您的位置:山东大学 -> 科技期刊社 -> 《山东大学学报(工学版)》

山东大学学报(工学版) ›› 2008, Vol. 38 ›› Issue (6): 95-98.

• 论文 • 上一篇    下一篇

基于ASPEN PLUS平台的生物质燃气脱焦工艺模拟

熊丽君 张忠诚   

  1. 山东大学化学与化学学院, 山东 济南 250061
  • 收稿日期:2008-09-05 出版日期:2008-12-16 发布日期:2008-12-16
  • 通讯作者: 张忠诚(1953-),男,山东蓬莱人,教授,硕士学位,主要研究方向为化学工艺及表面工程. E-mail:zhangzc8888@163.com
  • 作者简介:熊丽君(1983-),女,湖北天门人,硕士研究生,主要研究方向为生物质燃气脱焦油技术. E-mail:ritaxiong@163.com

Stimulation of tar removal from biomass gas using ASPEN PLUS

  1. School of Chemistry and Chemical Engineering, Shandong University, Jinan 250061, China
  • Received:2008-09-05 Online:2008-12-16 Published:2008-12-16

摘要:

生物质燃气中焦油的脱除是生物质燃气推广和应用中的重要环节.介绍了生物质燃气的溶剂法脱焦工艺的基本过程,利用ASPEN PLUS化工模拟软件对该过程进行了模拟计算,分析了物料的流量和温度等工艺条件的改变对于脱焦效果的影响,得到了提高焦油脱出率的最佳方案措施,为实际操作提供了参考依据.

关键词: 生物质燃气;脱焦油; ASPEN PLUS

Abstract:

 Biomass tar contained in biomass gas is still an obstacle in biomass thermo-chemical conversion technology. The basic process of tar removal by solvents was given. ASPEN PLUS, one of the most famous softwares of chemical engineering, was used to stimulate the process. The measures to increase the rate of tar removal were obtained by analyzing the influence of technological factors such as flux and temperature, which were suitable for practical productions.

Key words: biomass gas; tar removal; ASPEN PLUS

No related articles found!
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
No Suggested Reading articles found!