Journal of Shandong University(Engineering Science) ›› 2024, Vol. 54 ›› Issue (6): 182-190.doi: 10.6040/j.issn.1672-3961.0.2023.215
• Mechanical Engineering • Previous Articles
LIU Di1, JI Jianyi2, SUN Jianying3, JIANG Jingliang1,2*, GAO Yufei4
CLC Number:
[1] 杨明政, 陈长征, 金毓林, 等. 直联电驱动桥壳模态灵敏度分析及优化设计[J]. 机械设计与制造, 2023(12): 297-300. YANG Mingzheng, CHEN Changzheng, JIN Yulin, et al. Modal sensitivity analysis and optimization design of direct-connected electric drive axle housing[J]. Machinery Design & Manufacture, 2023(12): 297-300. [2] 张利鹏, 祁炳楠. 对称式行星齿轮差速器的转矩转速分配特性研究[J]. 机械设计与制造, 2012(9): 138-140. ZHANG Lipeng, QI Bingnan. Torque and speed distribution characteristic of symmetrical planetary gear differential[J]. Machinery Design & Manufacture, 2012(9): 138-140. [3] 尹明睿, 李学伟, 井宸, 等. 驱动桥传动系典型工况下的一体化动力学仿真[J]. 机械传动, 2019, 43(4): 133-138. YIN Mingrui, LI Xuewei, JING Chen, et al. United dynamics simulation of driving axle under typical working condition[J]. Journal of Mechanical Transmission, 2019, 43(4): 133-138. [4] 林超, 冉贵, 徐萍. 端曲面齿轮防滑差速器运动特性分析与仿真[J]. 机械传动, 2023, 47(1): 88-95. LIN Chao, RAN Gui, XU Ping. Motion characteristics analysis and simulation of limited slip differential with curve-faced gear pair[J]. Journal of Mechanical Transmission, 2023, 47(1): 88-95. [5] FATHI Djemal, WASSIM Lafi, DHOUHA Tounsi, et al. Effects of mass imbalance and eccentricity defects on the automotive differential dynamics[J]. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 2021, 43(9): 1-27. [6] WASSIM Lafi, FATHI Djemal, DHOUHA Tounsi, et al. Dynamic modelling of differential bevel gear system in the presence of a defect[J]. Mechanism and Machine Theory, 2019(139): 81-108. [7] YASSINE Driss, AHMED Hammami, LASSAADWalha, et al. Effects of gear mesh fluctuation and defaults on the dynamic behavior of two-stage straight bevel system[J]. Mechanism and Machine Theory, 2014(82): 71-86. [8] 王军年, 倪健土, 杨斌, 等. 电动汽车转矩定向分配差速器建模与动态仿真[J]. 汽车工程, 2020, 42(4): 491-497. WANG Junnian, NI Jiantu, YANG Bin, et al. Modelling and dynamic simulation of torque vectoring differential for EV[J]. Automotive Engineering, 2020, 42(4): 491-497. [9] SMETANA Tomas, BIERMANN Thorsten, ROHE Marco, et al. E-drive with electrically controlled differential[J]. ATZelektronik Worldwide, 2011, 6(5): 4-9. [10] PROVATIDIS Christopher, KALLIGEROS Christos, SPITAS Vasilios. Design considerations and simulation of a rolling-contact gearless automotive differential[J]. Proceedings of the Institution of Mechanical Engineers: Part C: Journal of Mechanical Engineering Science, 2023, 237(20): 4895-4910. [11] 华星淇, 何锋. 基于二阶滑模算法的双电机后驱车辆差速系统设计[J]. 机械设计与制造, 2021(9): 115-119. HUA Xingqi, HE Feng. Design of dual motor rear drive vehicle differential system based on second order sliding model algorithm[J]. Machinery Design & Manufacture, 2021(9): 115-119. [12] 魏聪, 王优强, 周亚博, 等. 汽车差速器锥齿轮差速工况下的热弹流润滑分析[J]. 机械传动, 2019, 43(5): 110-115. WEI Cong, WANG Youqiang, ZHOU Yabo, et al. Thermal elastohydrodynamic lubrication analysis of automotive differential bevel gear under differential condition[J]. Journal of Mechanical Transmission, 2019, 43(5): 110-115. [13] 魏聪, 王优强, 周亚博, 等. 汽车差速器锥齿轮差速工况下的润滑特性研究 [J]. 润滑与密封, 2019, 44(8): 74-80. WEI Cong, WANG Youqiang, ZHOU Yabo, et al. Research on lubrication characteristics of differential gear bevel gears under differential operating conditions [J]. Lubrication Engineering, 2019, 44(8): 74-80. [14] 黄丰云, 刘伟腾, 邹琳, 等. 汽车后桥准双曲面齿轮搅油损失数值模拟及其减阻研究[J]. 机械设计与制造, 2021(8): 265-269. HUANG Fengyun, LIU Weiteng, ZOU Lin, et al. Numerical simulation of the churning losses in the automobile rear axle hypoid gear and the investigation on drag reduction[J]. Machinery Design & Manufacture, 2021(8): 265-269. [15] FATHI Djemal, WASSIM Lafi, DHOUHA Tounsi, et al. Effects of mass imbalance and eccentricity defects on the automotive differential dynamics[J]. