JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE) ›› 2016, Vol. 46 ›› Issue (3): 112-116.doi: 10.6040/j.issn.1672-3961.0.2015.282

Previous Articles     Next Articles

A method of reducing the slip in radial direction of the traveling wave type rotary ultrasonic motor

JI Yuebo, WU Wangxian   

  1. College of Mechanical and Energy Engineering, Jimei University, Xiamen 361021, Fujian, China
  • Received:2015-08-24 Online:2016-06-30 Published:2015-08-24

Abstract: In order to reduce the slip in radial direction of the traveling wave type rotary ultrasonic motor(TRUM), a method of increasing the maximum of shear deformation of friction layer of rotor was put forward to achieve the purpose of reducing the slip in radial direction of TRUM. The factors which affect the radial maximum angle of shear deformation of the friction layer were got based on the principle of stick-slip of the contact area between the stator and the rotor in TRUM. The motors three-dimensional finite element contact model was built and simulation analysis was conducted with finite element software ANSYS10.0. The analysis results showed that the value of coefficient of friction and the value of poissons ratio of the friction layer material could be increased to reduce the slip in radial direction of TRUM. And the influence of the variation of poissons ratio was more noticeable than that of coefficient of friction on reducing the slip in radial direction of TRUM.

Key words: finite element simulation, shear deformation angle, radial slip, ultrasonic motor, friction layer

CLC Number: 

