JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE) ›› 2018, Vol. 48 ›› Issue (1): 117-123.doi: 10.6040/j.issn.1672-3961.0.2016.294

Previous Articles     Next Articles

A traveling wave fault location method for T-type transmission line based on combined traveling wave principle

SHAO Jian1, WEI Peiyu1, CHEN Ping1, LIANG Fengqiang2, MENG Chao3   

  1. 1. College of Electrical and Electronic Engineering, Shandong University of Technology, Zibo 255049, Shandong, China;
    2. Linyi Power Supply Company, Linyi 276003, Shandong, China;
    3. Linyi Zhengxin Engineering Survey and Design Co., Ltd, Linyi 276005, Shandong, China
  • Received:2016-07-28 Online:2018-02-20 Published:2016-07-28

PDF (PC)

423

Abstract: In order to solve the fault location problem of T-type transmission line, combined with the propagation characteristics of fault traveling wave in transmission line with T-type branch, a combined traveling wave ranging method of T transmission line was proposed. A traveling wave fault location method for T-type transmission line based on combined traveling wave principle was proposed. The theory of double end range was used to judge fault interval. The single-ended range principle was used to get the fault distance Compared with that the traditional T-type transmission line fault location method was mainly suitable for overhead line, the proposed method not only could be used for hybrid transmission lines, but also improve the ranging accuracy. The PSCAD simulation results showed the effectiveness and practicability of this method, which could improve the ranging accuracy and provide accurate and reliable distance measuring results.

Key words: hybrid transmission lines, combined traveling wave, PSCAD simulation, T branch

CLC Number: 

