您的位置:山东大学 -> 科技期刊社 -> 《山东大学学报(工学版)》

山东大学学报 (工学版) ›› 2023, Vol. 53 ›› Issue (1): 25-31.doi: 10.6040/j.issn.1672-3961.0.2022.142

• • 上一篇    

多因素作用下水泥乳化沥青胶浆性能特征及机理

郭豪彦1,王振军1*,张海宝1,史文涛1,况栋梁2   

  1. 1. 长安大学材料科学与工程学院, 陕西 西安 710061;2. 交通铺面材料教育部工程研究中心, 陕西 西安 710064
  • 发布日期:2023-02-13
  • 作者简介:郭豪彦(1993— ),男,山西运城人,博士研究生,主要研究方向为道路材料. E-mail:hyguo@chd.edu.cn. *通信作者简介:王振军(1978— ),男,山东潍坊人,教授,博士生导师,主要研究方向为道路材料. E-mail:zjwang@chd.edu.cn.
  • 基金资助:
    国家自然科学基金面上项目(51978067);新疆生产建设兵团科技发展项目(2021DB005);陕西省重点研发计划项目(2022GY-417);陕西省交通科技项目(21-53K)

Performance characteristics and mechanism of cement emulsified asphalt mortar under the action of multiple factors

GUO Haoyan1, WANG Zhenjun1*, ZHANG Haibao1, SHI Wentao1, KUANG Dongliang2   

  1. 1. School of Materials Science and Engineering, Chang'an University, Xi'an 710061, Shaanxi, China;
    2. Engineering Research Center of Pavement Materials of Ministry of Education of P.R. China, Chang'an University, Xi'an 710064, Shaanxi, China.
  • Published:2023-02-13

摘要: 为揭示多因素作用下水泥乳化沥青胶浆(cement emulsified asphalt mortar, CEA)的水化特征及强度形成机理,选取乳化沥青与水泥质量比m(A)/m(c)、水灰比和养护方式等因素,研究新拌CEA的流动性以及在凝结硬化过程中水泥水化进程、力学性能、水分蒸发速率以及内部孔隙结构的发展规律。结果表明,随着m(A)/m(c)的增加,水泥水化诱导期不断延长,CEA的流动性与内部结构致密性遭到劣化,抗压强度受到不利影响;水灰比的增加虽可以减弱乳化沥青对水泥水化的延缓作用,但高水灰比CEA的内部水分蒸发速率较高,基体内部结构疏松多孔,抗压强度大幅降低;对于低m(A)/m(c)和高水灰比的CEA,可通过裹覆养护降低CEA基体内部水分蒸发速率,进而提升CEA的抗压强度。本研究揭示了多因素作用下水泥乳化沥青胶浆的性能特征及机理,为高性能水泥乳化沥青胶浆的设计提供理论依据。

关键词: 水泥乳化沥青胶浆, 流动性, 抗压强度, 水化热, 水分蒸发速率

中图分类号: 

