您的位置:山东大学 -> 科技期刊社 -> 《山东大学学报(工学版)》

山东大学学报(工学版) ›› 2016, Vol. 46 ›› Issue (4): 68-75.doi: 10.6040/j.issn.1672-3961.0.2016.006

• • 上一篇    下一篇

沥青砂动态剪切蠕变特性

王海朋,张蓉,张晓华,毛成,周水文   

  1. 1. 四川省交通运输厅公路规划勘察设计研究院, 四川 成都 611130;2.四川省路面结构材料及养护工程实验室, 四川 成都 611130
  • 收稿日期:2016-01-08 出版日期:2016-08-20 发布日期:2016-01-08
  • 作者简介:王海朋(1984— ),男,黑龙江鹤岗人,工程师,博士,主要研究方向为沥青路面结构与材料.E-mail: wanghaipeng1@126.com
  • 基金资助:
    四川省交通科技资助项目(2013C10-1,2013A1-4)

Dynamic shear creep characteristics of asphalt mortar

WANG Haipeng, ZHANG Rong, ZHANG Xiaohua, MAO Cheng, ZHOU Shuiwen   

  1. 1. Sichuan Province Communications Department Highway Planning Survey, Design and Research Institute, Chengdu 611130, Sichuan, China;
    2. Sichuan Province Pavement Structure, Material and Maintain Engineering Laboratory, Chengdu 611130, Sichuan, China
  • Received:2016-01-08 Online:2016-08-20 Published:2016-01-08

摘要: 为了解沥青砂的复杂力学行为,给沥青混合料细观力学研究提供数据支持,将几种沥青混合料的配合比转变为沥青砂的配比,采用自主研发的沥青砂成型装置及流变仪夹具获取沥青砂的动态剪切蠕变曲线,基于Burgers模型对蠕变曲线进行拟合,获取动态剪切荷载下沥青砂的黏弹性参数,分析黏弹性参数及松弛模量的变化规律。试验结果显示,Burgers模型对沥青砂动态剪切蠕变曲线具有较好的拟合效果。相同加载时间内,相比于AC-20级配沥青混合料,SMA-16级配沥青混合料蠕变变形量更大。橡胶沥青砂的抗剪切蠕变性能最优。沥青砂蠕变变形影响规律与混合料车辙变形一般影响规律相符。试验温度、沥青用量、沥青种类和级配类型均对沥青砂的黏弹性参数和松弛模量影响显著。

关键词: 黏弹性参数, 沥青砂, Burgers拟合, 动态剪切蠕变, 松弛模量

Abstract: To consider the complex mechanical behavior of asphalt mortar and provide the data surpport for asphalt mixture micromechanics analysis, several asphalt mixture mixing ratios were transferred into asphalt mortar mixing ratios. Asphalt mortar molding device and discovery hybrid rheometer fixtures developed by ourselves were used to obtain the dynamic shear creep curves. Burgers model was used to fit the creep curves. The viscoelastic parameters of asphalt mortar under dynamic shear loading condition were obtained. The changing rules of the viscoelastic parameters and the relaxation modulus were analyzed. Results showed that Burgers model had good fitting effect on dynamic shear creep curve of asphalt mortar. The creep deformation of SMA-16 corresponding asphalt mortar was larger than AC-20 within the same loading time. Rubber asphalt mortar had the optimal shear creep resistant properties. The asphalt mortar creep deformation had the same influence rules with the general influence rules of asphalt miture rutting deformation. Test temperature, asphalt contant, type of asphalt and aggregate gradation all had obviously influence on asphalt mortar dynamic shear creep viscoelastic parameters and relaxation modulus.

