Journal of Shandong University(Engineering Science) ›› 2020, Vol. 50 ›› Issue (6): 129-134.doi: 10.6040/j.issn.1672-3961.0.2020.295

Previous Articles    

Condensation heat transfer characteristics of steam containing non-condensable gas on sawtooth surface

YAN Jiqing1, WANG Xiaojia2, TIAN Maocheng2   

  1. 1. Shenhua Engineering Technology Co., Ltd., Beijing 100007, China;
    2. School of Energy and Power Engineering, Shandong University, Jinan 250061, Shandong, China
  • Published:2020-12-15

PDF (PC)

213

Abstract: To obtain higher thermal efficiency in the condensation process of steam containing non-condensing gas, a new sawtooth heat transfer strengthening plate was proposed and its two-dimensional model was established. The difference of condensation heat transfer characteristics between serrated plate and corrugated plate with the same specification was analyzed by Fluent software. A condensation heat transfer model to calculate both non-condensable gas layer and liquid film layer at the same time was established and compiled by user defined functions in the numerical simulation. The model reliability was verified by comparing with the experimental values in the same working conditions. The two-phase flow and heat and mass transfer characteristics of different plate surfaces are obtained, and the results showed that compared with the corrugated plate, the sawtooth plate could significantly improve the turbulence of the non-condensable gas layer, which was beneficial to the heat and mass transfer process on the liquid film surface. The liquid film of the sawtooth plate would be periodically fractured at the tooth peak of the wave node and then re-formed on the downstream wall surface and reached the maximum thickness at the trough. Compared with the corrugated plate, the heat transfer capacity of the sawtooth plate was improved by more than 60%.

Key words: sawtooth plate, numerical calculation, condensation heat transfer, non-condensable gas, liquid film

CLC Number: 

