JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE) ›› 2017, Vol. 47 ›› Issue (1): 84-89.doi: 10.6040/j.issn.1672-3961.0.2016.140

Previous Articles     Next Articles

Experiment and numerical simulation for surface roughness of 2024 aluminum alloy treated by shot peening


  1. ZHENG Linbin, WANG Jianming*, HE Xunchao(School of Mechanical Engineering, Shandong University, Jinan 250061, Shandong, China
  • Received:2016-04-27 Online:2017-02-20 Published:2016-04-27

Abstract: In order to research the effects of shot peeing on roughness of 2024 aluminum alloy, an effective method with numerical simulation to predict shot peening roughness was put forward. Aluminum alloy specimens were treated by shot peening, and their roughness Ra were measured by experimental measurement. A model with multiple shots was established to simulate the process of shot peening using ABAQUS, and the Ra were obtained from the statistics of nodal displacements along some sample paths based on the proposed discretized formula. Then the effects of shot parameters on roughness were analyzed through changing the parameters of the model. The results showed that relative error between simulation and experiment were 16.7%, 2.5%, 4.3%, which meant that simulation values were agree well with experimental ones. The correctness of simulation model and results was verified. In addition, it could be concluded by simulation that roughness increased as diameter of shots increased, as velocity of shots increased, and roughness increased quickly at beginning, then increased slowly as shot peening coverage increased.

Key words: 2024 aluminum alloy, shot peeing, roughness, experimental measurement, simulation

CLC Number: 

