JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE) ›› 2015, Vol. 45 ›› Issue (1): 45-53.doi: 10.6040/j.issn.1672-3961.0.2014.123

Previous Articles     Next Articles

Live-working robot for emergency repair of power distribution system

GAO Huanbing, TIAN Guohui   

  1. School of Control Science and Engineering, Shandong University, Jinan 250061, Shandong, China
  • Received:2014-09-02 Revised:2014-10-15 Published:2014-09-02

PDF (PC)

1943

Abstract: A live-working robot was presented for the development of safe equipment for emergency rescue and recovery, and its mechanical architecture and control system were discussed. A system solution was proposed based on a hydraulic servo driving robot arm with 6 degrees of freedom, the structure and dynamics performance of which was optimized to maximize its payload capability by kinematics, dynamics and finite element analysis. The compliant control model of the robot arm was built by asymmetric control method against the vibration caused by the collision of the robot with wires. The dynamic positioning system with high precision under complex environment, a combination of static measurement by whole monocular vision and dynamic measurement by binocular eye-in-hand vision system, was developed, then the local automatic path planning and motion control for the robot arm was realized. The effectiveness and feasibility on distribution systems with at the voltage smaller than 10 kV were tested by experiments for the proposed robot.

Key words: robot, distribution system, binocular vision, live-working, object-oriented, hydraulic robot arm

CLC Number: 

