JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE) ›› 2010, Vol. 40 ›› Issue (3): 124-127.

• Articles • Previous Articles     Next Articles

Experiments and calculating method for cracking strength and crack width of the metro segment

ZHOU Hai-ying1, LI Li-xin2, CHEN Ting-guo1   

  1. 1. Faculty of Infrastructure Engineering, Dalian University of Technology, Dalian 116023, China;
    2. School of Civil Engineering, Shenyang Jianzhu University, Shenyang 110168, China
  • Received:2009-11-17 Online:2010-06-16 Published:2009-11-17

Abstract:

To investigate the cracking behavior of the reinforced concrete (RC) lining segment, a test of two RC lining segments of fullscale with different reinforcement ratios was carried out. Through the analysis, it was found that  increasing the  reinforcement ratio has little effect on cracking strength of the RC lining segment, the average crack spacing and the maximum crack width of RC lining segment decreases at a small rate with the increasing of the reinforcement ratio. The effect of different reinforcement ratios on cracking strength and crack  width of the RC lining segment was analyzed based on the test results. Formulas for cracking strength considering height and maximum crack width as well as  reinforcement ratio are proposed, and the results calculated by formulas show good agreement with those of experiments.
 

Key words: lining segment, cracking strength, crack width

[1] ZHOU Hai-ying1, LI Li-xin2, CHEN Ting-guo1. Experiments and calculation method for bearing capacity of the lining segment of metro shield tunneling [J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2010, 40(4): 84-87.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
No Suggested Reading articles found!