JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE) ›› 2011, Vol. 41 ›› Issue (6): 70-74.

• Articles • Previous Articles     Next Articles

Design and implementation of the AMT data acquisition system
based on LabVIEW

ZHAO Mei1, 2, HU Tian-liang1, 2*, ZHANG Qian3, ZHANG Cheng-rui1, 2   

  1. 1. School of Mechanical Engineering, Shandong University, Jinan 250061, China;
    2.Key Laboratory of Highefficiency and Clean Mechanical Manufacture (Shandong University),
    Ministry of Education, Jinan 250061, China;
    3. School of Mechanical, Electrial & Infromation Engineering, Shandong University at Waihai, Weihai 264209, China
  • Received:2011-05-20 Online:2011-12-16 Published:2011-05-20

PDF (PC)

1128

Abstract:

In order to meet the requirement of date acquisition of an automatic transmission system, an AMT data acquisition system based on LabVIEW was designed. The basic principle of the AMT data acquisition system was  introduced, the basic system structure was built, the hardware and the software design  written based on LabVIEW were studied, and the function of the data acquisition that based on LabVIEW was analyzed. The results showed that the function of the data acquisition, display and storage were  realized. With this design, the user interface could be made more intuitive and easier to operate, so that the engineers could promptly get the system run-time information.

Key words: LabVIEW, AMT system, serial communication, date acquisition

CLC Number: 

  • TP274.2
[1] WANG Ze-jing1,2, QIN Jing-yu1*, MI Chun-xu1. Design of the system of high-accuracy resistors′ automatic data acquisition and dynamic display [J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2010, 40(4): 133-137.
[2] YANG Gang, CHEN Ming. Simulation of characteristics of silicon solar cells and its maximum power point tracking [J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2009, 39(1): 122-122.
[3] ZHANG Hui,WANG Zhi-chen,SUN Rui . The traditional instruments performance optimization by virtual instrument technology [J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2008, 38(1): 24-27 .
[4] WU Hong-en,ZHANG Cheng-rui,HU Tian-liang . The architecture of the software open CNC system based on the fieldbus [J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2007, 37(2): 12-15 .
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed   
No Suggested Reading articles found!
Copyright 2018 © Editorial office of Journal of Shandong University (Engineering Science)
Supported by Beijing Magtech Co.Ltd