  • TP24
[1] Sawada J, Kusumoto K, Maikawa Y, et al. A Mobile Robot for Inspection of Power Transmission Lines[J]. IEEE Trans on Power Delivery, 1991, 6(1):309-315.
[2] Yano K, Maruyama Y, Morita K, et al. Development of the Semi-automatic Hot-line Work Robot Systems "Phase Ⅱ"[C]//Proceedings of the 7th International Conference on Transmission and Distribution Construction and Live Line Maintenance. Washington: IEEE Press, 1995:212-218.
[3] Shinya Tanaka, Yoshinqga Maruyama, Kyoji Yano. Work Automation with the Hot-Line Work Robot System "Phase Ⅱ"[C]//The 1996 IEEE International Conference on Robotics and Automation. Washington: IEEE Press, 1996:1261-1267.
[4] Takaoka K, Yokoyama K, Wakisako H. Development of the fully-automatic live-line maintenance robot-phase III[C]//Proceedings of the 4th IEEE International Symposium on Assembly and Task Planning. Washington: IEEE Press, 2001: 423-428.
[5] Yoshinaga Maruyaga, Robotic application for hot-line maintenance[J].Industrial Robot, 2000, 27(5):357-365.
[6] Tsukahara K, Tanaka Y, Yingxin H, et al. An experimental robot system for power distribution line maintenance robots-system architecture and bolt insertion experiment[C]//Proceedings of the International Conference on Intelligent Robots and Systems. Washington: IEEE Press, 2008:1730-1736.
[7] Santamaria A, Aracil R, Tuduri A, et al. Teleoperated Robots for Live Power Lines Maintenance[C]//Proceedings of the 14th International Conference and Exhibition on Electricity Distribution. Washington: IEEE Press, 1997:3.31.1-3.31.5.
[8] Udod E, Molchanov V, Taloverya V, et al. Automated Apparatus for Live Work on Overhead Transmission Lines[C]//Proceedings of 1998 International Conference on Transmission and Distribution Construction and Live Line Maintenance. Washington: IEEE Press, 1998:19-26.
[9] Zarei-nia K, Sepehri N, Olson T, et al. Haptic-enabled control of hydraulic manipulators applied to power line maintenance: Concept & implementation[C]//Proceedings of the 1st International Conference on Applied Robotics for the Power Industry. Washington: IEEE Press, 2010:1-6.
[10] 赵明辉,朱建生. 加拿大带电作业介绍[J]. 四川电力技术, 1998,21(6):58-60. ZHAO Minghui, ZHU Jiansheng. Live Line Work in Canada[J]. Sichuan Electric Power Technology, 1998, 21(6):58-60.
[11] Soler R, Guillet J. Robotic maintenance of the EDF transmission (63 to 400 kV) network: feasibility study and effects on tower design[C]//Proceedings of the 6th International Conference on Transmission &Distribution Construction & Live Line Maintenance. Washington: IEEE Press, 1993: 459-468.
[12] Chang-HoiKim, Seungho Jung, Taewon Jeong. Relative Position Measurement Method for a Live-line Work Robot[C]//Proceedings of 2007 International Conference on Control, Automation and Systems. Washington: IEEE Press, 2007: 998-1001.
[13] Joon-Young Park, Byung-Hak Cho, Seung-Hyun Byun, et al. Development of Cleaning Robot System for Live-line Suspension Insulator String[J].International Jonrnal of Control,Automation, and Systems. 2009,2(7):211-220.
[14] Joon-Young Park, Byung-Hak Cho, Jae-Kyung Lee. Development of robot mechanism for inspection of live-line suspension insulator string in 345 kV power lines[C]//Proceedings of the 2008 International Conference on Control, Automation and Systems. Washington: IEEE Press, 2008:2062-2065.
[15] 鲁守银, 马培荪, 戚晖, 等. 高压带电作业机器人的研制[J]. 电力系统自动化, 2003, 27(17):56-58. LU Shouyin, MA Peisun, QI Hui, et al. Research on High Voltage Electric Power Live Line Working Robot[J]. Automation of Electric Power Systems, 2003, 27(17):56-58.
[16] 王公旺. 高压带电作业机器人运动控制系统的研究与实现[D]. 青岛:山东科技大学, 2010. WANG Gongwang. The Motion Control System Research and Implementation of High Voltage Live Line Working Robot[D]. Qingdao: Shandong University of Science and Technology, 2010.
[17] Ju Dai, Xuecheng Su. Simulated robotic hot-line maintenance based on virtual reality[C]//Proceedings of the 4th World Congress on Intelligent Control and Automation. Washington: IEEE Press, 2002:1231-1235.
[18] 李健,鲁守银, 李运厂, 等. 10 kV配电线路带电抢修作业机器人实用化研究[J]. 制造业自动化, 2012,34(22):90-94. LI Jian, LU Shouyin, LI Yunchang, et al. The practical research of robot on live repair working for 10 kV distribution lines[J]. Manufacturing Automation, 2012, 34(22):90-94.
[19] Lee Woo-Song, Eom Jae-Hong, Won Jong-Dae, et al. A study on visual servoing control of industrial robot[C]//Proceedings of the 12th International Conference on Control, Automation and Systems. Washington: IEEE Press, 2012:1886-1890.
[20] Huang Guo-Shing, Chen Xi-Sheng, Chang Chung-Liang. Development of dual robotic arm system based on binocular vision[C]//Proceedings of 2013 CACS International Automatic Control Conference. Washington: IEEE Press, 2013:97-102.
[1] JIANG Fengyang, CHENG Yao, HAN Zhe, WANG Huaizhen, ZHOU Fengyu, DONG Lei. The multi-sensor fusion mapping and relocalization based on LVI-SAM-Stereo in indoor and outdoor scenes [J]. Journal of Shandong University(Engineering Science), 2025, 55(4): 72-83.