Key words: Burgers fitting, relaxation modulus, asphalt mortar, dynamic shear creep, viscoelastic parameters

中图分类号: 

  • U414
[1] 孙雅珍, 朱传江, 吴刚兵, 等.高粘弹沥青砂的粘弹模型参数研究[J].中外公路,2015,35(4):244-247. SUN Yazhen, ZHU Chuanjiang, WU Gangbing, et al. Viscoelastic model parameters of high viscoelastic asphalt mortar[J]. Journal of China & Foreign Highway, 2015, 35(4):244-247.
[2] 王聪, 郭乃胜, 赵颖华, 等. 基于CT技术和有限元方法的沥青混合料数值蠕变试验研究[J].大连海事大学学报, 2014,40(1):123-127. WANG Cong, GUO Naisheng, ZHAO Yinghua, et al. Numerical creep test of asphalt mixture based on X-ray computed topography and finite element method[J]. Journal of Dalian Maritime University, 2014, 40(1):123-127.
[3] DAI Qingli, YOU Zhanping. Prediction of creep stiffness of asphalt mixture with micromechanical finite-element and discrete-element models[J]. Canadian Metallurgical Quarterly, 2007, 133(2):163-173.
[4] DAI Qingli. Prediction of dynamic modulus and phase angle of stone-based composites using a micromechanical finite element approach[J]. Journal of Materials in Civil Engineering, 2010, 22(6):618-627.
[5] 吴俊.沥青混合料等效力热性质的细观力学研究[D].武汉:华中科技大学,2013. WU Jun. Micromechanical analysis of equivalent mechanical and thermal properties of asphalt mixture[D].Wuhan: Huazhong University of Science and Technology, 2013.
[6] 李董勋.弹石路沥青砂养护技术研究[J].云南交通科技,2001,17(1):37-38. LI Dongxun. Research on stone road maintenance using asphalt sand technology[J]. The Communication Science and Technology in Yunnan, 2001, 17(1):37-38.
[7] 姚占勇,韩杰,商庆森,等.碳纤维石墨到点沥青砂浆压敏性能研究[J].山东大学学报(工学版),2013,43(1):80-85. YAO Zhanyong, HAN Jie, SHANG Qingsen, et al. Research on pressure sensitivity of the conductive asphalt mortar with carbon fiber and graphite powders[J]. Journal of Shandong University(Engineering Science), 2013, 43(1):80-85.
[8] 唐智伦,禹淙,杨宏.橡胶沥青砂胶在混凝土桥面铺装中的应用[J].公路交通技术,2006(4):45-48. TANG Zhilun, YU Cong, YANG Hong. Application of rubber asphalt sand gel in concrete bridge deck laying[J]. Technology of Highway and Transport, 2006(4):45-48.
[9] 葛智,王昊,张堃,等.塑料砂浆的性能研究[J].山东大学学报(工学版), 2012,42(1):106-108. GE Zhi, WANG Hao, ZHANG Kun, et al. Investigation on the properties of plastic mortar[J]. Journal of Shandong University(Engineering Science), 2012, 42(1):106-108.
[10] 叶永,杨新华,陈传尧.沥青砂蠕变特性及力学模型研究[J].公路,2009(2):121-124. YE Yong, YANG Xinhua, CHEN Chuanyao. Research on creep behavior and mechanical model of asphalt sand[J]. Highway, 2009(2):121-124.
[11] 蔡宜洲,叶永.沥青砂粘弹特性实验研究[J].工程力学,2010,27(SⅠ):200-204. CAI Yizhou, YE Yong. Experimental researches on viscoelastic behavior of asphalt sand mixture[J]. Engineering Mechanics, 2010, 27(SⅠ):200-204.
[12] 蔡宜洲,叶永.沥青砂混合料粘弹塑力学特性研究[J].工程力学,2012,29(SⅡ):182-185. CAI Yizhou, YE Yong. Researches on viscoelastic mechnics behavior of asphalt sand mixture[J].Engineering Mechanics, 2012, 29(SⅡ):182-185.