  • TM359.9
[1] 罗辞勇,卢斌,张帆,等.超声波电机发展现状及应用[J].微特电机,2011(11):70-74. LUO Ciyong, LU Bin, ZHANG Fan, et al.Development and application of ultrasonic motor[J].Small & Special Electrical Machines, 2011(11):70-74.
[2] LIONEL P, PAUL G.Industrial design of a centimetric “TWILA”ultrasonic motor[J].Sensors and Actuators A: Physical, 2005, 120(1):211-224.
[3] 赵淳生.21世纪超声电机技术展望[J].振动、测试与诊断,2000,20(1):7-12. ZHAO Chunsheng.The technology of ultrasonic motor in 21st century[J].Journal of Vibration, Measurement & Diagnosis, 2000, 20(1):7-12.
[4] 赵淳生.超声电机在南京航空航天大学的研究与发展[J].振动、测试与诊断,2005,25(3):167-173. ZHAO Chunsheng.Ultrasonic motor research and development in Nanjing university of aeronautics and astronautics[J].Journal of Vibration, Measurement & Diagnosis, 2005, 25(3):167-173.
[5] IION A, SUZUKI K, KASUGA M, et al. Development of a self-oscil-lating ultrasonic micro-motor and its application to a watch[J].Ultrasonic, 2000, 38(1-8):54-59.
[6] 赵淳生.超声电机技术与应用[M].北京:科学出版社,2007.
[7] 董迎晖,赵韩,黄康,等.超声波电动机效率问题的研究现状与进展[J].微特电机,2009(10):63-68. DONG Yinghui, ZHAO Han, HUANG Kang, et al. Review on the research of the ultrasonic motor efficiency[J].Small & Special Electrical Machines, 2009(10):63-68.
[8] 蒋春容,张津杨,陆旦宏.摩擦层在定子上的行波超声波电机接触模型[J].微电机,2014,47(11):5-9. JIANG Chunrong, ZHANG Jinyang, LU Danhong. Contact model of traveling wave ultrasonic with friction layer on stator[J].Micromotors, 2014, 47(11):5-9.
[9] 陈超,赵淳生.旋转型行波超声电机中三维接触机理的研究[J].中国电机工程学报,2006,26(21):149-155. CHEN Chao, ZHAO Chunsheng. Study on the three dimensional contact mechanism of traveling wave type rotary ultrasonic motor[J].Proceeding of the CSEE, 2006, 26(21):149-155.
[10] 陈超,赵淳生.行波超声波电动机中的径向滑移现象分析[C] //上海第十届中国小电机技术研讨会.上海:[出版者不祥] ,2005:147-153. CHEN Chao, ZHAO Chunsheng. Radial slip phenomenon analysis of traveling wave type rotary ultrasonic motor[C] //Processdings of the 10th small motor technology seminar. Shanghai:[s.n.] ,2005:147-153.
[11] 芦小龙,张建辉,赵淳生.行波型旋转超声电机温度场分析方法[J].中国电机工程学报,2011(18):33-39. LU Xiaolong, ZHANG Jianhui, ZHAO Chunsheng.Temperature field analysis for traveling-wave rotary ultrasonic motor[J].Proceeding of the CSEE, 2011(18):33-39.
[12] 周培.行波超声电机温度特性的探索研究[D].南京:南京航空航天大学,2008. ZHOU Pei. Studies on the temperature characteristics of traveling wane type ultrasonic motors[D].Nanjing:Nanjing University of Aeronautics and Astronautics, 2008.
[13] 王光庆,郭吉丰.行波型超声电机的温度特性[J].中国电机工程学报,2008,28(9):98-104. WANG Guangqing, GUO Jifeng. Temperature performance study of traveling-wave type ultrasonic motor[J].Proceeding of the CSEE, 2008, 28(9):98-104.
[14] 董迎晖,李志荣,赵淳生.杆状弯曲行波超声电机定子和转子的优化设计[J].振动、测试与诊断,2002,22(3):177-178. DONG Yinghui, LI Zhirong, ZHAO Chunsheng. Optimal design of the rotor and stator of a miniature bar-type ultrasonic motor[J].Journal of Vibration,Measurement & Diagnosis, 2002, 22(3):177-178.
[15] 陈超,赵淳生.柔性转子对行波超声波电动机性能的影响[J].机械工程学报,2008,44(3):152-159. CHEN Chao, ZHAO Chunsheng. Effect of flexible rotor on performance of traveling wave type rotary ultrasonic motor[J]. China Journal of Mechanical Engineering, 2008, 44(3):152-159.
[16] 赵向东.旋转型行波超声电机动力学模型及性能仿真的研究[D].南京:南京航空航天大学,2000. ZHAO Xiangdong. Research on dynamics modeling and performance simulation of traveling wave type rotary ultrasonic motor[D]. Nanjing:Nanjing University of Aeronautics and Astronautics, 2000.
[17] 陈超. 旋转型行波超声电机理论模型研究[D].南京:南京航空航天大学,2005. CHEN Chao. Research on theory model of traveling wave type rotary ultrasonic motor[D].Nanjing:Nanjing university of Aeronautics and Astronautics, 2005.
[18] 陈超,曾劲松,朱华,等.微型行波超声电机定子的参数优化设计[J].中国机械工程,2009,20(5):68-72. CHEN Chao, ZENG Jinsong, ZHU Hua, et al.Parametric optimization of stator of traveling wave type rotary ultrasonic motor[J]. China Mechanical Engineering, 2009, 20(5):68-72.
[19] 蒋春蓉,胡敏强,金龙,等中空环形行波超声波电机有限元接触模型[J].东南大学学报(自然科学版), 2014,44(1):99-103. JIANG Chunrong, HU Minqiang, JIN Long, et al.Finite element contact model of a hollow ring type traveling wave type rotary ultrasonic motor[J].Journal of Southeast University(Natural Science Edition), 2014, 44(1):99-103.
[20] 伍旺贤,纪跃波.双定子单转子型超声电机的数学建模及机械性能仿真[J].厦门大学学报(自然科学版),2015,54(6):900-904. WU Wangxian, JI Yuebo. Mathematical modeling and simulation research on mechanical properties of the traveling wave rotary ultrasonic motor with double stators and single rotor[J].Journal of Xiamen University(Natural Science), 2015, 54(6):900-904.
[1] WANG Hui,GAO Lin,ZHAO Ming-qi . A new method to predict the forming limit of sheet metal based on finite element simulation [J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2006, 36(2): 95-98 .
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
No Suggested Reading articles found!