  • U414
[1] 姚玉权, 黄伯承, 宋亮, 等. 多来源RAP下RHMA材料组成的动态控制策略[J]. 山东大学学报(工学版), 2022, 52(2): 1-10. YAO Yuquan, HUANG Bocheng, SONG Liang, et al. Dynamic control strategy for RHMA material composition undermulti-source RAP[J]. Journal of Shandong University(Engineering Science), 2022, 52(2): 1-10.
[2] GUO Haoyan, WANG Zhenjun, LIANG Qingyun, et al. Improvement of stability and mechanical properties of cement asphalt emulsion composites using nano fibrillated celluloses[J]. Cement and Concrete Composites, 2022, 125: 104330.
[3] 张吉哲, 郭晨晨, 苏春华, 等. 赤泥沥青混合料动态响应与水稳定性提升[J]. 长安大学学报(自然科学版), 2021, 41(5): 11-22. ZHANG Jizhe, GUO Chenchen, SU Chunhua, et al. Dynamic response and moisture stability improvement of red mud asphalt mixture[J]. Journal of Chang'an University(Natural Science Edition), 2021, 41(5): 11-22.
[4] DULAIMI Anmar, SHANBARA Hayder Kamil, AL-RIFAIE Ali. The mechanical evaluation of cold asphalt emulsion mixtures using a new cementitious material comprising ground-granulated blast-furnace slag and a calcium carbide residue[J]. Construction and Building Materials, 2020, 250(30): 118808.
[5] RONALD Mercado, LUIS Fuentes Pumarejo. Asphalt emulsions formulation: state-of-the-art and dependency of formulation on emulsions properties[J]. Construction and Building Materials, 2016, 123: 162-173.
[6] 王振军, 张含笑, 梁晴陨, 等. 乳化沥青胶浆对RAP裹覆程度的量化评价[J]. 中国公路学报, 2021, 34(10): 111-124. WANG Zhenjun, ZHANG Hanxiao, LIANG Qingyun, et al. Quantitative evaluation of emulsified asphalt mortar on RAP coating degree[J].China Journal of Highway and Transport, 2021, 34(10): 111-124.
[7] ALHARBI Fawaz, ALSHUBRUMI Fahad, ALMOSHAOGEH Meshal, et al. Sustainability evaluation of cold in-place recycling and hot mix asphalt pavements: a case of Qassim, Saudi Arabia[J]. Coatings, 2022, 12(1): 50.
[8] XU Jian, HUANG Songchang, QIN Yongchun, et al. The impact of cement contents on the properties of asphalt emulsion stabilized cold recycling mixtures[J]. International Journal of Pavement Research and Technology, 2011, 4(1): 48-55.
[9] 孔祥明, 张艳荣, 张敬义, 等. 新拌水泥沥青浆体的流动性及显微结构研究[J]. 建筑材料学报, 2011, 14(4): 569-575. KONG Xiangming, ZHANG Yanrong, ZHANG Jingyi, et al. Investigationon flowability and microstructure of fresh cement asphalt binder[J]. Journal of Building Materials, 2011, 14(4): 569-575.
[10] 彭博, 吴开, 陈宇亮. 低掺量乳化沥青对水泥砂浆性能影响研究[J]. 工程技术研究, 2018(11): 98-100. PENG Bo, WU Kai, CHEN Yuliang. Study on the influence of low content emulsified asphalt on the performance of cement mortar[J]. Engineering and Technological Research, 2018(11): 98-100.
[11] 程爱珍. 蒸发量的影响因素及异常数据的分析处理[J]. 贵州气象, 2013, 37(6): 57-59. CHENG Aizhen. Influence factors of evaporation and analysis and processing of abnormal data[J]. Journal of Guizhou Meteorology, 2013, 37(6): 57-59.
[12] JIANG Wei, SHA Aimin, XIAO Jingjing, et al. Experimental study on materials composition design and mixture performance of water-retentive asphalt concrete[J]. Construction and Building Materials, 2016, 111: 128-138.
[13] FANG Xing, GARCIA Alvaro, WINNEFELD Frank, et al. Impact of rapid-hardening cements on mechanical properties of cement bitumen emulsion asphalt[J]. Materials and Structures, 2016, 49(1/2): 487-498.
[14] WANG Zhenjun, SHU Xiang, RUTHERFORD Tyler, et al. Effects of asphalt emulsion on properties of fresh cement emulsified asphalt mortar[J]. Construction and Building Materials, 2015, 75: 25-30.
[15] DU Shaowen. Mechanical properties and shrinkage characteristics of cement stabilized macadam with asphalt emulsion[J]. Construction and Building Materials, 2019, 203: 408-416.
[16] FAN Suying, LI Chixuan, XU Tao. Effects of prepared carbon nanofibers on properties of emulsified asphalt[J]. Journal of Testing and Evaluation, 2021, 49(6): 20200589.
[17] 朱晓斌, 洪锦祥, 李炜. 破乳行为对CA浆体流变性能的影响及机理[J]. 建筑材料学报, 2017, 20(4): 548-555. ZHU Xiaobin, HONG Jinxiang, LI Wei. Effect of demulsification behavior of emulsified asphalt on rheological properties in CA paste and its mechanism[J]. Journal of Building Materials, 2017, 20(4): 548-555.
[1] 刘健,胡南琦,徐宝军,岳秀丽,齐泊良,仲奇. 水泥基土石坝防渗注浆材料试验[J]. 山东大学学报(工学版), 2018, 48(2): 39-45.
[2] 卜良桃,袁海涛. 纤维水泥砂浆与混凝土粘结性能双面剪切试验研究[J]. 山东大学学报(工学版), 2016, 46(4): 76-82.
[3] 周海龙,申向东,薛慧君. 小龄期水泥土无侧限抗压强度试验研究[J]. 山东大学学报(工学版), 2014, 44(1): 75-79.
[4] 张爱娟,高增丽,王卫伟,李成峰. 有机泡沫浸渍法制备多孔羟基磷灰石生物支架的研究[J]. 山东大学学报(工学版), 2012, 42(3): 105-109.
[5] 葛智1,王昊2,张堃1,李鹏承1. 塑料砂浆的性能研究[J]. 山东大学学报(工学版), 2012, 42(1): 106-108.
[6] 葛智1,王昊2*,郑丽1,毛洪录1. 废黏土砖粉混凝土的性能研究[J]. 山东大学学报(工学版), 2012, 42(1): 104-105.
[7] 高桂波1, 钱春香2, 岳钦艳3, 王勇威1, 鲁统卫1. 预填埋相变材料对混凝土水化热温升的降低效果[J]. 山东大学学报(工学版), 2011, 41(6): 91-96.
[8] 孙国富1,2,李术才2,路为2,陈雷3. 复合胶凝材料钢管混凝土拱肋水化过程截面温度场试验及数值模拟分析[J]. 山东大学学报(工学版), 2011, 41(3): 106-111.
[9] 孙欣,刘常春,赵玉娟,王新沛. 血液在体流动性无创测量方法及系统[J]. 山东大学学报(工学版), 2010, 40(6): 36-40.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
No Suggested Reading articles found!