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 2021, 43(9): 1-27. [16] 贾巨民, 高波, 赵德龙. 基于保测地曲率映射的非圆锥齿轮传动设计分析方法[J]. 机械工程学报, 2008(4): 53-57. JIA Jumin, GAO Bo, ZHAO Delong. Analysis method for noncircular bevel gearing based on geodesic curvature preserving mapping[J]. Journal of Mechanical Engineering, 2008(4): 53-57. [17] 贾巨民, 高波, 索文莉, 等. 越野汽车新型变速比差速器的研究[J]. 中国机械工程, 2012, 23(23): 2844-2847. JIA Jumin, GAO Bo, SUO Wenli, et al. Study on a new type of differential with variable ratio for off-road vehicles[J]. China Mechanical Engineering, 2012, 23(23): 2844-2847. [18] 贾巨民, 高波. 越野汽车双联非圆行星齿轮差速器的研究[J]. 中国机械工程, 2012, 23(3): 346-348. JIA Jumin, GAO Bo. A novel noncircular planetary differential for off-road vehicles[J]. China Mechanical Engineering, 2012, 23(3): 346-348. [19] 贾巨民, 高波. 越野汽车分动器非圆行星差速器概念模型[J]. 中国机械工程, 2008, 19(24): 3003-3005. JIA Jumin, GAO Bo. A conceptive noncircular planetary differential for off-road vehicles[J]. China Mechanical Engineering, 2008, 19(24): 3003-3005. [20] Symbol`@@ 陈家瑞. 汽车构造[M]. 2版. 北京: 机械工业出版社, 2005: 244-247. CHEN Jiarui. Automobile construction[M]. 2nd ed. Beijing: China Machine Press, 2005: 244-247. |
[1] | Tianyu HAN,Changhou LU,Jianmei LI,Ang YIN,Qiulin HOU. A machine vision system for measuring screw pitch with image processing techniques [J]. Journal of Shandong University(Engineering Science), 2022, 52(3): 80-85. |
[2] | Yingxin LIU,Jian QIN,Yanjun LIU. The analysis of key parameters of hydraulic energy storage system of wave energy converter [J]. Journal of Shandong University(Engineering Science), 2021, 51(6): 1-8. |
[3] | Yanjun LIU,Shuang WU,Dengshuai WANG,Ruohong WANG. Research progress of ocean wave energy converters [J]. Journal of Shandong University(Engineering Science), 2021, 51(5): 63-75. |
[4] | Yanjun LIU, Wei WANG, Zhi CHEN, Donghai WANG, Dengshuai WANG, Gang XUE. The influence of shape parameters of wave energy device floating body on energy capture characteristics [J]. Journal of Shandong University(Engineering Science), 2020, 50(6): 1-8. |
[5] | Xiaoguang WANG,Zhuang HE,Xianfu LI,Ao PAN. Influence of magnetic suspension rotor driving magnetic field on supporting magnetic field [J]. Journal of Shandong University(Engineering Science), 2019, 49(4): 86-92. |
[6] | CHENG Xin, ZHANG Lin, HU Yefa, CHEN Qiang, LIANG Dian. Fault diagnosis of electromagnetic coil in active magnetic bearing based on current characteristics [J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2018, 48(4): 94-101. |
[7] | LIU Yihui, LI Lin, LIU Kai, SUN Jie. Investigation on temperature characteristic and relaxation mechanism for high-speed train axle-bearing system [J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2016, 46(2): 116-121. |
[8] | HAO Qian-hua1, HE Qing-hua1,2*, ZHU Jun-lin1, LI Sai-bai1, CHEN Zheng1, SHU Min-fei1. Experimental research of energy consumption of an electric forklift hydraulic lifting system with pressure accumulators [J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2011, 41(6): 80-84. |
[9] | WANG Yong, XIE Yudong. Gas control technology of largeflow pipe [J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2009, 39(2): 70-74. |
[10] | ZHANG Jing-zheng,WANG Yong,XUE Yun-na . The fluctuation and impact effect of the engine time chain [J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2007, 37(2): 30-33 . |
[11] | HAN Jiazhen, WANG Yong, XIE Yudong, WANG Qixian, ZHANG Xinbiao, GAO Wenbin, LI Ronglan, ZHANG Chuanjun. Mechanical characteristics for deep sea wet-mate electrical connectors [J]. Journal of Shandong University(Engineering Science), 2020, 50(6): 30-39. |
[12] | LI Peng, LIU Zhaoqiang, YANG Fengling, LIU Xin. Operating characteristics of oil-free twin-screw air compressor [J]. Journal of Shandong University(Engineering Science), 2021, 51(4): 84-90. |
|