双节理岩体TBM滚刀破岩过程数值模拟

doi:10.6040/j.issn.1672-3961.0.2019.744

摘要/Abstract

摘要： 为了研究节理特征对全断面掘进机(tunnel boring machine, TBM)盘形滚刀破岩的影响,采用颗粒流方法建立盘形滚刀与含平行双节理岩体的二维数值模型,进行不同节理倾角和间距的30组数值试验,根据数值试验结果研究岩体破裂模式、滚刀竖向接触力峰值随节理倾角和间距的变化规律、滚刀破岩过程中细观裂纹扩展规律。研究结果表明:不同的节理特征下,滚刀破岩可以分为4种基本的破裂模式;滚刀竖向接触力峰值随节理倾角的增大呈现先减小后增大的趋势,在节理倾角为30°或45°时最小,在节理倾角为90°时最大;滚刀竖向接触力峰值随节理间距的增大总体上呈现增大趋势;随滚刀的贯入,滚刀竖向接触力与细观裂纹个数有3个关联的变化阶段。通过研究TBM滚刀与节理岩体相互作用机制,揭示不同节理特征对滚刀破岩的影响规律,对TBM滚刀的合理设计和施工有一定的指导意义。

关键词: 全断面掘进机, 滚刀破岩, 颗粒流模拟, 节理岩体, 破裂模式

Abstract: Effects of joint characteristics on rock fragmentation process by full-face rock tunnel boring machine(TBM)disc cutter was studied by numerical simulation using the particle discrete element method. A numerical model including double-joint rock mass and a disc cutter was established. 30 sets of numerical simulation tests with different joint spacing and joint angle were carried out to explore the failure modes of rock mass, study the variations of peak value of vertical contact force of cutter with joint spacing and joint angle, and analyze the characteristics of microscopic cracks growth during the rock fragmentation process. Results showed that four rock fragmentation modes were proposed as the joint characteristics changes; the peak value of vertical contact force of cutter first decreased and then increased with joint angle, and the minimum value was at 30° or 45° and the maximum value was at 90°; the peak value of vertical contact force of cutter generally increased with joint spacing; the amount of microscopic cracks was related to the vertical contact force of cutter and the relation was divided into three stages. These conclusions had certain guiding significance for the rational design of TBM cutter and TBM construction.

Key words: tunnel boring machine(TBM), rock fragmentation, particle flow simulation, jointed rock mass, fragmentation mode

中图分类号:

U453

施雪松,管清正,王文扬,许振浩,林鹏,王孝特,刘洁. 双节理岩体TBM滚刀破岩过程数值模拟[J]. 山东大学学报 (工学版), 2020, 50(4): 70-79.

SHI Xuesong, GUAN Qingzheng, WANG Wenyang, XU Zhenhao, LIN Peng, WANG Xiaote, LIU Jie. Numerical simulation of rock fragmentation process by TBM cutter in double-joint rock mass[J]. Journal of Shandong University(Engineering Science), 2020, 50(4): 70-79.

