JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE) ›› 2018, Vol. 48 ›› Issue (1): 65-70.doi: 10.6040/j.issn.1672-3961.0.2017.068

Previous Articles     Next Articles

Analysis on thermal-solid coupling properity of flat-plate film cooling

WANG Zhan1, ZHANG Chao2*   

  1. 1. School of Energy and Power Engineering, Shandong University, Jinan 250061, Shandong, China;
    2. School of Mechanical Engineering, Tianjin University of Technology, Tianjin 300384, China
  • Received:2017-02-27 Online:2018-02-20 Published:2017-02-27

PDF (PC)

477

Abstract: In order to analysis the comprehensive cooling effect and reliability of the film cooling method, the thermal-solid coupling calculating method was utilized to simulate the cooling process on the flat plate with film cooling holes. The inner temperature and the thermal stress distribution profiles were obtained, and the influence of cooling effects by different blowing ratios and hole types was compared. The results showed that the uniform inner temperature distribution was caused by the inner cooling and metal heat conduction, the thermal stress consentrated on the leading edge and trailing edge of the cooling hole. Conpared with the traditional round hole, the fan-shaped and double-jet holes could obviously improve the cooling effectiveness and decrease thermal stress. Research results could provide a reference for the cooling design of the gas turbine blade.

Key words: gas turbine, thermal-solid coupling, thermal Stress, hole type, film-cooling

CLC Number: 

  • TK225
[1] HAN J C, DUTTA S, EKKAD S. Gas turbine heat transfer and cooling technology[M]. NewYork: Taylor & Francis Book, 2000.
[2] LEYLEK J H, ZERKLE R D. Discrete jet film-cooling: a comparison of computational results with experiments[J]. ASME Journal of Transaction, 1994, 116:358-368.
[3] FRIC T F, ROSHIKO A. Vortical structure in the wake of a transverse jet[J]. Journal of Fluid Mechanics, 1994, 279:1-47.
[4] SINHA A, BOGARD D, CRAWFORD M. Film-cooling effectiveness downstream of a single row of holes with variable density ratio[J]. ASME Journal of Transaction, 1991, 113:442-449.
[5] SAUMWEBER C, SCHULZ A, WITTIG S. Free-stream turbulence effects on film-cooling with shaped holes[J]. ASME Journal of Turbomachinery, 2003, 125:65-73.
[6] BRITTINGHAM R A, LEYLEK J H. A detailed analysis of film cooling physics: part IV: compound-angle injection with shaped holes[J]. Journal of Turbomachinery, 2000, 122:133-145.
[7] HALE C A, PLESNIAK M W, RAMADHYANI S. Film cooling effectiveness for short film cooling holes fed by a narrow plenum[J]. Transactions of the ASME, 2000, 122:553-557.
[8] MCGOVERN K, LEYLEK J. A detailed analysis of film-cooling physics—compound angle injection with cylindrical holes[J]. ASME Journal of Turbomachinery, 2000, 122:113-121.
[9] LEE K D, CHOI D W, KIM K Y. Optimization of ejection angles of double-jet film-cooling holes using RBNN model[J]. International Journal of Thermal Sciences, 2013, 73:69-78.
[10] CHENG Huichuan, WU Hong, LI Yulong, et al. Effect of rotation on a downstream sister holes film cooling performance in a flat plate model[J]. Experimental Thermal and Fluid Science, 2017, 85:154-166.
[11] KE Zhaoqing, WANG Jianhua. Conjugate heat transfer simulations of pulsed film cooling on an entire turbine vane[J]. Applied Thermal Engineering, 2016, 109:600-609.
[12] JUNG E Y, CHUNG H, CHO S M, et al. Conjugate heat transfer on full-coverage film cooling with array jet impingements with various Biot numbers[J]. Experimental Thermal and Fluid Science, 2017, 83:1-8.
[13] JIANG Yuting, ZHENG Qun, DONG Ping, et al. Conjugate heat transfer analysis of leading edge and downstream mist—air film cooling on turbine vane[J]. International Journal of Heat and Mass Transfer, 2015, 90:613-626.
[14] 孙杰, 宋迎东, 孙志刚. 涡轮冷却叶片热固耦合分析与优化设计[J]. 航空动力学报, 2008, 23(12):2162-2169. SUN Jie, SONG Yingdong, SUN Zhigang. Thermeset coupling analysis and optimization design of turbine cooling blade[J]. Aerospace Power, 2008, 23(12): 2162-2169.
[15] 胡捷. 燃气轮机透平叶片闭式蒸汽冷却研究[D]. 北京: 中国科学院研究生院, 2008. HU Jie. Investigation on closed-loop steam cooling schemes of a gas turbine guide vane[D]. Beijing: Graduates University of Chinese Academy of Sciences, 2008.
[16] ZHU W, WANG J W, YANG L, et al. Modeling and simulation of the temperature and stress field in a 3D turbine blade coated with thermal barrier coatings[J]. Surface and Coating Technology, 2017, 315:443-453.
[17] CITARELLA R, GIANNELLA V, VIVO E. Impacts of geometric parameters of double-jet film cooling on anti-kidney vortex structure and cooling effectiveness[J]. Theoretical and Applied Fracture Mechanics, 2016, 86:143-152.
[18] CHUNG H, SOHN H S, PARK J S. Thermo-structural analysis of cracks on gas turbine vane segment having multiple airfoils[J]. Energy, 2017, 118:1275-1285.
[19] 王湛, 张超, 刘建军. 平板圆孔气膜冷却的热弹耦合分析[J]. 航空动力学报, 2015, 30(6): 1298-1306. WANG Zhan, ZHANG Chao, LIU Jianjun. Thermo-elastc coupling analysis of round-hole flat-plate film-cooling[J]. Journal of Aerospace Power, 2015, 30(6): 1298-1306.
[20] WANG Zhan, LIU Jianjun, ZHANG Chao. Impacts of geometric parameters of double-jet film cooling on anti-kidney vortex structure and cooling effectiveness [C] //Proceedings of ASME Turbo Expo 2013. Texas, USA: ASME Press, 2013: GT94038.1-GT94038.9.
[1] QI Jinsheng, AN Chunguo, BAI Jie, WANG Zhan. Study on matching property of supports and stiffeneron circular exhaust duct [J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2017, 47(1): 125-130.
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed   
No Suggested Reading articles found!
Copyright 2018 © Editorial office of Journal of Shandong University (Engineering Science)
Supported by Beijing Magtech Co.Ltd