您的位置:山东大学 -> 科技期刊社 -> 《山东大学学报(工学版)》

山东大学学报(工学版) ›› 2009, Vol. 39 ›› Issue (6): 143-146.

• 其它 • 上一篇    下一篇

竖直加热平板对流边界层的数值模拟

闫理贵,傅松   

  1. 山东大学能源与动力工程学院, 山东 济南 250061
  • 收稿日期:2008-11-06 出版日期:2009-12-16 发布日期:2009-12-16
  • 通讯作者: 傅松(1964-),女,辽宁辽阳人,副教授,研究方向为流动与传热的数值计算.E-mail:fsfsfs606@sdu.edu.cn
  • 作者简介:闫理贵(1985-),男,安徽黄山人,硕士研究生,研究方向为内燃机的模拟计算. E-mail:lgupkt@yahoo.com.cn
  • 基金资助:

    山东省自然科学基金资助项目(Y2007F26)

Numerical simulation of the convection boundary layer in air along a vertical heated plate

  1. School of Energy and Power Engineering, Shandong University, Jinan 250061, China
  • Received:2008-11-06 Online:2009-12-16 Published:2009-12-16

摘要:

为了研究壁面温度和来流速度对边界层特性的影响,采用计算流体动力学(computational fluid dynamics,CFD)软件对空气流过竖直加热平板的对流边界层特性进行数值模拟.采用k-ε模型和SIMPLE算法分别对不同壁面温度的自然对流和不同来流速度的混合对流进行模拟计算,得到温度分布和速度分布,通过分析结果表明:高温对边界层特性的影响很小,而随着空气来流速度的增大,速度边界层和热边界层的厚度减小,最大速度增大.

关键词: 自然对流;混合对流;边界层;壁面温度;来流速度

Abstract:

In order to study the effect of wall temperature and freestream velocity on the characteristics of the boundary layer, the characteristic in a convection boundary layer in air along a vertical heated plate was numerically simulated with CFD (computational fluid dynamics) software. The different wall temperatures for natural convection and the freestream velocity for the combined convection were simulated by the standard kε mode1 and the SIMPLEC algorithm, and the flow fields information, such as distribution of velocity and temperature were computed and analyzed. The results showed that the effect of high temperature oncharacteristics of the boundary layer was quite small,  the thicknesses of velocity and thermal boundary layers decrease, and the maximum velocity increases with the freestream velocity increasing.

Key words: natural convection; combined convection; boundary layer; walltemperature; free-stream velocity

No related articles found!
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
No Suggested Reading articles found!