您的位置：山东大学 -> 科技期刊社 -> 《山东大学学报（工学版）》

山东大学学报 (工学版) ›› 2022, Vol. 52 ›› Issue (3): 86-93.doi: 10.6040/j.issn.1672-3961.0.2021.331

• • 上一篇    

基于EDEM-Fluent耦合的挖藕机喷水系统仿真优化

张自健1,2,赵军1,2,唐贤康1,2,孙超1,2,李峰3   

  1. 1.山东大学机械工程学院高效洁净机械制造教育部重点实验室, 山东 济南 250061;2.山东大学机械工程国家级实验教学示范中心, 山东 济南 250061;3.山东钢铁股份有限公司莱芜分公司焦化厂, 山东 济南 271100
  • 发布日期:2022-06-23
  • 作者简介:张自健(1997—),男,山东平度人,硕士研究生,主要研究方向为高效加工技术与智能装备. E-mail:zxx19970923@sina.com
  • 基金资助:
    山东省农业重大应用技术创新资助项目(SD2019NJ018)

Simulation and optimization of lotus root digging machine sprinkler system based on EDEM-Fluent

ZHANG Zijian1,2, ZHAO Jun1,2, TANG Xiankang1,2, SUN Chao1,2, LI Feng3   

  1. 1. Key Laboratory of High Efficiency and Clean Mechanical Manufacture of MOE, School of Mechanical Engineering, Shandong University, Jinan 250061, Shandong, China;
    2. National Demonstration Center for Experimental Mechanical Engineering Education, Shandong University, Jinan 250061, Shandong, China;
    3. Coking Plant of Laiwu Branch, Shandong Iron &
    Steel Co., Ltd., Jinan 271100, Shandong, China
  • Published:2022-06-23

PDF (PC)

205

摘要： 为分析挖藕机喷水系统各种关键参数对土壤冲击效果的影响,提出一种基于EDEM-Fluent的水射流冲击土壤仿真方法。在Fluent中模拟不同间距、不同喷射速度下多股水射流冲击水层时的速度衰减、方向变化情况;得出冲击水层后的速度后利用EDEM-Fluent耦合模拟射流以该速度冲击土壤1 s的效果。试验结果表明:随着出水管间距的增大,最大冲击深度减小,土壤颗粒速度减小;随着射流喷射速度的增大,最大冲击深度增大,土壤颗粒速度增大。在出水管间距8 mm、射流喷射速度30 m/s时对土壤的冲击效果最好。

关键词: 挖藕机, EDEM-fluent耦合仿真, 土壤建模, 喷水系统设计, Fluent仿真

中图分类号: 