[13] 郭金敏,杨国洲.基于粘弹性参数的沥青砂紫外光老化研究[J].公路工程,2014,39(3):83-89. GUO Jinmin, YANG Guozhou. Reaearch on ultraviolet aging of asphalt mastic based on viscoelastic parameters[J].Highway Engineering, 2014, 39(3):83-89.
[14] 李晓民, 张肖宁, 南雪丽. 改性沥青老化后动态粘弹力学行为研究[J]. 中外公路, 2006,26(3):269-272. LI Xiaomin, ZHANG Xiaoning, NAN Xueli. Dynamic viscoelastic mechanical behavior of modified asphalt after aging[J]. Journal of China & Foreign Highway, 2006, 26(3):269-272.
[15] 侯航舰,胡霞光.沥青玛蹄脂黏弹性特性静态蠕变试验研究[J].建筑材料学报,2008,11(3):292-298. HOU Hangjian, HU Xiaguang. Study on static creep test for viscoelastic property of asphalt mastic[J].Journal of Building Materials, 2008, 11(3):292-298.
[16] MITCHELL M R, LINK R E, MO L T, et al. Research of bituminous mortar fatigue test method based on dynamic shear rheometer[J]. Journal of Testing and Evaluation, 2012, 40(1):84-90.
[17] 张延双,周新星.基于动态剪切流变仪的沥青砂浆力学性能研究[J].建材世界,2015,36(1):17-19. ZHANG Yanshuang, ZHOU Xinxing. Mechnical properties of asphalt mortar based on dynamic shear rheometer[J].The World of Building Materials, 2015, 36(1):17-19.
[18] 姚占勇,张燕军.沥青混合料用纤维性能分析[J].山东大学学报(工学版),2008,38(4):69-74. YAO Zhanyong, ZHANG Yanjun. Performance analysis on the fibers of a bituminous concrete mixture[J]. Journal of Shandong University(Engineering Science), 2008, 38(4):69-74.
[19] 中华人民共和国交通运输部. 公路沥青路面施工技术规范:JTG F40—2004[S].北京:人民交通出版社,2004.
[20] 叶永, 杨新华, 陈传尧.沥青砂粘弹性模型参数的试验研究[J].中外公路,2009,29(4):192-195. YE Yong, YANG Xinhua, CHEN Chuanyao. Experimental study on viscoelastic parameters of asphalt mortar[J]. Journal of China & Foreign Highway, 2009, 29(4):192-195.
[21] 李晓军,江丽华.沥青砂浆粘弹特性试验与模型参数分析[J].武汉理工大学学报,2011,33(3):82-86. LI Xiaojun, JIANG Lihua.Test and model parameter analysis of asphaltic sand with viscoelasticity[J].Journal of Wuhan University of Technology, 2011, 33(3):82-86.
[22] 张肖宁. 沥青与沥青混合料的黏弹力学原理及应用[M].北京: 人民交通出版社,2006.
[23] DESHPANDE V S, CEBON D. Uniaxial experiments on idealized asphalt mixes[J]. Journal of Materials in Civil Engineering, 2000, 12(3):262-271.
[24] 杨大田,黄涛,夏文军,等.纤维沥青胶砂的抗剪试验研究[J].重庆交通大学学报(自然科学版),2008,27(4):589-593. YANG Datian, HUANG Tao, XIA Wenjun, et al. Study of the fiber asphalt sand by the shearing test[J].Journal of Chongqing Jiaotong University(Natural Science), 2008, 27(4):589-593.
[25] 叶永,杨新华,陈传尧.不同应力水平下沥青砂蠕变模型实验对比[J].华中科技大学学报(自然科学版),2009,37(3):116-118. YE Yong, YANG Xinhua, CHEN Chuanyao. Experimental comparision of creep models for asphalt sand at different levels of stresses[J]. Journal of Huazhong University of Science & Technology(Natural Science Edition), 2009, 37(3):116-118.
[1] 姚占勇,韩杰*,商庆森,葛智,张晓萌,崔衡. 碳纤维石墨导电沥青砂浆压敏性能研究[J]. 山东大学学报(工学版), 2013, 43(1): 80-85.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
[1] 邓修成,沈艳军,方胜乐 . 多输入-多输出线性系统有限时间观测器设计方法[J]. 山东大学学报(工学版), 2008, 38(4): 17 -21 .
[2] 刘义辉,李林,刘凯,孙杰. 高速列车车轴-轴承温度特性及弛缓机理[J]. 山东大学学报(工学版), 2016, 46(2): 116 -121 .
[3] 梁建毅1,李术才2,薛翊国2,王者超2,周毅2,平洋2. 地下储油库岩体水文地质分类及工程应用研究[J]. 山东大学学报(工学版), 2012, 42(6): 86 -92 .