参考文献

[1] 张镜剑. TBM的应用及其有关问题和展望[J]. 岩石力学与工程学报, 1999, 18(3): 363-367. ZHANG Jingjian. The application and some problems of TBM and its prospects[J]. Chinese Journal of Rock Mechanics and Engineering, 1999, 18(3): 363-367.
[2] 张照煌. 全断面岩石掘进机盘形滚刀破岩机理的探讨[J]. 矿山机械, 1995(10): 27-29. ZHANG Zhaohuang. Discussion on the rock fragmentation mechanism of disc cutter of full face rock tunnel boring machine[J]. Mining & Processing Equipment, 1995(10): 27-29.
[3] 龚秋明, 苗崇通, 马洪素, 等. 节理间距对滚刀破岩影响的线性破岩试验研究[J]. 土木工程学报, 2015, 48(6): 97-105. GONG Qiuming, MIAO Chongtong, MA Hongsu, et al. Effect of joint spacing on rock breaking under disc cutter by linear cutting experiments[J]. China Civil Engineering Journal, 2015, 48(6): 97-105.
[4] 马洪素, 龚秋明, 王驹, 等. 围压对TBM滚刀破岩影响规律的线性切割试验研究[J]. 岩石力学与工程学报, 2016, 35(2): 346-355. MA Hongsu, GONG Qiuming, WANG Ju, et al. Linear cutting tests on effect of confining stress on rock fragmentation by TBM cutter[J]. Chinese Journal of Rock Mechanics and Engineering, 2016, 35(2): 346-355.
[5] 刘立鹏, 汪小刚, 刘海舰, 等. TBM滚刀破岩机理与影响因素数值模拟研究[J]. 中国水利水电科学研究院学报, 2017, 15(5): 346-353. LIU Lipeng, WANG Xiaogang, LIU Haijian, et al. Numerical simulation research on rock breakage mechanism and influence TBM cutters[J]. Journal of China Institute of Water Resources and Hydropower Research, 2017, 15(5): 346-353.
[6] SU O, AKCIN N A. Numerical simulation of rock cutting using the discrete element method[J]. International Journal of Rock Mechanics & Mining Sciences, 2011, 48(3): 434-442.
[7] 张魁, 夏毅敏, 谭青, 等. 不同围压条件下TBM刀具破岩模式的数值研究[J]. 岩土工程学报, 2010, 32(11): 1780-1787. ZHANG Kui, XIA Yimin, TAN Qing, et al. Numerical study on modes of breaking rock by TBM cutter under different confining pressures[J]. Chinese Journal of Geotechnical Engineering, 2010, 32(11): 1780-1787.
[8] 谭青, 易念恩, 夏毅敏, 等. TBM滚刀破岩动态特性与最优刀间距研究[J]. 岩石力学与工程学报, 2012, 31(12): 2453-2464. TAN Qing, YI Nianen, XIA Yimin, et al. Research on rock dynamic fragmentation characteristics by TBM cutters and cutter spacing optimization [J]. Chinese Journal of Rock Mechanics and Engineering, 2012, 31(12): 2453-2464.
[9] 苏利军, 孙金山, 卢文波.基于颗粒流模型的TBM滚刀破岩过程数值模拟研究[J].岩土力学, 2009, 30(9): 2823-2829. SU Lijun, SUN Jinshan, LU Wenbo. Research on numerical simulation of rock fragmentation by TBM cutters using particle flow method[J]. Rock and Soil Mechanics, 2009, 30(9): 2823-2829.
[10] 孙伟, 郭莉, 周建军, 等. TBM双滚刀破岩过程模拟及刀圈结构设计[J]. 煤炭学报, 2015, 40(6): 1297-1302. SUN Wei, GUO Li, ZHOU Jianjun, et al. Rock fragmentation simulation under dual TBM disc cutter and design of cutter ring[J]. Journal of China Coal Society, 2015, 40(6): 1297-1302.
[11] 杨圣奇, 黄彦华. TBM滚刀破岩过程及细观机理颗粒流模拟[J]. 煤炭学报, 2015, 40(6): 1235-1244. YANG Shengqi, HUANG Yanhua. Particle flow simulation on rock fragmentation process and meso-mechanism by a single TBM cutter[J]. Journal of China Coal Society, 2015, 40(6): 1235-1244.
[12] 孙建中,杨圣奇,温森.深部节理岩体TBM滚刀破岩效果及最优刀间距研究[J]. 采矿与安全工程学报, 2015, 32(1): 126-131. SUN Jianzhong, YANG Shengqi, WEN Sen. Research on deep jointed rock fragmentation by TBM cutters and cutters spacing optimization[J]. Journal of Mining & Safety Engineering, 2015, 32(1): 126-131.
