您的位置:山东大学 -> 科技期刊社 -> 《山东大学学报(工学版)》

山东大学学报(工学版)

• 论文 • 上一篇    下一篇

Al-Cu合金成分变化对其凝固潜热影响的研究

郑洪亮, 孔凡利,  田学雷   

  1. 山东大学材料科学与工程学院材料液态结构及其遗传性教育部重点实验室, 山东 济南 50061
  • 收稿日期:2007-05-12 修回日期:1900-01-01 出版日期:2008-04-16 发布日期:2008-04-16
  • 通讯作者: 郑洪亮

The effect of composition on the latent heat of solidification for the Al-Cu alloy

ZHENG Hong-liang, KONG Fan-li, TIAN Xue-lei   

  1. Key Laboratory of Liquid Structure and Heredity of Materials, Ministry of Education,School of Materials Science and Engineering, Shandong University, Jinan 250061, China
  • Received:2007-05-12 Revised:1900-01-01 Online:2008-04-16 Published:2008-04-16
  • Contact: ZHENG Hong-liang

摘要: 利用差示扫描量热分析仪对不同成分的Al-Cu合金进行了研究,分析了合金成分与凝固潜热的相关性. 研究发现:在含Cu量为5~29at.%范围内,随着Cu含量的增加,合金的凝固潜热呈明显下降趋势,得出了凝固潜热值与各析出相的质量呈线性关系的结论,并给出了计算Al-Cu合金潜热的关系式.

关键词: Al-Cu合金, DSC, 潜热

Abstract:  The latent heat of Al-Cu alloy was investigated during the solidification process with differential scanning calorimetry (DSC). The result indicates that the latent heat of this alloy decreases with an increase of the copper content ranging from 5% to 29.% in molar ratio. The relationship is linear between the latent heat and the mass percentage of every phase. A formula was derived for calculating the latent heat.

Key words: DSC, latent heat , Al-Cu alloy

中图分类号: 

  • TG146
[1] 孙玉成1,郑洪亮1,吴淑霞2,田学雷1*. 铝硅合金潜热变化规律的DSC分析[J]. 山东大学学报(工学版), 2011, 41(5): 132-137.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
No Suggested Reading articles found!