. Power System Protection and Control, 2016, 44(6): 148-154.
[7] 曾治安,姚树友,郑晓玲, 等. 基于移动互联网技术的继电保护设备智能运维管理模式探讨[J]. 电力系统保护与控制, 2019, 47(16):80-86. ZENG Zhian, YAO Shuyou, ZHENG Xiaoling, et al. Discussion on intelligent operation and maintenance management mode of relay protection equipment based on mobile internet technology[J]. Power System Protection and Control, 2019, 47(16): 80-86.
[8] 陈许议. 电力安全工器具的全寿命管理[J]. 电力安全技术, 2019, 21(9): 12-14. CHEN Xuyi. Life-cycle management of electrical safety tools and apparatus[J]. Electric Safety Technology, 2019, 21(9): 12-14.
[9] 倪蕙. 电力安全工器具创新监管体系研究[J]. 电力安全技术, 2019, 21(10): 32-36. NI Hui. Research on innovation supervision system of electric power safety tools[J]. Electric Safety Technology, 2019, 21(10): 32-36.
[10] 张宏安,袁峻,李霁寅. 变电站安全工器具管理系统实现及运用[J]. 电工技术, 2019(7): 48-50. ZHANG Hongan, YUAN Jun, LI Jiyan. Realization and application of safety apparatus management system in substation[J]. Electric Engineering, 2019(7): 48-50.
[11] 李剑,张劲,王灿,等. 变电设备物联网一体化智能监测装置研究[J]. 高电压技术, 2015, 41(12): 3881-3887. LI Jian, ZHANG Jin, WANG Can, et al. Research on integrated smart monitoring devices for internet of power transformation equipment[J]. High Voltage Engineering, 2015, 41(12): 3881-3887.
[12] 张作刚, 曾敏, 蔡建峰. 基于ISDN和RFID的电力安全工器具管理创新与实践[J]. 电工技术, 2019(24): 21-22. ZHANG Zuogang, ZENG Min, CAI Jianfeng. Innovation and practice of power tools management based on ISDN and RFID[J]. Electric Engineering, 2019(24): 21-22.
[13] 黄忠,葛连升.基于CoAP的物联网Web服务统一访问方法[J]. 山东大学学报(工学版), 2014, 44(4): 16-21. HUANG Zhong, GE Liansheng. A unified access method for Web services in IoT based on CoAP[J]. Journal of Shandong University(Engineering Science), 2014, 44(4): 16-21.
[14] SAAB S S, NAKAD Z S. A standalone RFID indoor positioning system using passive tags[J]. IEEE Transactions on Industrial Electronics, 2011, 58(5): 1961-1970.
[15] 邓芳明, 温开云, 何怡刚, 等. 基于RFID传感标签及QPSO-RVM的变压器绕组故障在线诊断技术[J].中国电机工程学报, 2018, 38(24): 7183-7193. DENG Fangming, WEN Kaiyun, HE Yigang, et al. On-line fault diagnosis for transformer windings based on RFID sensor tags and QPSO-RVM[J]. Proceedings of the CSEE, 2018, 38(24): 7183-7193.
[16] 焦学林,温焜南. GPS和UWB定位在新能源场站安全监管中的应用[J]. 电力安全技术, 2019, 21(8): 36-40. JIAO Xuelin, WEN Kunnan. Application of GPS and UWB based positioning principle in safety supervision of the new energy power station[J]. Electric Safety Technology, 2019, 21(8): 36-40.
[17] 杨亚楠,夏斌,谢楠,等.基于BP神经网络和多元Taylor级数的混合定位算法[J]. 山东大学学报(工学版),2019,49(1):36-40. YANG Ya'nan, XIA Bin, XIE Nan, et al. Hybrid localization algorithm based on BP neural network and multivariable Taylor series[J]. Journal of Shandong University(Engineering Science), 2019, 49(1):36-40.
