JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE) ›› 2018, Vol. 48 ›› Issue (2): 94-99.doi: 10.6040/j.issn.1672-3961.0.2017.615

Previous Articles     Next Articles

Influence of interference fit on the dynamic characteristics of magnetic levitation rotors

LI Peng1,2, WU Huachun1,2*, CUI Ruifang1,2, XIONG Zhenyu1,2   

  1. 1. School of Mechanical and Electronic Engineering, Wuhan University of Technology, Wuhan 430070, Hubei, China;
    2. Hubei Provincial Engineering Technology Research Center for Magnetic Suspension, Wuhan 430070, Hubei, China
  • Received:2017-12-15 Online:2018-04-20 Published:2017-12-15

PDF (PC)

554

Abstract: According to the too simple model and the large error problem of modal analysis for traditional magnetic levitation rotors, the contact effect between the rotors was considered. The contact finite element method was used to establish the finite element model of the interference fit of the magnetic levitation rotors. With the combination of theory and static analysis, normal stiffness factor was optimized. By modifying the friction coefficient, the relationship between the interference coefficient and the friction coefficient was obtained, which could provide reference for the similar rotors' accurately analysis of modal. A comparative analysis was made on whether the contact effect was considered for the magnetic levitation rotor. The results showed that it could make the model and the solution more accurate to consider the contact effect.

Key words: magnetic levitation rotor, interference fit, contact effect, static analysis, modal analysis

CLC Number: 

