JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE) ›› 2011, Vol. 41 ›› Issue (5): 21-25.

• Articles • Previous Articles     Next Articles

Experimental research on heat transfer enhancement characteristics of  a new type of flow-induced elastic tube bundle

TIAN Mao-cheng1, JIANG Bo2, LENG Xue-li1, CHENG lin1   

  1. 1. School of Energy Source and Power Engineering, Shandong University, Jinan 250061, China;
    2. Shandong Electric Power Research Institute, Jinan 250061, China
  • Received:2011-08-20 Online:2011-10-16 Published:2011-08-20

Abstract:

Comprehensive heat transfer experimental platform was set up to investigate the heat transfer characteristics of a new type elastic tube bundle under different experimental conditions. In the experiment, variations of the external, internal and overall heat transfer coefficients with Reynolds number were obtained. The experimental results show that the average convective heat transfer coefficient outside the tube for the new type elastic tube bundle is 3 times more than that of the stationary tube bundle at the same Reynolds numbers, which indicates a significant heat transfer enhancement. From the comparison of experimental results under different conditions, it can be conclude that the best heat transfer performance can be obtained for the steamwater heat transfer, which is better than that of the waterwater heat transfer, and the constant heat flux heat transfer exhibits the poorest performance. The reason is that the fluid medium inside the tube has great influence on vibration characteristics of the new type elastic tube bundle and the intensification of the tube bundle vibration leads to the enhancement of heat transfer performance. 

Key words: vibration, heat transfer enhancement, elastic tube bundle, heat exchanger

[1] WU Huachun, XIE Siyuan, CHEN Changhao. Design and experiment of cascade PID control for Maglev actuator [J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2018, 48(4): 88-93.
[2] LI Chao, WANG Zengcai, ZHANG Wanzhi, HUANG Xianhua, ZHU Shuchuan, MENG Huai. Dynamic modeling of tail rope and swing parameters analysis [J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2015, 45(6): 65-70.
[3] LU Dan, ZHOU Yiqi. Vibration analysis of excavator seat based on EEMD and CWT [J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2015, 45(3): 58-64.
[4] LIU Bo, WANG Youzhi*, AN Junjiang, WANG Yilin, YUAN Quan. The spatial model of vehicle-pavement coupling vibration and its dynamic responses analysis [J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2014, 44(3): 83-89.
[5] CHENG Shen, SUN Feng-zhong*. Experimental analysis of condensation heat transfer characteristics under vacuum condition of Nickel based implanted tube bundle [J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2014, 44(1): 90-94.
[6] KUANG Jian1, WANG Ming-bin2,3, ZHANG Bo4, ZHANG Dun-fu4*. Effect of train-induced vibration on the sensitive structure in city [J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2013, 43(6): 72-76.
[7] CHE Cui-cui, TIAN Mao-cheng*, LENG Xue-li. Numerical simulations on convective heat transfer characteristics of
 laminar flow with longitudinal vortex induced by winglets
[J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2013, 43(5): 104-110.
[8] ZHANG Jing-zhi, TIAN Mao-cheng*, ZHANG Guan-min, LENG Xue-li. Effects of the contact points distribution on heat transfer and resistance performances of plate heat exchangers [J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2012, 42(6): 121-126.
[9] JIANG Bo1, TIAN Mao-cheng2*, HAO Wei-dong1, LIU Fu-guo1. Experiment and numerical simulation on inherent vibration charact eristics of the new elastic tube bundle [J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2012, 42(4): 132-136.
[10] LIU Fei-fei, LI Jian-ping, CHEN Guo-qiang, LUO Si-te, LI Zeng-yong*. Biomechanical model of seated human body exposed to vertical vibration [J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2012, 42(4): 103-107.
[11] BIAN Bin1, LIU Shu-qin1, HE Si-yan2, LI De-guang1. Analysis of beat vibration phenomenon in the AMB spindle [J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2012, 42(3): 133-137.
[12] LIAN Gen-kuan1, TIAN Mao-cheng2, LENG Xue-li2. Fouling properties of a vibration pipe under the condition of constant heat flux [J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2012, 42(2): 97-101.
[13] LV Yidan1, LIU Yungang2, ZHANG Zhensheng3. Analysis of  flat crankshaft engines vibration sources and design of the balance system [J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2011, 41(2): 154-157.
[14] TANG Yu-feng, TIAN Mao-cheng, LENG Xue-li. Field synergy analyses on inner flow and heat transfer
characteristics of spirally corrugated tubes
[J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2011, 41(2): 158-162.
[15] GE Mao-jie1,2, SUN Jie1,2*, LI Jian-feng1,2. Study on milling stability of thin-walled titanium alloy components with paraffin reinforcement [J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2011, 41(1): 71-77.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
No Suggested Reading articles found!