  • TG146.21
[1] 宋仁国. 高强度铝合金的研究现状及发展趋势[J]. 材料导报, 2000, 14(1):20-21. SONG Renguo. Current status and trends in high strength aluminum alloy research[J]. Materials Review, 2000, 14(1):20-21.
[2] 刘兵, 彭超群, 王日初, 等. 大飞机用铝合金的研究现状及展望[J]. 中国有色金属学报, 2010, 20(9):1705-1715. LIU Bing, PENG Chaoqun, WANG Richu, et al. Recent development and prospects for giant plane aluminum alloys[J]. The Chinese Journal of Nonferrous Metals, 2010, 20(9):1705-1714.
[3] 曾元松, 黄遐, 李志强. 先进喷丸成形技术及其应用与发展[J]. 塑性工程学报, 2006, 13(3):23-29. ZENG Yuansong, HUANG Xia, LI Zhiqiang. The application and development of advanced shot peen forming technologies[J]. Journal of Plasticity Engineering, 2006, 13(3):23-29.
[4] RAJESH P, JIXI Z, MCDOWELL D L, et al. 3D modeling of subsurface fatigue crack nucleation potency of primary inclusions in heat treated and shot peened martensitic gear steels[J]. International Journal of Fatigue, 2009, 31(7):1176-1189.
[5] HONG T, OOI J Y, SHAW B. A numerical simulation to relate the shot peening parameters to the induced residual stresses[J]. Engineering Failure Analysis, 2008, 15(8):1097-1110.
[6] DALAEI K, KARLSSON B, SVENSSON L E. Stability of shot peening induced residual stresses and their influence on fatigue lifetime[J]. Materials Science and Engineering: A, 2011, 528(3):1008-1015.
[7] 赵远兴, 刘道新, 关艳英, 等. 陶瓷丸喷丸对2024HDT铝合金疲劳性能的影响[J]. 兵器材料科学与工程, 2014, 37(4):15-20. ZHAO Yuanxing, LIU Daoxin, GUAN Yanying, et al. Influence of ceramic peening on fatigue properties of 2024HDT aluminum alloy[J]. Ordnance Material Science and Engineering, 2014, 37(4):15-20.
[8] 田唐永. TC4 钛合金喷丸强化组织与性能研究[D]. 大连: 大连理工大学, 2012. TIAN Tangyong. Microstructures and properties of TC4 titanium alloy treated by shot peening[D]. Dalian: Dalian University of Technology, 2012.
[9] MYLONAS G I, LABEAS G. Numerical modelling of shot peening process and corresponding products: residual stress, surface roughness and cold work prediction[J]. Surface and Coatings Technology, 2011, 205(19):4480-4494.
[10] SHENGPING W, YONGJUN L, MEI Y, et al. Compressive residual stress introduced by shot peening[J]. Journal of Materials Processing Technology, 1998, 73(1):64-73.
[11] TAEHYUNG K, JIN H L, HYUNGYIL L, et al. An area-average approach to peening residual stress under multi-impacts using a three-dimensional symmetry-cell finite element model with plastic shots[J]. Materials & Design, 2010, 31(1):50-59.
[12] LAMMI C J, LADOS D A. Numerical predictions and experimental measurements of residual stresses in fatigue crack growth specimens[J]. Engineering Fracture Mechanics, 2011, 78(6):1114-1124.
[13] 李源, 雷丽萍, 曾攀. 弹丸束喷丸有限元模型数值模拟及试验研究[J]. 机械工程学报, 2011, 47(22):43-48. LI Yuan, LEI Liping, ZENG Pan. Shot stream finite element model for shot peening numerical simulation and its experiment study[J]. Journal of Mechanical Engineering, 2011, 47(22):43-48.
[14] LEI Z, HONG Y, XU L. Effect of residual stress on creep crack growth behavior in ASME P92 steel[J]. Engineering Fracture Mechanics, 2013, 110(1):233-248.
[15] GOZIN M H, AGHAIE-KHAFRI M. 2D and 3D finite element analysis of crack growth under compressive residual stress field[J]. International Journal of Solids and Structures, 2012, 49(23):3316-3322.
[16] 王强, 张志刚, 高玉魁, 等. 喷丸材料及粒径对 300M 钢原始表面粗糙度的影响[J]. 材料保护, 2011, 44(7):35-37. WANG Qiang, ZHANG Zhigang, GAO Yukui, et al. Effect of shot peening material and grit size on the surface roughness of 300M steel[J]. Materials Protection, 2011, 44(7):35-37.
[17] LLANEZ V, BELZUNCE F J. Study of the effects produced by shot peening on the surface of quenched and tempered steels: roughness, residual stresses and work hardening[J]. Applied Surface Science, 2015, 356:475-485.
[18] 周松, 谢里阳, 回丽, 等. 喷丸强化对2XXX铝合金疲劳寿命的影响[J]. 材料工程, 2014, 12(1):86-91. ZHOU Song, XIE Liyang, HUI Li, et al. Influence of shot peening on fatigue life of 2XXX aluminum alloy[J]. Journal of Material Engineering, 2014, 12(1):86-91.
[19] 强斌, 李亚东, 顾颖, 等. 钢板喷丸处理残余应力场和表面粗糙度数值模拟[J]. 西南交通大学学报, 2015, 50(4):691-697. QIANG Bin, LI Yadong, GU Ying, et al. Numerical simulation of residual stress field and surface roughness for steel plate subjected to shot peening[J]. Journal of Southwest Jiaotong Universty, 2015, 50(4):691-697.
[20] 李娜, 李玉龙, 郭伟国. 3 种铝合金材料动态性能及其温度相关性对比研究[J]. 航空学报, 2008, 29(4):903-908. LI Na, LI Yulong, GUO Weiguo. Comparison of mechanical properties and their temperature dependencies for three aluminium alloys under dynamic load[J]. Acta Aeronautica et Astronautica Sinica, 2008, 29(4):903-908.
[1] SONG Shizhan, WANG Chuanyong, KANG Wenwen, ZHANG Jian, YAN Honghua, LI Peng. PV installed capacity planning for power distribution network based on time series production simulation [J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2018, 48(5): 131-136.
[2] WANG Zhongxiao, CUI Xinzhuang, CUI Sheqiang, ZHANG Lei, CHE Huaqiao, SU Junwei. The influence of soil-cement pile deterioration and modification in salt-water area on road composite foundation [J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2018, 48(4): 69-77.
[3] HE Zhengyi, ZENG Xianhua, GUO Jiang. An ensemble method with convolutional neural network and deep belief network for gait recognition and simulation [J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2018, 48(3): 88-95.
[4] DAI Shiyu, LIU Shuqin. Estimation of speed and acceleration of the Maglev platform by state observer [J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2018, 48(2): 114-120.
[5] SONG Guijie. Deformation characteristic and instability analysis for shallow soft rock section during tunnel-entering construction [J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2018, 48(2): 53-60.
[6] WANG Danhua, ZHANG Guanmin, LENG Xueli, XU Mengna, HAN Yuanyuan. The numerical simulation of two-phase flow distribution characteristics in T-tube [J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2018, 48(1): 89-95.
[7] ZHANG Bohan, CHEN Zheming, FU Jianghua, CHEN Bao. Self-adaption acceleration slip regulation control of four-wheel independently-driving electric vehicle [J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2018, 48(1): 96-103.
[8] SHAO Jian, WEI Peiyu, CHEN Ping, LIANG Fengqiang, MENG Chao. A traveling wave fault location method for T-type transmission line based on combined traveling wave principle [J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2018, 48(1): 117-123.
[9] ZHANG Shuangsheng, QIANG Jing, LIU Xikun, LIU Hanhu, ZHU Xueqiang. Inverse problems of pollution source identification based on Bayesian-DE [J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2018, 48(1): 131-136.
[11] XIA Mengran, LI Wei, FENG Xiao, ZHU Guangxuan, LI Xia. Grouting reinforcement and excavation stability on super-shallow buried and water-rich sand stratum subway transverse channel [J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2017, 47(2): 47-54.
[12] CUI Qing, ZHANG Changqiao, XIU Jianxin, XU Shiming, LU Lili. Molecular dynamic simulation on the mechanism of viscosity reduction to asphaltene and resin in heavy oil [J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2017, 47(2): 123-130.
[13] LYU Guoren, ZHANG Qun, NIU Ben, GAO Quanting, WU Zhaoshou. The effects of pile foundation of high-rise building on adjacent structures [J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2017, 47(1): 48-58.
[14] CHEN Yucheng, SUN Qiang, MIAO Qiang, BAI Shuzhan, LI Guoxiang. Design and development of test bench for hybrid electric vehicle powertrain [J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2017, 47(1): 119-124.
[15] PENG Yuancheng, DONG Xu, LIANG Na, DENG Zhenquan. Model test of the Beipan River's new open-web continuous rigid frame bridge corner node [J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2016, 46(6): 113-119.
Full text



No Suggested Reading articles found!