  • TH113
[1] 黄梓嫄, 韩邦成, 周银锋. 非线性接触下磁悬浮电机柔性转子系统模态分析[J]. 中国电机工程学报, 2014, 34(15):2438-2444. HUANG Ziyuan, HAN Bangcheng, ZHOU Yinfeng. Modal analysis of the flexible rotor system of magnetic levitation motors under nonlinear contact[J]. Proceedings of the Csee, 2014, 34(15):2438-2444.
[2] 龙亚文, 谢振宇, 徐欣. 磁悬浮轴承H∞鲁棒控制策略研究[J]. 振动与冲击, 2013, 32(23):115-120. LONG Yawen, XIE Zhenyu, XU Xin. H∞ robust control strategy for an active magnetic bearing[J]. Journal of Vibration & Shock, 2013, 32(23):115-120.
[3] 张秀华. 高速储能飞轮转子的过盈配合分析[J]. 煤矿机械, 2012, 33(10):150-152. ZHANG Xiuhua. Analysis of interference fit of high-speed energy storing flywheel rotor[J]. Coal Mine Machinery, 2012, 33(10):150-152.
[4] 王林军,曹慧萍. 基于ANSYS-Workbench的转子模态分析[J]. 三峡大学学报(自然科学版),2014,36(6):89-93. WANG Linjun, CAO Huiping. Modal analysis of rotor based on ANSYS-Workbench[J]. Journal of China Three Gorges University(Natural Sciences), 2014, 36(6):89-93.
[5] 刘君,袁建平. 带预应力的高速离心泵转子模态分析[J]. 中国农村水利电,2014,32(2):117-121. LIU Jun, YUAN Jianping. A modal analysis of the rotor of high-speed centrifugal pumps with prestress[J]. China Rural Water & Hydropower, 2014, 32(2):117-121.
[6] 刘正锐, 黄勤, 宋祎平. 微型电机转子的过盈配合分析[J]. 煤矿机械, 2011, 32(5):100-101. LIU Zhengrui, HUANG Qin, SONG Yiping. Interference fits analysis of micro motor rotor[J]. Coal Mine Machinery, 2011, 32(5):100-101.
[7] 万俟昊天, 向阳, 夏雪宝,等. 过盈配合面的接触刚度和接触阻尼计算研究[J]. 船海工程, 2013, 42(3):85-90. MOQI Haotian, XIANG Yang, XIA Xuebao, et al. Research on calculation of contact stiffness and contact damping of interference-fit interface[J]. Ship & Ocean Engineering, 2013, 42(3):85-90.
[8] 张建水, 殷玉枫, 赵肖敏,等. 基于ANSYS的轴套过盈配合接触分析[J]. 机械设计, 2014,31(5):21-25. ZHANG Jianshui, YIN Yufeng, ZHAO Xiaomin, et al. Contact analysis of interference fit between shaft and shaft sleeve based on ANSYS[J]. Journal of Machine Design, 2014, 31(5):21-25.
[9] 寇海江, 袁惠群, 李岩,等. 一体化转子系统动力分析的预应力模态综合法[J]. 东北大学学报(自然科学版), 2014, 35(2):263-267. KOU Haijiang, YUAN Huiqun, LI Yan, et al. A prestressed component mode synthesis method for dynamics analysis of blisk-shaft integrated rotor[J]. Journal of Northeastern University(Natural Science), 2014, 35(2): 263-267.
[10] 安吉阁, 李建宾, 廖熠. 基于ANSYS转子曲轴过盈配合有限元分析[J]. 机械工程师, 2010,32(11):119-120. AN Jige, LI Jianbin, LIAO Yi. Finite element analysis of interference joint of rotor and crankshaft based on ANSYS[J]. Mechanical Engineer, 2010, 32(11):119-120.
[11] 李小彭, 赵光辉, 杨皓天,等. 考虑结合面影响的组合梁非线性预应力模态分析[J]. 振动与冲击, 2014, 33(4):17-21. LI Xiaopeng, ZHAO Guanghui, YANG Haotian, et al. Nonlinear prestressed modal analysis for a composite beam considering influence of joint surface[J]. Journal of Vibration & Shock, 2014, 33(4):17-21.
[12] CHEN S Y. The dynamic analyses and verifications of a hollowshaft with hot-fit component using 3d finite contact element[J]. Transactions-Canadian Society for Mechanical Engineering, 2013, 37(1):21-38.
[13] CHEN S Y, KUNG C, LIAO T T, et al. Dynamic effects of the interference fit of motor rotor on the stiffness of a high speed rotating shaft[J].Transactions-Canadian Society for Mechanical Engineering, 2014, 34(34):243-261.
[14] 李红伟,于文涛,刘淑琴. 基于ANSYS的磁悬浮挠性转子模态分析与设计[J]. 中国机械程,2014,25(11):1447-1452+1459. LI Hongwei, YU Wentao, LIU Shuqin. Mode analysis and design of maglev flexible rotor with ANSYS[J]. China Mechanical Engineering, 2014, 25(11): 1447-1452+1459.
[15] CHEN S Y, KUNG C, HSU J C. Dynamic analysis of a rotary hollow shaft with hot-fit part using contact elements with friction[J]. Transactions-Canadian Society for Mechanical Engineering, 2011, 35(3):461-474.
[16] CHEN S Y. An equivalent direct modeling of a rotary shaft with hot-fit components using contact element modal analysis results[J]. Computers & Mathematics with Applications, 2012, 64(5):1093-1099.
[17] 丁鸿昌, 肖林京, 张华宇,等. 高速永磁电机转子护套过盈配合量计算及应力分析[J]. 机械设计与研究, 2011, 27(5):95-98. DING Hongchang, XIAO Linjing, ZHANG Huayu, et al. Interference fit calculation and stress analysis for rotor sleeve of high-speed permanent magnet electric machine[J]. Machine Design & Research, 2011, 27(5):95-98.
[18] 同剑, 原大宁, 刘宏昭,等. 电主轴与其内装转子过盈配合的可靠性分析[J]. 机械科学与技术, 2013, 32(6):845-852. TONG Jian, YUAN Daning, LIU Hongzhao, et al. The reliability analysis of motorized spindle and motor rotor with interference fit[J]. Mechanical Science & Technology for Aerospace Engineering, 2013, 32(6):845-852.
[19] 史忠震, 张卫, 陈强,等. 高速微型永磁电机转子护套过盈配合的计算与分析[J]. 微特电机, 2014, 42(4):35-37. SHI Zhongzhen, ZHANG Wei, CHEN Qiang, et al. Interference fit calculation and analysis for rotor sleeve of high-speed micro permanent magnet electric motor[J]. Small & Special Electrical Machines, 2014, 42(4):35-37.
[20] 王伟, 尤磊. 电机转子过盈配合分析计算[J]. 湖南农机:学术版, 2013, 40(1):37-38. WANG Wei, YOU Lei. Analysis on interference fit of rotation of electrical motor rotor[J]. Hunan Agricultural Machinery, 2013, 40(1):37-38.
[21] 郭铁能, 马小超, 谷昀超,等. 轴承过盈配合量对主轴动力学特性的影响[J]. 北京工业大学学报, 2016, 42(1):51-59. GUO Tieneng, MA Xiaochao, GU Yunchao, et al. Effect of the interference fit amount impact on the dynamic characteristics of spindle[J]. Journal of Beijing University of Technology, 2016, 42(1):51-59.
[22] 凌桂龙. ANSYS Workbench 15.0从入门到精通[M]. 北京:清华大学出版社, 2014.325-350.
[23] 高长银, 李万全, 刘丽. ANSYS Workbench 14.5建模与仿真从入门到精通[M]. 北京:电子工业出版社, 2014:351-359.
[1] LI Jian-ming, WANG Han-peng*, LI Shu-cai, ZHANG Qing-he. Design and optimization of the counterforce frame for sleeper and roadbed fatigue testing machine [J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2013, 43(5): 80-86.
[2] JIANG Bo1, TIAN Mao-cheng2*, HAO Wei-dong1, LIU Fu-guo1. Experiment and numerical simulation on inherent vibration charact eristics of the new elastic tube bundle [J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2012, 42(4): 132-136.
[3] XU Hao, WEI Shou-shui*, ZHANG Jing-tao. Simulation and analysis of a new micro-fluidic active mixer [J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2010, 40(3): 57-60.
[4] ZHENG Ji-zhou,CHENG Lin,DU Wen-jing . Modal analysis of liquid-filled elastic tube bundles [J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2007, 37(4): 55-59 .
[5] , . Modal Analysis of Liquid-Filled Elastic Tube Bundles [J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2007, 37(4): 0-0 .
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed   
No Suggested Reading articles found!
Copyright 2018 © Editorial office of Journal of Shandong University (Engineering Science)
Supported by Beijing Magtech Co.Ltd