Journal of Shandong University(Engineering Science) ›› 2022, Vol. 52 ›› Issue (3): 100-108.doi: 10.6040/j.issn.1672-3961.0.2021.560
LIU Fangchen1, SHI Yan1, LI Yuanlu1, WANG Zhan1, DU Wenjing1, JI Wanxiang2*
CLC Number:
[1] FINNIE I. Erosion of surfaces by solid particles[J]. Wear, 1960, 3(2):87-103. [2] FINNIE I. Some observations on the erosion of ductile metals[J]. Wear, 1972, 19(1):81-90. [3] BAUVER W, BIANCA J, FISHBURN J, et al. Characterization of erosion of heat transfer tubes in coal fired power plants[J]. American Society of Mechanical Engineers, 1984, 84(3): 840-905. [4] OKA Y I, OKAMURA K, YSOHIDA T. Practical estimation of erosion damage caused by solid particle impact[J]. Wear, 2005, 259(1):95-101. [5] OKA Y I,OKAMURA K, YOSHIDA T. Practical estimation of erosion damage caused by solid particle impact: Part 2: mechanical properties of materials directly associated with erosion damage[J]. Wear, 2005, 259(1):102-109. [6] PARSIM, NAJMI K, NAJAFIFARD F, et al. A comprehensive review of solid particle erosion modeling for oil and gas wells and pipelines applications[J]. Journal of Natural Gas Science & Engineering, 2014, 21:850-873. [7] RAASK E. Tube erosion by ash impaction[J]. Wear, 1969, 13(4):301-315. [8] LEE B E, FLETCHER C, BEHNIA M. Computational study of solid particle erosion for a single tube in cross flow[J]. Wear, 2000, 240(1,2):95-99. [9] LEE B E, TU J Y, FLERCHER C. On numerical modeling of particle-wall impaction in relation to erosion prediction: Eulerian versus Lagrangian method[J]. Wear, 2002, 252(3,4):179-188. [10] FAN J, ZHOU D, JIN J, et al. Numerical simulation of tube erosion by particle impaction[J]. Wear, 1991, 142(1):171-184. [11] 袁宝强. 基于气固两相流的受热面磨损与沉积特性研究[D]. 济南: 山东大学, 2018. YUAN Baoqiang. Study on wear and deposition characteristics of heating surface based on gas-solid two-phase flow[D]. Jinan: Shandong University, 2018. [12] JIN T, LUO K, WU F, et al. Numerical investigation of erosion on a staggered tube bank by particle laden flows with immersed boundary method[J]. Applied Thermal Engineering, 2014, 62(2):444-454. [13] WANG Z L, FAN J R. Numerical study of solid particle erosion on the tubes near the side walls in a duct with flow past an aligned tube bank[J]. Aiche Journal, 2010, 56(1):66-78. [14] 解其林,陈昊,郭万军.电厂换热管束冲蚀磨损数值模拟分析[J].机电工程技术,2021,50(8):188-191. XIE Qilin, CHEN Hao, GUO Wanjun. Numerical simulation analysis of erosion wear of heat exchange tube bundle in power plant[J]. Mechanical and Electrical Engineering Technology, 2021, 50(8):188-191. [15] 阎维平, 马凯, 高正阳, 等. 增压富氧燃煤锅炉省煤器管束磨损研究[J].西安交通大学学报, 2013, 47(3):53-59. YAN Weiping, MA Kai, GAO Zhengyang, et al. Study on tube bundle wear of economizer in pressurized oxygen-rich coal-fired boiler[J]. Journal of Xi'an Jiaotong University, 2013, 47(3):53-59. [16] 黄凯. 燃煤电厂烟气冷却器冲蚀磨损与中间媒介型烟气换热器优化研究[D].杭州:浙江大学,2020. HUANG Kai. Study on erosion wear of flue gas cooler and optimization of Intermediate medium flue gas heat exchanger in coal-fired power plant[D]. Hangzhou: Zhejiang University, 2020. [17] JIN Y, TANG G H, HE Y L, et al. Numerical study of the solid particle erosion on H-type finned circular/elliptic tube surface[J]. Communications in Computa-tional Physics, 2017, 21(2):466-489. [18] 王皓轩. 新型省煤器管束磨损与积灰特性的数值研究[D].北京:华北电力大学,2018. WANG Haoxuan. Numerical study on wear and Ash accumulation characteristics of tube bundle of new economizer[D]. Beijing: North China Electric Power University, 2018. [19] MORSI S A, ALEXANDER A J. An investigation of particle trajectories in two-phase flow systems[J]. Journal of Fluid Mechanics, 1972, 55(2): 193-208. [20] FAN J, ZHOU D, JIN J, et al. Numerical simulation of tube erosion by particle impaction[J]. Wear, 1991, 142(1):171-184. [21] DAVIS D O, GESSNER F B. Experimental investigation of turbulent flow through a circular-to-rectangular transition duct[J]. American Institute of Aeronautics and Astronautics Journal, 1992, 30(2): 367-375. |
No related articles found! |
|