山东大学学报(工学版) ›› 2017, Vol. 47 ›› Issue (1): 104-111.doi: 10.6040/j.issn.1672-3961.0.2016.108
孔振兴,皮大伟*,王显会,王洪亮,陈山
KONG Zhenxing, PI Dawei*, WANG Xianhui, WANG Hongliang, CHEN Shan
摘要： 针对车辆主动侧倾控制问题,基于车辆侧倾与横摆响应特性分析,提出一种液压式主动稳定杆(active stabilizer bar, ASB)系统的设计方案。设计滑模控制算法,以提高车辆的侧倾稳定性。对前、后轴主动式稳定杆的反侧倾力矩进行动态分配,以改善车辆的转向特性。基于MATLAB/Simulink,建立了14自由度整车动力学模型、液压系统模型、路面输入模型等,在典型工况下分别对PID+前馈控制和滑模控制系统进行仿真研究。仿真结果表明:与传统的PID+前馈控制相比,采用滑模控制算法的液压式ASB系统在鲁棒性和适应性方面具有明显优势,有效地改善车辆的侧倾与横摆响应,进一步提高了车辆的侧倾稳定性、行驶平顺性与操纵稳定性。
中图分类号:
| [1] 金智林,翁建生,胡海岩. 汽车侧翻及稳定性分析[J].机械科学与技术, 2007, 26(3):355-358. JIN Zhilin, WENG Jiansheng, HU Haiyan. Analysis of vehicles rollover stability[J]. Mechanical science and Technology, 2007, 26(3):355-358. [2] MIZUTA Y, SUZUMURA M, MATSUMOTO S. Ride comfort enhancement and energy efficiency using electric active stabiliser system[J]. Vehicle System Dynamics: International Journal of Vehicle Mechanics & Mobility, 2010, 48(11):1305-1323. [3] JEON K, HWANG H, CHOI S, et al. Development of an electric active roll control(ARC)algorithm for a SUV[J]. International Journal of Automotive Technology, 2012, 13(2):247-253. [4] 夏如艇,武马修一. 采用电机作动器的主动悬架系统的仿真[J].汽车工程,2013, 35(5):445-450. XIA Ruting, BUMA Shunichi. A simulation of active suspension system with motor actuator[J]. Automotive Engineering, 2013, 35(5): 445-450. [5] 周兵,吕绪宁,范璐,等. 主动悬架与主动横向稳定杆的集成控制[J]. 中国机械工程, 2014(14):1978-1983. ZHOU Bing, LYU Xuning, FAN Lu, et al. Integrated control of active suspension system and active roll stabilizer [J]. China Mechanical Engineering, 2014(14):1978-1983. [6] KIM S, PARK K, SONG H J, et al. Development of control logic for hydraulic active roll control system[J]. International Journal of Automotive Technology, 2012, 13(1):87-95. [7] 孔振兴,皮大伟,王洪亮,等. 考虑液压迟滞的汽车主动式稳定杆改进算法[J].科学技术与工程,2016, 16(26):122-126, 134. KONG Zhenxing, PI Dawei, WANG Hongliang, et al. Improved control algorithm for vehicle active stabilizer bar considering hydraulic delay[J]. Science Technology and Engineering, 2016, 16(26):122-126, 134. [8] SORNIOTTI A, D'ALFIO N. Vehicle dynamics simulation to develop an active roll control system[C] //SAE Technical Paper. Warrendale, the United States: SAE World Congress & Exhibition, 2007. [9] 唐新蓬,段小成. 汽车侧倾稳定主动控制系统的仿真研究[J]. 汽车技术, 2008(8): 23-27. TANG Xinpeng, DUAN Xiaocheng. Simulation and study of vehicle roll active control system[J]. Automobile Technology, 2008(8):23-27. [10] 王梦琳,孙涛,郑松林,等. 基于底盘子系统协同控制的车辆防侧翻性能分析[J]. 系统仿真学报, 2015, 27(1):163-170. WANG Mengling, SUN Tao, ZHENG Songlin, et al. Simulation of anti-rollover performance based on chassis collaborative control[J]. Journal of System Simulation, 2015, 27(1):163-170. [11] LAM Q, WANG Lifu, ZHANG Nong. Experimental implimentation of a fuzzy controller for an active hydraulically interconnected suspension on a sport utility vehicle[C] //Intelligent Vehicles Symposium. Piscataway, the United States: IEEE, 2013:383-390. [12] 赵韩,赵福民,黄康,等. 液压马达式汽车主动稳定杆系统建模与控制[J]. 中国机械工程, 2016, 27(14):1976-1981. ZHAO Han, ZHAO Fumin, HUANG Kang, et al. Modeling and control of vehicle active stabilizer bar system with hydraulic motor[J]. China Mechanical Engineering, 2016, 27(14):1976-1981. [13] VARGA B, NÉMETH B, GÁSPÁR P. Design of anti-roll bar systems based on hierarchical control[J]. Strojniški Vestnik-Journal of Mechanical Engineering, 2015, 61(6): 374-382. [14] KIM H J, YANG H S, PARK Y P, et al. Robust roll control of a vehicle: experimental study using a hardware-in-the-loop set-up[J]. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 2002, 216(1):1-9. [15] KIM H J. Robust roll motion control of a vehicle using integrated control strategy[J]. Control Engineering Practice, 2011, 19: 820-827. [16] KONG Zhenxing, PI Dawei, WANG Xianhui, et al. Design and evaluation of a hierarchical control algorithm for an electric active stabilizer bar system[J]. Strojniški Vestnik-Journal of Mechanical Engineering, 2016, 62(10): 565-576. [17] KONG Zhenxing, PI Dawei, CHEN Shan, et al. Design and simulation of hierarchical control algorithm for electric active stabilizer bar system[C] //Chinese Control and Decision Conference. Piscataway, the United States: IEEE, 2016. [18] GHIKE C, SHIM T. 14 degree-of-freedom vehicle model for roll dynamics study[C] //SAE Technical Paper. Warrendale, the United States: SAE World Congress & Exhibition, 2006. [19] DUGOFF H, FANCHER P S, SEGEL L. An analysis of tire traction properties and their influence on vehicle dynamic performance[C] //International Automobile Safety Conference. Warrendale, the United States: SAE Transactions, 1970. [20] 张立军,张天侠.车辆四轮相关时域随机输入通用模型的研究[J].农业机械学报, 2005(12):29-31. ZHANG Lijun, ZHANG Tianxia. Study on general model of random inputs of the vehicle with four wheels correlated in time domain[J]. Transactions of the Chinese Society for Agricultural Machinery, 2005(12):29-31. |
| No related articles found! |
|
||