[2] LÜ Bin, LIU Miao, WU Jianqing, ZHANG Ziyi, CHEN Qixiang. Review on digital map stitching technology [J]. Journal of Shandong University(Engineering Science), 2025, 55(3): 1-15.
[3] LIANG Qixing, LI Bin, LI Zhi, ZHANG Hui, RONG Xuewen, FAN Yong. Algorithm of adaptive slope adjustment of quadruped robot based on model predictive control and its application [J]. Journal of Shandong University(Engineering Science), 2021, 51(3): 37-44.
[4] Wei WANG,Feng WU,Fengyu ZHOU. Research status and development trend of autonomous cognition and learning of robot manipulation skills [J]. Journal of Shandong University(Engineering Science), 2019, 49(6): 11-24.
[5] Meizhen LIU,Fengyu ZHOU,Ming LI,Yugang WANG,Ke CHEN. The composite control of backstepping control based on uncertain model compensation of wheeled mobile robot [J]. Journal of Shandong University(Engineering Science), 2019, 49(6): 36-44.
[6] Linglong KONG,Guohui TIAN. A robot service recognition mechanism based on ontology in smart home [J]. Journal of Shandong University(Engineering Science), 2019, 49(6): 45-54.
[7] Lei YIN, Fengyu ZHOU, Ming LI, Yugang WANG, Yinbo GUO, Ke CHEN. Design of robot cloud service platform based on microservice [J]. Journal of Shandong University(Engineering Science), 2019, 49(6): 55-62.
[8] Caihong LI,Chun FANG,Zhiqiang WANG,Bin XIA,Fengying WANG. Complete coverage path planning for mobile robots based on hyperchaotic synchronization control [J]. Journal of Shandong University(Engineering Science), 2019, 49(6): 63-72.
[9] Honghua ZHAO,Jian ZHAO,Xingguang DUAN,Zhitong HU,Qianqian TIAN,Yaohua ZHAO. Configuration design and interference analysis of multi-arm robot for mandible reconstruction [J]. Journal of Shandong University(Engineering Science), 2019, 49(6): 73-80.
[10] Yujun WU,Wei WU,Yu GUO,Jian GUO. A force-based method for robot hole-searching and assembly [J]. Journal of Shandong University(Engineering Science), 2019, 49(5): 119-126.
[11] Qijie ZOU,Haoyu LI,Rubo ZHANG,Tengda PEI,Yan LIU. Survey of human-robot interaction control for autonomous driving [J]. Journal of Shandong University(Engineering Science), 2019, 49(2): 23-33.
[12] Mian ZHANG,Ying HUANG,Haiyi MEI,Yu GUO. Intelligent interaction method for power distribution robot based on Kinect [J]. Journal of Shandong University(Engineering Science), 2018, 48(5): 103-108.
[13] XIN Yaxian, LI Yibin, LI Bin, RONG Xuewen. Smooth walk-to-trot gait transition algorithm for quadruped robot [J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2018, 48(4): 42-49.
[14] PAN Yiwei, YUAN Shuai, CHEN Alian, ZHANG Chenghui. A soft starting method for the isolated DC/DC converter in DC distribution systems [J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2017, 47(4): 37-42.
[15] ZHAO Zijian, WANG Fang, CHANG Faliang. Survey on medical robot in computer-aided surgery [J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2017, 47(3): 69-78.
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed   
[1] WANG Su-yu,<\sup>,AI Xing<\sup>,ZHAO Jun<\sup>,LI Zuo-li<\sup>,LIU Zeng-wen<\sup> . Milling force prediction model for highspeed end milling 3Cr2Mo steel[J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2006, 36(1): 1 -5 .
[2] ZHANG Yong-hua,WANG An-ling,LIU Fu-ping . The reflected phase angle of low frequent inhomogeneous[J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2006, 36(2): 22 -25 .
[3] LI Kan . Empolder and implement of the embedded weld control system[J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2008, 38(4): 37 -41 .
[4] KONG Xiang-zhen,LIU Yan-jun,WANG Yong,ZHAO Xiu-hua . Compensation and simulation for the deadband of the pneumatic proportional valve[J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2006, 36(1): 99 -102 .
[5] LAI Xiang . The global domain of attraction for a kind of MKdV equations[J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2006, 36(1): 87 -92 .
[6] YU Jia yuan1, TIAN Jin ting1, ZHU Qiang zhong2. Computational intelligence and its application in psychology[J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2009, 39(1): 1 -5 .
[7] CHEN Rui, LI Hongwei, TIAN Jing. The relationship between the number of magnetic poles and the bearing capacity of radial magnetic bearing[J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2018, 48(2): 81 -85 .
[8] LI Ke,LIU Chang-chun,LI Tong-lei . Medical registration approach using improved maximization of mutual information[J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2006, 36(2): 107 -110 .
[9] JI Tao,GAO Xu/sup>,SUN Tong-jing,XUE Yong-duan/sup>,XU Bing-yin/sup> . Characteristic analysis of fault generated traveling waves in 10 Kv automatic blocking and continuous power transmission lines[J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2006, 36(2): 111 -116 .
[10] . [J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2009, 39(1): 27 -32 .
Copyright 2018 © Editorial office of Journal of Shandong University (Engineering Science)
Supported by Beijing Magtech Co.Ltd