  • TM77
[1] 宋珂. 基于行波的多端电缆故障定位研究[D]. 济南:山东大学, 2014. SONG Ke. Studies on traveling wave based fault location for Multi-Terminal cable system[D]. Jinan:Shandong University, 2014.
[2] 马草原. 配电网故障定位技术的研究[D]. 济南:山东大学, 2014. MA Caoyuan. Research on fault location technology for distribution network[D]. Jinan:Shandong University, 2014.
[3] 韩铭雪, 胡希同, 梁凤强, 等. T型输电线路组合行波测距方法[J]. 电测与仪表, 2016, 53(2):67-72. HAN Mingxue, HU Xitong, LIANG Fengqiang, et al. Combined traveling wave fault location method for T transmission line[J]. Electrical Measurement & Instrumentation, 2016, 53(2): 67-72.
[4] 周大敏. 一种实用的三端高压输电线路故障测距方法[J]. 电力自动化设备, 1998, 18(1): 17-20. ZHOU Damin. A practical approach to accurate fault location on 3-terminal power system[J]. Electric Power Automation Equipment, 1998, 18(1): 17-20.
[5] 韦钢, 唐斌, 肖鸿杰. 输电线路不对称故障点定位的新方法[J]. 电力系统自动化, 2001, 25(9): 29-32. WEI Gang, TANG Bin, XIAO Hongjie. New location method of unbalance faults on transmission lines[J]. Automation of Electric Power Systems, 2001, 25(9): 29-32.
[6] 束洪春, 高峰, 陈学允, 等. T型输电系统故障测距算法研究[J]. 中国电机工程学报, 1998, 18(6): 416-420. SHU Hongchun, GAO Feng, CHEN Xueyun, et al. A study on accurate fault location algorithm of EHV T-connect to three terminals[J]. Proceedings of the CSEE, 1998, 18(6): 416-420.
[7] 蒋涛, 陆于平. 不受波速影响的输电线路单端行波故障测距研究[J]. 电力自动化设备, 2004, 24(12): 29-32. JIANG Tao, LU Yuping. Study of fault locating based on single terminal traveling waves avoiding wave speed influence[J]. Electric Power Automation Equipment, 2004, 22(12): 29-32.
[8] 尹晓光, 宋琳琳, 尤志, 等. 与波速无关的输电线路双 端行波故障测距研究[J]. 电力系统保护与控制, 2011, 39(1): 35-39. YIN Xiaoguang, SONG Linlin, YOU Zhi, et al. Study of fault locating for transmission line double terminal traveling waves unrelated to wave speed[J]. Proceedings of the CSEE, 2011, 31(1): 35-39.
[9] 李传兵, 陈平,谭博学, 等. 基于D型行波原理的T接线路故障测距方法[J]. 电力系统保护与控制, 2013, 41(18): 78-82. LI Chuanbing, Chenping, TAN Boxue, et al. A fault location method for T-connection lines based on D-type traveling wave theory[J].Power System Protection and Control, 2013, 41(18): 78-82.
[10] 辛超山, 李凤婷, 贾言争. 基于单端电气量行波测距方法改进[J]. 电测与仪表, 2013, 50(11): 54-58. XIN Chaoshan, LI Fengting, JIA Yanzheng. Traveling wave method based on improved single-ended electrical quantities[J]. Electrical Measurement & Instrumentation, 2013, 50(11): 54-58.
[11] 张利, 张峰,梁军, 等. 带T型分支输电线路的单端行波故障测距[J]. 电力自动化设备, 2010, 30(4): 46-50. ZHANG Li, ZHANG Feng, LIANG Jun, et al. Fault locating based on single-end traveling waves for T-type transmission lines[J]. Electric Power Automation Equipment, 2010, 30(4): 46-50.
[12] 宋英涛. 500 kV输电线路故障定位与故障综合分析[D]. 济南:山东大学, 2015. SONG Yingtao. Fault location and fault comprehensive analysis for 500 kV transmission lines[D]. Jinan:Shandong University, 2015.
[13] LIANG Ji, BOOTH C, DYSKO A, et al. Improved fault location through anaylsis of system parameters during autoreclose operations on transmission lines[J]. IEEE Trans on Power Delivery, 2014, 29(6): 2430-2438.
[14] 陈学伟. 500 kV输电线路精确故障定位技术研究[D]. 济南:山东大学, 2013. CHEN Xuewei. Research on accurate fault location technology for 500kV transmission lines[D]. Jinan:Shandong University, 2013.
[15] 张峰, 梁军, 杜涛, 等. T型线路的行波精确故障测距新方法[J]. 高电压技术, 2012, 35(9): 527-532. ZHANG Feng, LIANG Jun, DU Tao, et al. Accurate fault location algorithm based on traveling waves for teed circuits[J]. High Voltage Engineering, 2012, 35(9): 527-532.
[16] 卢毅, 韩志锟, 汪燚春, 等. T型输电线路行波故障测距的改进算法[J]. 电力系统保护与控制, 2011, 39(5): 17-21. LU Yi, HAN Zhikun, WANG Yichun, et al. Improved fault location algorithm based on traveling waves for teed-circuits[J]. Power System Protection and Control, 2011, 39(5): 17-21.
[17] 施世鸿, 何奔腾, 张武军. T型高压输电线路故障测距[J]. 中国电机工程学报, 2011, 31(13): 105-110. SHI Shihong, HE Benteng, ZHANG Wujun. Fault location for HV three-terminal transmission lines[J]. Proceedings of the CSEE, 2011, 31(13): 105-110.
[18] ASGARIFAR S, HAGH M T, HOSSEINI M M. A novel fault location algorithm for double fed distribution networks[C] //Power Enginnering and Automation Conference(PEAM), 2011. Wuhan, China: IEEE, 2011: 327-330.
[19] 施世鸿, 何奔腾. T型输电线路非同步数据故障测距新算法[J]. 电力自动化设备, 2008, 28(10): 63-67. SHI Shihong, HE Benteng. Fault locating algorithm for T-type transmission lines with asynchronous sampling[J]. Electric Power Automation Equipment, 2008, 28(10): 63-67.
[20] 张峰. 输电线路行波故障测距优化算法研究[D]. 济南:山东大学, 2010. ZHANG Feng. Optimization algorithms for fault location based on travelling waves[D]. Jinan:Shandong University, 2010.
[21] 龚庆武, 王志梅, 雷庆生, 等. T型接线的一种新型精确故障定位算法的研究[J]. 继电器, 1999, 27(3): 20-22. GONG Qingwu, WANG Zhimei, LEI Qingsheng, et al. The study on a new accurate fault location algorithm for teed transmission line using three-terminal signals[J]. Relay, 1999, 27(3): 20-22.
[22] 高厚磊, 安艳秋, 江世芳. 超高压T接线路高精度故障测距算法研究[J]. 电力系统自动化, 2001, 25(20): 51-54. GAO Houlei, AN Yanqiu, JIANG Shifang. Study on accurate fault location algorithm for EHV teed lines[J]. Automation of Electric Power Systems, 2001, 25(20): 51-54.
[23] 郭亮, 吕飞鹏. T型线路的行波测距原理与算法[J]. 电力系统保护与控制, 2010, 38(23): 64-67, 74. GUO Liang, LYU Feipeng. Fault location algorithm based on wavelet transform for T-connection transmission lines[J]. Power System Protection and Control, 2010, 38(23): 64-67, 74.
[24] 田羽, 范春菊, 龚震东, 等. 同杆双回线反序电流特点及其在T形线路测距中的应用[J]. 电力系统自动化, 2007, 31(3): 67-71. TIAN Yu, FAN Chunju, GONG Zhendong, et al. A faulted line selection method of parallel transmission teed line on the basis of differential current[J]. Automation of Electric Power Systems, 2007, 31(3): 67-71.
[1] ZHENG Maoran, YU Jiang, CHEN Hongshan, ZHANG Shiyu, CHENG Haoyuan, GAO Honghui, ZHANG Jingwei. Construction of index system for relay protection operation evaluation based on KPI [J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2017, 47(6): 13-19.
[2] LIU Ying-liang,GONG Jun-xiang,WEI Guo-dong,MENG Ling-jun,ZHANG Jie .

Analysis and improvement of the‘S injection’fault feeder detection method

[J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2007, 37(4): 64-67 .
[3] JI Tao,SUN Tong-jing,XU Bing-yin,SUN Bo . Integrated methods to detect earth fault in DC systems [J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2006, 36(1): 55-59 .
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed   
No Suggested Reading articles found!
Copyright 2018 © Editorial office of Journal of Shandong University (Engineering Science)
Supported by Beijing Magtech Co.Ltd