交叉缠绕式柔性护栏端部锚固优化设计

doi:10.6040/j.issn.1672-3961.0.2015.322

摘要/Abstract

摘要： 为研究符合我国公路环境条件的交叉缠绕式柔性护栏端部锚固系统,结合我国公路环境并参考国外护栏端部锚固的设计,对锚固系统各部分外形及尺寸进行初步设计。运用ls-dyna软件建立锚固系统有限元碰撞分析模型,并结合实车试验方法与有限元仿真试验方法,得到锚固系统的外载荷及可靠的钢丝绳有限元模型。利用正交试验方法,对初始的锚固系统尺寸进行优化设计,通过极差和方差分析得到锚固系统的最优尺寸组合,对最优结果进行验证分析。结果表明,该锚固系统在受载情况下无任何拔出与倾斜,其土壤最大应力为8.2×10^-3MPa,远小于其许用应力1.7×10^-1MPa,能很好地满足各项评价指标。

关键词: 碰撞分析, 正交试验, 端部锚固系统, 交叉缠绕式柔性护栏, 有限元

Abstract: In order to research the cross type flexible barrier end anchorage system which conformed to Chinese highway environmental conditions, each part of anchorage system's shape and size was designed according to Chinese actual road environment and referred to foreign guardrail end anchor. Anchorage system model was established using ls-dyna finite element software, the external load of anchorage system and reliable finite element model of wire rope was got combined with real vehicle test and finite element simulation. The initial size of anchorage system was optimized using orthogonal test method. Optimal size was got thorough range and variance analysis. And it was validated through simulation test. The result showed that anchorage system was not pulled out and tilted under external load. The maximum stress of soil was 8.2×10^-3MPa, far less than the allowable stress which was 1.7×10^-1MPa. Thus, this anchorage system could meet the evaluation index well according to above mentioned.

Key words: collision analysis, orthogonal, cross-wound cable barrier, finite element, anchoring ends

中图分类号:

U491.5+9

雷正保,廖卓,刘助春. 交叉缠绕式柔性护栏端部锚固优化设计[J]. 山东大学学报(工学版), 2016, 46(3): 93-98.

LEI Zhengbao, LIAO Zhuo, LIU Zhuchun. Optimized design of cross-wound cable barrier end anchorage[J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2016, 46(3): 93-98.

参考文献

[1] 雷正保, 唐波, 刘兰, 等. 车-路-护栏系统的碰撞安全性[M]. 长沙: 国防科技大学出版社, 2009.
[2] 雷正保, 谢玉洪, 李海霞. 大变形结构的耐撞性[M]. 长沙: 国防科技大学出版社, 2008.
[3] 雷正保. 汽车覆盖件冲压成形CAE技术[M]. 长沙: 国防科技大学出版社, 2003.
[4] 雷正保, 宁寒.新型柔性护栏端头结构的拓扑优化[J]. 山东大学学报(工学版), 2015,45(5):19-23. LEl Zhengbao, NING Han. Topology optimization new flexible structure guardrail ends[J]. Journal of Shandong University(Engineering Science), 2015, 45(5):19-23.
[5] LEI Zhengbao, CHENG Hailiang. The analysis and test of medium truck collision safety verification[C] // Proceedings of Chinese Automotive Safety Technology 2013. Hangzhou, China: Zhejiang University Press, 2013:223-227.
[6] ROSS H E. Recommended Procedures for the Safety Performance Evaluation of Highway Features, NCHRP Report 350[R].Washington DC, USA: Transportation Research Board, 1993.
[7] ZHU Ling, ROHDE John R. Development of guidelines for anchor design for high tension cable guardrails[J]. Transportation Research Record, 2010, 2195(12):115-120.
[8] 段建. 边坡框架锚杆锚固系统力学行为及特性研究[D].兰州: 兰州大学, 2014. DUAN Jian. Study on mechanical behaviors and characteristics of slope anchorage system with frame supporting structure[D]. Lanzhou: Lanzhou University, 2014.
[9] 刘立顺. 端锚预应力锚杆支护技术研究[D]. 长沙: 中南大学, 2011. LIU Lishun. Research on end anchoring grouting prestressed anchor support technology[D]. Changsha: Central South University, 2011.
[10] 刘雯, 宋绪丁, 赵岩. 斜拉桥索梁锚固区受力有限元分析及其优化设计[J]. 交通科技, 2013(1): 4-6. LIU Wen, SONG Xuding, ZHAO Yan. Cable-stayed bridge load-bearing beam finite element analysis and optimization design[J]. Transportation Science and Technology, 2013(1):4-6.
[11] 范宇洁, 郑七振, 魏林. 预应力锚索锚固体的破坏机理和极限承载能力研究[J]. 岩石力学与工程学报, 2005, 24(15):2765-2769. FAN Yujie, ZHENG Qizhen, WEI Lin. Research on failure mechanism and ultimate load carrying capacity of prestressed cable[J]. Chinese Journal of Rock Mechanics and Engineering, 2005, 24(15):2765-2769.
[12] MARBLE FALLS. Gibraltar Cable Barrier Systems: USA, 7364137[P]. 2012-08-22.
[13] 中华人民共和国交通运输部. JPG/T F83-01-2013高速公路护栏安全性能评价指标[S].北京:人民交通出版社, 2013.
[14] 雷正保, 李丽红, 雷沐羲. 新型柔性护栏碰撞安全性仿真分析及实车验证[J]. 振动与冲击, 2013, 32(22):28-31. LEl Zhengbao, Ll Lihong, LEl Muxi. Model analysis of flexible guardrail collision safety simulation and real vehicle test[J]. Journal of Vibration and Shock, 2013, 32(22):28-31.
[15] 闫书明. 有限元仿真方法评价护栏安全性能的可行性[J]. 振动与冲击, 2011, 30(1): 152-156. YAN Shuming. Feasibility analysis of barrier safety evaluation with finite element simulation method[J]. Journal of Vibration and Shock, 2011, 30(1):152-156.
[16] 雷正保, 孙祯祥. Am级中央分隔带柔性护栏耐撞性拓扑优化设计[J]. 长沙理工大学学报, 2015, 12(1): 29-34. LEl Zhengbao, SUN Zhenxiang. Crashbwo-rthiness topology optimization design of am class median strip cable barrier[J]. Journal of Changsha University of science and technology, 2015, 12(1):29-34.
[17] 雷正保, 王瑞. 大客车碰撞新型柔性护栏的碰撞速度响应[J]. 工程科学, 2014(1):37-42. LEl Zhengbao, WAND Rui. The response of collision speed caused by the large bus to new flexible barrier [J]. Engineering Sciences, 2014(1):37-42.
[18] 刘瑞江, 张业旺, 闻崇炜. 正交试验设计和分析方法研究[J]. 实验技术与管理, 2010(9):52-55. LlU Ruijiang, ZHANU Yewang, WEN Chongwei. Orthogonal experimental design and analysis methods study[J]. Experimental Technology and Management, 2010(9):52-55.
[19] 马希文. 正交设计的数学理论[M]. 北京: 人民教育出社, 1981.
[20] 方开泰, 马长兴,李长坤. 正交设计的最新发展和应用[J]. 数理统计与管理, 1999, 18(2):44-49. FANG Kaitai, MA Changxing, Ll Changkun. The latest developments in the design and application of pay[J]. Applied of Statistics and Management, 1999, 18(2):44-49.

