基于CFD的铣槽机泥浆运移规律数值模拟及施工优化

doi:10.6040/j.issn.1672-3961.0.2022.144

Abstract

CLC Number:

TU94

LIU Xiangkun, LI Shuchen, WANG Xiuwei, TIAN Ye, XU Jingwei, WEI Qingwu, ZHAO Yongxi. CFD-based numerical simulation of slurry migration of trench cutter and construction optimization[J].Journal of Shandong University(Engineering Science), 2023, 53(3): 69-77.

References 11

[1]	詹涛,杨春勃,安斌. 在泥质粉砂岩地层中采用双轮铣快速成槽施工技术[J]. 隧道建设, 2018,38(12): 2019-2025. ZHAN Tao, YANG Chunbo, AN Bin. Rapid grooving technology of double-wheel trench cutter used in argillaceous siltstone stratum[J]. Tunnel Construction, 2018, 38(12): 2019-2025.
[2]	路乾,胡长明,王晓华,等. 地下连续墙成槽施工槽壁整体稳定性分析[J]. 地下空间与工程学报, 2021,17(3): 864-871. LU Qian, HU Changming, WANG Xiaohua, et al. Analysis on the overall stability of trenching construction of diaphragm wall[J]. Chinese Journal of Underground Space and Engineering, 2021, 17(3): 864-871.
[3]	资晓鱼,申玉生,连正,等. 超深地下连续墙槽壁位移及泥浆配制技术研究[J]. 路基工程, 2021(2): 140-147. ZI Xiaoyu, SHEN Yusheng, LIAN Zheng, et al. Study on displacement of trench wall of ultra-deep diaphragm wall and slurry configuration technology[J]. Subgrade Engineering, 2021(2): 140-147.
[4]	熊庭,张梦达,危卫,等. 泥浆管道输送特性的CFD模拟[J]. 人民黄河, 2018,40(4): 19-23. XIONG Ting, ZHANG Mengda, WEI Wei, et al. CFD simulation of characteristics of pipeline slurry transportation[J]. Yellow River, 2018, 40(4): 19-23.
[5]	李万莉,游正民. 双轮铣槽机泥浆管内部固液两相流动的仿真分析[J]. 中国工程机械学报, 2015,13(5): 400-405. LI Wanli, YOU Zhengmin. Simulation analysis on solid-liquid two-phase flow in slurry pipe for trench cutters[J]. Chinese Journal of Construction Machinery, 2015, 13(5): 400-405.
[6]	王继红,张腾飞,王树刚,等. 水平管道内固液两相流流动特性的CFD模拟[J]. 化工学报, 2011,62(12): 3399-3404. WANG Jihong, ZHANG Tengfei, WANG Shugang, et al. Numerical simulation of liquid-solid slurry flow in horizon pipeline[J]. CIESC Journal, 2011, 62(12): 3399-3404.
[7]	陈延伟,王志强,王影杰,等. 泥水系统中泥浆管内固液两相流动的数值模拟分析[J]. 机械研究与应用, 2018,31(1): 42-46. CHEN Yanwei, WANG Zhiqiang, WANG Yingjie, et al. Numerical simulation analysis of solid-liquid two-phase flow in slurry pipe[J]. Mechanical Research & Application, 2018, 31(1): 42-46.
[8]	ZENG Dezhi, ZHANG Enbo, DING Yanyan, et al. Investigation of erosion behaviors of sulfur-particle-laden gas flow in an elbow via a CFD-DEM coupling method[J]. Powder Technology, 2018, 329: 115-128.
[9]	何川. CFD基础及应用[M].重庆:重庆大学出版社, 2015.
[10]	吴迪,蔡嗣经,杨威,等. 基于CFD的充填管道固液两相流输送模拟及试验[J]. 中国有色金属学报, 2012,22(7): 2133-2140. WU Di, CAI Sijing, YANG Wei, et al. Simulation and experiment of backfilling pipeline transportation of solid-liquid two-phase flow based on CFD[J]. The Chinese Journal of Nonferrous Metals, 2012, 22(7): 2133-2140.
[11]	傅旭东,王光谦. 低浓度固液两相流颗粒相本构关系的动理学分析[J]. 清华大学学报(自然科学版), 2002,62(4): 560-563. FU Xudong, WANG Guangqian. Kinetic analysis of the constitutive relationships for the particle phase in dilute solid/liquid two-phase flows[J]. Journal of Tsinghua University(Science and Technology), 2002, 62(4): 560-563.

Metrics

Viewed

Full text

Abstract

Cited

Shared

Discussed

Comments

Recommended 10

[1]	WANG Su-yu,<\sup>,AI Xing<\sup>,ZHAO Jun<\sup>,LI Zuo-li<\sup>,LIU Zeng-wen<\sup> . Milling force prediction model for highspeed end milling 3Cr2Mo steel[J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2006, 36(1): 1 -5 .
[2]	ZHANG Yong-hua,WANG An-ling,LIU Fu-ping . The reflected phase angle of low frequent inhomogeneous[J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2006, 36(2): 22 -25 .
[3]	LI Kan . Empolder and implement of the embedded weld control system[J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2008, 38(4): 37 -41 .
[4]	SHI Lai-shun,WAN Zhong-yi . Synthesis and performance evaluation of a novel betaine-type asphalt emulsifier[J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2008, 38(4): 112 -115 .
[5]	KONG Xiang-zhen,LIU Yan-jun,WANG Yong,ZHAO Xiu-hua . Compensation and simulation for the deadband of the pneumatic proportional valve[J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2006, 36(1): 99 -102 .
[6]	LAI Xiang . The global domain of attraction for a kind of MKdV equations[J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2006, 36(1): 87 -92 .
[7]	YU Jia yuan¹, TIAN Jin ting¹, ZHU Qiang zhong². Computational intelligence and its application in psychology[J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2009, 39(1): 1 -5 .
[8]	LI Liang, LUO Qiming, CHEN Enhong. Graph-based ranking model for object-level search [J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2009, 39(1): 15 -21 .
[9]	CHEN Rui, LI Hongwei, TIAN Jing. The relationship between the number of magnetic poles and the bearing capacity of radial magnetic bearing[J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2018, 48(2): 81 -85 .
[10]	WANG Bo,WANG Ning-sheng . Automatic generation and combinatory optimization of disassembly sequence for mechanical-electric assembly[J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2006, 36(2): 52 -57 .

CFD-based numerical simulation of slurry migration of trench cutter and construction optimization

PDF (PC)

Abstract

Cite this article

share this article

References 11

Related Articles 4

Metrics

Comments

Recommended 10

[1]	LIU Jifeng, YANG Huanhuan. Risk control of extremely close twin shield tunnels nearby passing intensive buildings based on informative construction [J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2017, 47(3): 102-111.
[2]	WU Nong, ZHANG Xiao, LI Mengtian. Research on new grouting equipment and method for the treatment of gushing water in porosity sandstone [J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2015, 45(4): 64-68.
[3]	DIAO Yong, TIAN Si-Meng, CAO Zhe-Meng. Geological work method for the construction of the Yichang Wanzhou Railway tunnel in high risk karst areas [J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2009, 39(5): 91-95.
[4]	GENG Qi, ZHANG Junjie, WANG Ke, LU Yufeng, XIE Liyang, YE Min. Simulation and experimental study on cutting process of tunnel boring machine(TBM)cutters based on FEM-SPH coupled method [J]. Journal of Shandong University(Engineering Science), 2022, 52(1): 93-102.