[13] 黄彦华,杨圣奇.非共面双裂隙红砂岩宏细观力学行为颗粒流模拟[J]. 岩石力学与工程学报, 2014, 33(8): 1644-1653. HUANG Yanhua, YANG Shengqi. Particle flow simulation of macro-and meso-mechanical Behavior of red sandstone containing two pre-existing Non-coplanar fissures[J]. Chinese Journal of Rock Mechanics and Engineering, 2014, 33(8): 1644-1653.
[14] 唐谦,李云安.围压对岩石裂纹扩展影响的颗粒流模拟研究[J]. 长江科学院院报, 2015, 32(4): 81-85. TANG Qian, LI Yunan. Particle flow simulation on the influence of confinement on crack propagation in pre-cracked rock[J]. Journal of Yangtze River Scientific Research Institute, 2015, 32(4): 81-85.
[15] 谭青, 张旭辉, 夏毅敏, 等. 不同围压与节理特征下盘形滚刀破岩数值研究[J]. 煤炭学报, 2014, 39(7): 1220-1228. TAN Qing, ZHANG Xuhui, XIA Yimin, et al. Numerical study on breaking rock by disc cutter at different confining pressure and joint characteristics case[J]. Journal of China Coal Society, 2014, 39(7): 1220-1228.
[16] 刘汉东, 姜彤, 刘海宁, 等. 岩土工程数值计算方法[M]. 郑州: 黄河水利出版社, 2011: 72.
[17] 石崇, 徐卫亚. 颗粒流数值模拟技巧与实践[M]. 北京: 中国建筑工业出版社, 2015: 8.
[18] 丛宇, 王在泉, 郑颖人, 等. 基于颗粒流原理的岩石类材料细观参数的试验研究[J]. 岩土工程学报, 2015, 37(6): 1031-1040. CONG Yu, WANG Zaiquan, ZHENG Yingren, et al. Experimental study on microscopic parameters of brittle materials based on particle flow theory[J]. Chinese Journal of Geotechnical Engineering, 2015, 37(6): 1031-1040.
[19] 宋克志, 李传明, 袁大军, 等. 盾构隧道施工盘形滚刀推力分布规律研究[J]. 岩石力学与工程学报, 2008, 27(增刊2): 3875. SONG Kezhi, LI Chuanming, YUAN Dajun, et al. Study on distribution regularities of disc cutter thrust force for shield tunneling[J]. Chinese Journal of Rock Mechanics and Engineering, 2008, 27(Suppl.2): 3875.
[20] 尹成薇,梁冰,姜利国. 基于颗粒流方法的砂土宏-细观参数关系分析[J].煤炭学报, 2011,36(增刊2): 264-267. YIN Chengwei, LIANG Bing, JIANG Liguo. Analysis of relationship between macro-micro-parameters of sandy soil based on particle flow theory[J]. Journal of China Coal Society, 2011, 36(Suppl.2): 264-267.
[21] 赵国彦, 戴兵, 马驰. 平行黏结模型中细观参数对宏观特性影响研究[J]. 岩石力学与工程学报, 2012, 31(7): 1491-1498. ZHAO Guoyan, DAI Bing, MA Chi. Study of effects of microparameters on macroproperties for parallel bonded model[J]. Chinese Journal of Rock Mechanics and Engineering, 2012, 31(7): 1491-1498.
[22] POTYONDY D O, CUNDALL P A. A bonded-particle model for rock[J]. International Journal of Rock Mechanics & Mining Sciences, 2004, 41(8): 1329-1364.
[23] 张彪, 张志强, 孙飞, 等. 基于三维颗粒流模型的TBM滚刀顺次破岩的研究[J]. 中国铁道科学, 2017, 38(4): 70-76. ZHANG Biao, ZHANG Zhiqiang, SUN Fei, et al. Study on rock cutting sequentially by TBM disc cutter based on three-dimensional particle flow model[J]. China Railway Science, 2017, 38(4): 70-76.
[24] 孙金山, 陈明, 陈保国, 等. TBM滚刀破岩过程影响因素数值模拟研究[J]. 岩土力学, 2011, 32(6): 1891-1897. SUN Jinshan, CHEN Ming, CHEN Baoguo, et al. Numerical simulaiton of influence factors for rock fragmentation by TBM cutters[J]. Rock and Soil Mechanics, 2011, 32(6): 1891-1897.
[25] YANG S Q, HUANG Y H. Particle flow study on strength and meso-mechanism of Brazilian splitting test for jointed rock mass[J]. Acta Mechanica Sinica, 2014, 30(4): 547-558.

多维度评价

Viewed

Full text

Abstract

Cited

Shared

Discussed