[18] 杨海,李威,张禾,等.复杂坏境下基于SINS/UWB的容错组合定位技术研究[J]. 仪器仪表学报, 2017, 38(9): 2177-2185. YANG Hai, LI Wei, ZHANG He, et al. Fault tolerant integrated positioning system based on SINS/UWB in complex environment[J]. Chinese Journal of Scientific Instrument, 2017, 38(9): 2177-2185.
[19] YIM D, CHO S H. Indoor positioning and body direction measurement system using IR-UWB radar[C] //19th International Radar Symposium(IRS). Bonn, Germany: IEEE, 2018.
[20] 沈冬冬,周风余,栗梦媛,等.基于集成深度神经网络的室内无线定位[J]. 山东大学学报(工学版),2018,48(5):95-102. SHEN Dongdong, ZHOU Fengyu, LI Mengyuan, et al. An operation and maintenance personnel positioning system of substation based on UWB[J]. Journal of Shandong University(Engineering Science), 2018, 48(5):95-102.
[21] 刘陈,蔡婷.一种基于RSSI向量的传感器网络定位算法[J]. 山东大学学报(工学版), 2016,46(3):23-30. LIU Chen, CAI Ting. A localization algorithm based on RSSI vector for wireless sensor networks[J]. Journal of Shandong University(Engineering Science), 2016, 46(3):23-30.
[22] 李稳, 顾苏, 汪志刚, 等. 基于ToF技术的带电作业安全监测与预警系统[J]. 中国电力, 2020, 53(2): 63-68. LI Wen, GU Su, WANG Zhigang, et al. The safety monitoring and warning system for live working based on ToF technology[J]. Electric Power, 2020, 53(2): 63-68.
[23] 李沐, 冯新岩, 蔄晓琨. 基于TDOA和TS-PSO的变压器特高频局部放电空间定位方法[J]. 中国电机工程学报, 2019, 39(6): 1834-1842. LI Mu, FENG Xinyan, MAN Xiaokun. A transformer partial discharge UHF localization method based on TDOA and TS-PSO[J]. Proceedings of the CSEE, 2019, 39(6): 1834-1842.
No related articles found!
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed   
[1] WANG Su-yu,<\sup>,AI Xing<\sup>,ZHAO Jun<\sup>,LI Zuo-li<\sup>,LIU Zeng-wen<\sup> . Milling force prediction model for highspeed end milling 3Cr2Mo steel[J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2006, 36(1): 1 -5 .
[2] ZHANG Yong-hua,WANG An-ling,LIU Fu-ping . The reflected phase angle of low frequent inhomogeneous[J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2006, 36(2): 22 -25 .
[3] SHI Lai-shun,WAN Zhong-yi . Synthesis and performance evaluation of a novel betaine-type asphalt emulsifier[J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2008, 38(4): 112 -115 .
[4] LI Liang, LUO Qiming, CHEN Enhong. Graph-based ranking model for object-level search
[J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2009, 39(1): 15 -21 .
[5] CHEN Rui, LI Hongwei, TIAN Jing. The relationship between the number of magnetic poles and the bearing capacity of radial magnetic bearing[J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2018, 48(2): 81 -85 .
[6] WANG Bo,WANG Ning-sheng . Automatic generation and combinatory optimization of disassembly sequence for mechanical-electric assembly[J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2006, 36(2): 52 -57 .
[7] LI Ke,LIU Chang-chun,LI Tong-lei . Medical registration approach using improved maximization of mutual information[J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2006, 36(2): 107 -110 .
[8] JI Tao,GAO Xu/sup>,SUN Tong-jing,XUE Yong-duan/sup>,XU Bing-yin/sup> . Characteristic analysis of fault generated traveling waves in 10 Kv automatic blocking and continuous power transmission lines[J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2006, 36(2): 111 -116 .
[9] . [J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2009, 39(1): 27 -32 .
[10] QIN Tong, SUN Fengrong*, WANG Limei, WANG Qinghao, LI Xincai. 3D surface reconstruction using the shape based interpolation guided by maximal discs[J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2010, 40(3): 1 -5 .
Copyright 2018 © Editorial office of Journal of Shandong University (Engineering Science)
Supported by Beijing Magtech Co.Ltd