相关文章 15

[1]	李连祥,车秀熙,李未龙,邱叶凡,张尚儒,汪楚涵. 深基坑永久支护RECV桩工作机理与计算分析[J]. 山东大学学报 (工学版), 2025, 55(6): 108-119.
[2]	李旭,杨斌,刘昌斌,牛军川. 全柔性隔振系统的有限元功率流可视化研究[J]. 山东大学学报 (工学版), 2024, 54(6): 176-181.
[3]	樊禹江,丁佳雄,黄欢欢,廖凯,许锦宝. 一种新型装配式混凝土剪力墙等效平面桁架模型[J]. 山东大学学报 (工学版), 2024, 54(3): 94-102.
[4]	罗靓,晏宇翔,吕辉,张成明. 异形钢管混凝土轴压短柱力学性能[J]. 山东大学学报 (工学版), 2024, 54(3): 103-114.
[5]	扈萍,李萌,滕越,马少坤, 张西文. 考虑主应力偏转影响的基坑开挖应力路径[J]. 山东大学学报 (工学版), 2023, 53(6): 100-107.
[6]	曹卫东,任宪富,娄术荣,张同国,侯宗良,张吉哲. 纤维增强型桥面防水层优化设计与性能[J]. 山东大学学报 (工学版), 2023, 53(3): 96-103.
[7]	王旭昊,刘倩倩,李虎成,李程,李鹏,凌一峰. 装配式水泥混凝土路面板空心形式研究与优化[J]. 山东大学学报 (工学版), 2022, 52(4): 139-150.
[8]	耿麒,张俊杰,汪珂,路宇峰,谢立扬,叶敏. 基于FEM-SPH耦合的TBM滚刀切削仿真与试验研究[J]. 山东大学学报 (工学版), 2022, 52(1): 93-102.
[9]	宋修广, 杨鹤, 陈晓燕, 崔文杰, 岳红亚, 张恺, 田隽. 砂土中浅埋竖向锚定板极限承载力[J]. 山东大学学报 (工学版), 2021, 51(1): 24-31.
[10]	韩家桢,王勇,谢玉东,王启先,张新标,高文彬,李荣兰,张传军. 深海带电插拔连接器力学特性分析[J]. 山东大学学报 (工学版), 2020, 50(6): 30-39.
[11]	林超,张程林,王勇. 预应力中空棒构件设计与力学特性[J]. 山东大学学报 (工学版), 2020, 50(5): 26-32.
[12]	王晓光,何壮,李显富,潘奥. 磁悬浮旋翼驱动磁场对支承磁场的影响[J]. 山东大学学报 (工学版), 2019, 49(4): 86-92.
[13]	董旭,郭剑,周海灿,邓振全,李树忱. 轨道交通U形梁底板横向抗裂及预应力布置研究[J]. 山东大学学报 (工学版), 2019, 49(4): 44-50.
[14]	王龙林,胡训栋,祁金胜,安春国,王湛. 多载荷作用下内压对烟风道安全性的影响[J]. 山东大学学报 (工学版), 2018, 48(6): 116-121.
[15]	陈瑞,李红伟,田靖. 磁极数对径向磁轴承承载力的影响[J]. 山东大学学报(工学版), 2018, 48(2): 81-85.

多维度评价

Viewed

Full text

Abstract

Cited

Shared

Discussed