应用WASP对东昌湖水质进行模拟研究

山东大学学报(工学版)

应用WASP对东昌湖水质进行模拟研究

孙文章¹，曹升乐¹, 徐光杰²

1.山东大学土建与水利学院，山东济南 250061；2. 滨州水利勘测设计研究院，山东滨州 25660

收稿日期:2007-05-15 修回日期:1900-01-01 出版日期:2008-04-16 发布日期:2008-04-16
通讯作者: 孙文章

Simulation of water quality research of Dongchang Lake using WASP

SUN Wen-zhang¹, CAO Sheng-le¹, XU Guang-jie²

1. School of Civil Engineering, Shandong University, Jinan 250061, China；2. Binzhou Water Conservancy Survey and Designing Institute, Binzhou 25660, China

Received:2007-05-15 Revised:1900-01-01 Online:2008-04-16 Published:2008-04-16
Contact: SUN Wen-zhang

摘要/Abstract

摘要： WASP(Water Quality Analysis Simulation Program)是由美国国家环保局环境研究实验室开发的，用来模拟河流、湖泊等水体水质的模型.以东昌湖污染源状况和水质监测历史数据为基础，采用WASP子程序中的EUTRO模块，对东昌湖各湖区特定时段的水质状况进行了检验性模拟.模拟结果为：模拟值与实测值相对误差较小，且变化趋势基本一致.因此，利用WASP对东昌湖进行水质模拟是可行的和有效的.

关键词: 水质模型, 东昌湖, 水质模拟, WASP

Abstract: WASP(water quality analysis simulation program) was developed by the EPA to simulate the water quality of rivers and lakes and so on. Based on the pollution situation and the water quality historical data of Dongchang Lake, using EUTRO, which is a submodule of WASP, a tested simulation was put forth on the water quality of Dongchang Lake in a specific time period. The simulation results show that the average relative error is small, and the change trend of each indicator is consistent. Therefore, the use of WASP in simulation of the water quality of Dongchang Lake is feasible and effective.

Key words: water quality model, the Dongchang Lake, water quality simulation, WASP

中图分类号:

X832

孙文章,曹升乐,徐光杰 . 应用WASP对东昌湖水质进行模拟研究[J]. 山东大学学报(工学版), 2008, 38(2): 83-85 .

SUN Wen-zhang,CAO Sheng-le,XU Guang-jie . Simulation of water quality research of Dongchang Lake using WASP[J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2008, 38(2): 83-85 .

参考文献

多维度评价

Viewed

Full text

Abstract

Cited

Shared

Discussed

[1]	张双圣,强静,刘喜坤,刘汉湖,朱雪强. 基于贝叶斯-微分进化算法的污染源识别反问题[J]. 山东大学学报(工学版), 2018, 48(1): 131-136.
[2]	许文杰,曹升乐 . 水质综合评价的模糊可变模型及其应用[J]. 山东大学学报(工学版), 2008, 38(3): 40-45 .
[3]	孙文章,曹升乐 . 东昌湖水质评价分析[J]. 山东大学学报(工学版), 2007, 37(6): 95-97 .