  • TH11
[1] 吴昊.射流自旋式挖藕机工作机理与试验研究[D].武汉:华中农业大学,2018. WU Hao. Study on experimental and working mechanism of jetting spain type digging lotus root machine[D]. Wuhan: Huazhong Agricultural University, 2018.
[2] 张耀宏,姜喆雄. 喷流式挖藕机的研制[J].粮油加工, 1982(8):33-38. ZHANG Yaohong, JIANG Zhexiong. Study on jet lotus root digging machine[J]. Cereals and Oils Processing, 1982(8):33-38.
[3] 郭洋民.水田莲藕采挖机设计与研究[D]. 武汉:华中农业大学, 2015. GUO Yangmin. The research and design of lotus digging machine for paddy field[D]. Wuhan: Huazhong Agricultural University, 2015.
[4] 黄海东,张国忠,夏俊芳,等.4CWO-3.2型船式挖藕机的研制[J].湖北农机化,2008(3):24-25. HUANG Haidong, ZHANG Guozhong, XIA Junfang, et al. Study on 4CWO-3.2 boat-type lotus root digging machine[J]. Hubei Agricultural Mechanization, 2008(3):24-25.
[5] 冯闯闯,周勇,涂鸣,等. 螺旋推进式挖藕机的设计与试验[J]. 甘肃农业大学学报, 2020,55(4):191-199. FENG Chuangchuang, ZHOU Yong, TU Ming, et al. Design and experiment of screw-propelled type lotus root digging machine[J]. Journal of Gansu Agricultural University, 2020, 55(4):191-199.
[6] 刘向军. 一种新型手扶挖藕机的结构设计与研究[J]. 安徽农业科学, 2018, 46(10):179-182. LIU Xiangjun. Research and design on an automatic walking dig lotus root machine[J]. Journal of Anhui Agricultural Sciences, 2018, 46(10):179-182.
[7] 刘鹏, 陶雷, 吕石祥, 等. 液力驱动挖藕机的结构设计[J]. 农机化研究, 2017, 39(1):78-86. LIU Peng, TAO Lei, LÜ Shixiang, et al. The structure design of hydraulic drive lotus root digging machine[J]. Journal of Agricultural Mechanization Research, 2017, 39(1):78-86.
[8] 尤俊, 陈斯蓉. 4OZ-3型自走式水压莲藕掘取机[J]. 南方农机, 2000(6):9. YOU Jun, CHEN Sirong. 4OZ-3 self-propelled hydraulic lotus root digging machine[J]. China Southern Agricultural Machinery, 2000(6):9.
[9] 程悦荪,金先龙,胡斌祥. 挖藕机断藕率及其影响因素的研究[J]. 农业工程学报, 1986(4):58-68. CHENG Yuesun, JIN Xianlong, HU Binxiang. Study on the breaking rate of lotus root digging machine and its influencing factors[J]. Transactions of the Chinese Society of Agricultural Engineering, 1986(4):58-68.
[10] 朱守国. 水压莲藕掘取机液压系统技术难点的解决[J]. 起重运输机械, 2002, 12(12):34-34. ZHU Shouguo. Solution of technical difficulties in hydraulic system of hydraulic lotus root digging machine[J]. Hoisting and Conveying Machinery, 2002, 12(12):34-34.
[11] 刘义满,柯卫东,黄新芳.莲藕人工采挖和机械采挖技术[J]. 长江蔬菜, 2014(21):10-15. LIU Yiman, KE Weidong, HUANG Xinfang. Artificial and mechanical excavation techniques of lotus root[J]. Journal of Changjiang Vegetables, 2014(21):10-15.
[12] 刘莫尘,毛东炜,王振虎, 等.挖藕技术研究现状及黄河三角洲地区莲藕采收技术前瞻[J]. 农业工程, 2018, 8(5):1-5. LIU Mochen,MAO Dongwei,WANG Zhenhu,et al. Research status of lotus root digging technology and prospect of lotus root harvesting technology in Yellow River delta region[J] Agricultural Engineering, 2018, 8(5):1-5.
[13] 王瑜,吴修,马加清,等.山东莲藕产业现状及发展趋势[J]. 中国蔬菜, 2013(3):22-24. WANG Yu, WU Xiu, MA Jiaqing, et al. Present situation and development trend of lotus root industry in Shandong[J]. China Vegetables, 2013(3):22-24.
[14] 陈辉,陶雷,陈青,等.基于Fluent的挖藕机喷嘴仿真研究[J]. 电子世界,2016, 496(10):127-128. CHEN Hui, TAO Lei, CHEN Qing, et al. Simulation research on nozzle of lotus root digging machine based on Fluent[J]. Electronics World, 2016, 496(10):127-128.
[15] 曹威龙,周扬理,岳吉祥,等. 宽幅挖藕机多喷头出水均匀性仿真分析[J].农业装备与车辆工程,2020, 58(6):30-32. CAO Weilong, ZHOU Yangli, YUE Jixiang, et al. Simulation analysis of flow uniformity at width lotus root digging machine multi-nozzle[J]. Agricultural Equi-pment & Vehicle Engineering, 2020, 58(6):30-32.
[16] 何竞飞,陈建庚,王艾伦,等.基于涡流原理的新型挖藕喷头的流场研究[J]. 计算机仿真, 2015, 32(4):184-187. HE Jingfei, CHEN Jiangeng, WANG Ailun, et al. Study on flow field of a new digging lotus based on the vortex theory[J]. Computer Simulation, 2015, 32(4):184-187.
[17] 何枫,谢峻石,杨京龙. 喷嘴内部流道型线对射流流场的影响[J]. 应用力学学报, 2001(4):114-119. HE Feng, XIE Junshi, YANG Jinglong. Effect of nozzle geometry on aerodynamics of free jet[J]. Chinese Journal of Applied Mechanics, 2001(4):114-119.
[18] 吴楠, 贺俊林, 刘少华, 等. 基于EDEM-Fluent耦合的钙果风筛式清选装置仿真与试验[J].农业工程, 2021, 11(1):82-87. WU Nan, HE Junlin, LIU Shaohua, et al. Simulation and experiment of air screen cleaning device for cerasusnhumilis based on EDEM-Fluent coupling[J]. Agricultural Engineering, 2021, 11(1):82-87.
[19] 陈广慧, 李军, 滕杰, 等. 基于EDEM-Fluent耦合的风筛式清选装置仿真及分析[J]. 中国农机化学报, 2020, 41(5):69-73. CHEN Guanghui, LI Jun, TENG Jie, et al. Simulation and analysis of wind screen cleaning device based on EDEM-Fluent coupling[J]. Journal of Chinese Agricultural Mechanization, 2020, 41(5):69-73.
[20] 贺一鸣,向伟,吴明亮,等.基于堆积试验的壤土离散元参数的标定[J]. 湖南农业大学学报, 2018, 44(2): 216-220. HE Yiming, XIANG Wei, WU Mingliang, et al. Parameters calibration of loam soil for discrete element simulation based on the repose angle of particle heap[J]. Journal of Hunan Agricultural University, 2018, 44(2):216-220.
[1] 张宇磊,王勇,谢玉东,孙光,王艳芸,韩家桢. 新型液态金属磁流体发电动力学特性数值模拟[J]. 山东大学学报 (工学版), 2019, 49(1): 101-106.
[2] 李朋,吴华春,崔瑞芳,熊振宇. 过盈配合对磁悬浮转子动力学特性的影响[J]. 山东大学学报(工学版), 2018, 48(2): 94-99.
[3] 王汝贵,蔡敢为 . 两自由度可控平面连杆机构机电耦合系统的超谐波共振分析[J]. 山东大学学报(工学版), 2008, 38(3): 58-63 .
[4] 员冬玲,邓建新,丁泽良,段振兴 . 梯度陶瓷水煤浆喷嘴的残余热应力有限元分析[J]. 山东大学学报(工学版), 2008, 38(2): 18-22 .
[5] 陈正洪,张卧波,王勇,刘同辉,李艳 . 混合输入五杆机构实现给定轨迹的功率分配[J]. 山东大学学报(工学版), 2008, 38(1): 9-12 .
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed   
No Suggested Reading articles found!
版权所有 © 2018 《山东大学学报(工学版)》编辑部　
地址: 济南市山大南路27号（250100）　 电话: 0531-88366735　 E-mail: xbgxb@sdu.edu.cn
本系统由北京玛格泰克科技发展有限公司设计开发