  • TK124
[1] MINKOWYCZ W J, SPARROW E M. Condensation heat trans-fer in the presence of noncondensables, interfacial resis-tance, superheating, variable properties, and diffusion[J]. International Journal of Heat and Mass Transfer, 1966, 9(10): 1125-1144.
[2] 杨宇伟.伴随有凝结发生的椭圆管外对流换热特性的数值研究[D].太原:太原理工大学,2016. YANG Yuwei. Numerical simulation on heat performance outside of elliptical tube heat exchanger with steam condensation[D]. Taiyuan: Taiyuan University of Tech-nology, 2016.
[3] ZSCHAECK G, FRANK T, BURNS A D. CFD modelling and vali-dation of wall condensation in the presence of non-conden-sable gases[J]. Nuclear Engineering and Design, 2014, 279: 137-146.
[4] CHANTANA C, KUMAR S. Experimental and theoretical investigation of air-steam condensation in a vertical tube at low inlet steam fractions[J]. Applied Thermal Engin-eering, 2013, 54(2): 399-412.
[5] SIOW E C, ORMISTON S J, SOLIMAM H M. Two-phase modelling of laminar film condensation from vapour-gas mixtures in declining parallel-plate channels[J]. International Journal of Thermal Sciences, 2007, 46(5): 458-466.
[6] ZHANG Lili, ZHANG Guanmin, TIAN Maocheng, et al. Modeling of laminar filmwise condensation of methane with nitrogen on an isothermal vertical plate[J]. International Communications in Heat and Mass Transfer, 2019, 105: 10-18.
[7] WANG Yungang, ZHAO Qinxin, ZHOU Qulan, et al. Experimental and numerical studies on actual flue gas condensation heat transfer in a left-right symmetric internally finned tube[J]. International Journal of Heat and Mass Transfer, 2013, 64: 10-20.
[8] GANGULI A, PATEL A G, MAHESHWARI N K, et al. Theoretical modeling of condensation of steam outside different vertical geometries(tube, flat plates)in the presence of noncondensable gases like air and helium[J]. Nuclear Engineering and Design, 2008, 238(9): 2328-2340.
[9] KEKAULA K, CHEN Y, MA T, et al. Numerical investigation of condensation in inclined tube air-cooled condensers[J]. Applied Thermal Engineering, 2017, 118: 418-429.
[10] HAMMOUDI D, BENABDESSELAM A, AZZI A, et al. Numerical modeling of steam condensation in vertical channel in presence of noncondensable gas[J]. International Journal of Thermal Sciences, 2018, 126: 263-271.
[11] WANG Xianmao, CHANG Huajian, CORRADIMI M. A CFD study of wave influence on film steam condensation in the presence of noncondensable gas[J]. Nuclear Engineering and Design, 2016, 305: 303-313.
[12] HUANG Jian, ZHANG Junxia, WANG Li. Review of vapor condensation heat and mass transfer in the presence of non-condensable gas[J]. Applied Thermal Engineering, 2015, 89: 469-484.
[13] XU Huiqiang, GU Haifeng, SUN Zhongning. Forced convection condensation of steam in the presence of multicomponent noncondensable gases inside a horizontal tube[J]. International Journal of Heat and Mass Transfer, 2017, 104: 1110-1119.
[14] TANG G, HU H, ZHUANG Z, et al. Film condensation heat transfer on a horizontal tube in presence of a noncondensable gas[J]. Applied Thermal Engineering. 2012, 36: 414-425.
[15] 贾文华. 异形管内混合气体流动凝结换热特性数值模拟[D]. 济南:山东大学, 2019. JIA Wenhua. Numerical analysis on the heat transfer and flow characteristics of condensation in special type heat exchange tube about the mixed gas[D]. Jinan: Shandong University, 2019.
[16] OH S, REVANKAR S T. Experimental and theoretical investigation of film condensation with noncondensable gas[J]. International Journal of Heat and Mass Transfer, 2006, 49(15): 2523-2534.
[17] 唐亮亮. 纯蒸汽与含不凝气蒸汽气泡冷凝过程的数值模拟[D]. 济南:山东大学, 2018. TANG Liangliang. Numerical analysis on condensing process of the steam and the air-steam mixture bubble[D]. Jinan: Shandong University, 2018.
[18] PUNETHA M, KHANDEKAR S. A CFD based modelling approach for predicting steam condensation in the presence of non-condensable gases[J]. Nuclear Engineering and Design, 2017, 324: 280-296.
[19] 衣秋杰. 竖壁外含不凝气体蒸汽凝结传热特性研究[D]. 济南:山东大学, 2018. YI Qiujie. Investigation on the mechanism of steam con-densation heat and mass transfer with non-condensable gas on vertical plate[D]. Jinan: Shandong University, 2018.
[20] YI Qiujie, TIAN Maocheng, YAN Weijie, et al. Visualization study of the influence of non-condensable gas on steam con-densation heat transfer[J]. Applied Thermal Engineering, 2016, 106: 13-21.
[21] CHEN Xianbing, TIAN Maocheng, QU Xiaohang, et al. Numerical investigation on the interfacial characteristics of steam jet condensation in subcooled water flow in a restricted channel[J]. International Journal of Heat and Mass Transfer, 2019, 137: 908-921.
[1] MA Zongzheng, SHAO Fengxiang, WANG Xinli, YANG Anjie. Thermoelectric generator system based on engine exhaust gas [J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2016, 46(2): 122-127.
[2] CHENG Shen, SUN Feng-zhong*. Experimental analysis of condensation heat transfer characteristics under vacuum condition of Nickel based implanted tube bundle [J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2014, 44(1): 90-94.
[3] SONG Kai-ming1, YU Jian2, DING Dong-sheng1, CHU Shao-ling3, ZHOU Yu-qiang4. The optimization of rowing bote type based on VOF method [J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2012, 42(4): 67-73.
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed   
No Suggested Reading articles found!
Copyright 2018 © Editorial office of Journal of Shandong University (Engineering Science)
Supported by Beijing Magtech Co.Ltd