您的位置:山东大学 -> 科技期刊社 -> 《山东大学学报(工学版)》

山东大学学报(工学版) ›› 2010, Vol. 40 ›› Issue (2): 82-87.

• 土木工程 • 上一篇    下一篇

FRP-螺栓联合加固RC梁受剪承载能力试验研究

管延华1,2,蒋斌松1,宋修广2,杨勇3   

  1. 1. 中国矿业大学建筑工程学院深部岩土力学与地下工程国家重点实验室, 江苏 徐州 221008;
    2. 山东大学土建与水利学院, 山东 济南 250061;
    3. 济南工程职业技术学院建工系, 山东 济南 250020
  • 收稿日期:2009-12-09 出版日期:2010-04-16 发布日期:2009-12-09
  • 作者简介:管延华(1969-),男,山东胶南人,博士研究生,讲师,主要研究方向为桥梁工程.E-mail:guanyanhua@sdu.edu.cn
  • 基金资助:

    山东省交通厅资助项目(2008Y025)

Experimental study on RC beams strengthened in shear  with  hybrid bonding of FRP

GUAN Yan-hua1,2, JIANG Bin-song1, SONG Xiu-guang2, YANG Yong3   

  1. 1. State Key Laboratory for Geomechanics & Deep Underground Engineering, School of Architecture and Civil Engineering,
    China University of Mining and Technology, Xuzhou 221008, China;
    2. School of Civil Engineering, Shandong University, Jinan 250061, China;
    3. Construction Department, Jinan Engineering Vocational Technical Institute, Jinan 250020, China
  • Received:2009-12-09 Online:2010-04-16 Published:2009-12-09

关键词: FRP, 螺栓, 混合方法, 加固, 抗剪承载力

Abstract:

To definitude the effect of FRP-bolt strengthening technology, and also on the basis of the destructive characteristics of aging RC beam bridges, interior contrast tests of FRP surface adhesion and FRP-bolt hybrid boding were conducted to examine the strengthening effect on RC beams in shear. The results of the EB-FRP and HB-FRP were compared. In particular, the influence of pre-cracking level and FRP strip spacing on RC beams strengthened in shear with the hybrid bonding of FRP were assessed. The experimental results show that the hybrid bonding of FRP is a more reliable strengthening technique and which can improve the shear capacity of beams. The new mechanical fastening technique does not rely on bearings to transmit the interfacial shear, but instead increases the interfacial bond by resisting the separation of the FRP laminate from the concrete substrate by the bolt pretension. This study helps to direct the design and the construction of the HB-FRP.

Key words: fiber reinforced polymer (FRP), screw bolt, hybrid methods, strengthening, shear capacity

[1] 彭蓉蓉,俞文生. 浆液性质对注浆压力及扩散方式的影响规律[J]. 山东大学学报(工学版), 2017, 47(3): 119-124.
[2] 夏梦然,李卫,冯啸,朱光轩,李夏. 极浅埋富水砂层地铁横通道注浆加固与开挖稳定性[J]. 山东大学学报(工学版), 2017, 47(2): 47-54.
[3] 陈卫忠,陈飞飞,赵武胜,章跃林. TBM挤压大变形隧洞管片错台及加固机理研究[J]. 山东大学学报(工学版), 2017, 47(2): 1-7.
[4] 秦子鹏,田艳,李刚,马玉薇,刘乐,张金剑. BFRP层数对加固钢筋混凝土梁抗弯性能的影响[J]. 山东大学学报(工学版), 2017, 47(1): 76-83.
[5] 祁金胜,安春国,柏洁, 王湛. 圆形烟风道支座与加固肋匹配特性[J]. 山东大学学报(工学版), 2017, 47(1): 125-130.
[6] 卜良桃,袁海涛. 纤维水泥砂浆与混凝土粘结性能双面剪切试验研究[J]. 山东大学学报(工学版), 2016, 46(4): 76-82.
[7] 冯啸1,张乐文1*,刘人太1,张崇高2,孙子正1,张伟杰1. 碱土加固注浆材料试验及其工程应用[J]. 山东大学学报(工学版), 2013, 43(6): 65-71.
[8] 张晓蕊,田岚*. 语音变调方法分析及音效评估[J]. 山东大学学报(工学版), 2011, 41(1): 1-6.
[9] 葛茂杰1,2,孙杰1,2*,李剑峰1,2. 石蜡辅助加固钛合金薄壁件铣削稳定性研究[J]. 山东大学学报(工学版), 2011, 41(1): 71-77.
[10] 杨文东1,张强勇1*,宋萌勃2,杨佳1. 基于破坏接近度和强度折减法的边坡稳定性评价[J]. 山东大学学报(工学版), 2010, 40(6): 82-87.
[11] 管延华1,2,苗海涛2,宋修广2. FRP-螺栓联合加固技术锚固参数的研究[J]. 山东大学学报(工学版), 2010, 40(3): 128-132.
[12] 张强勇,向文 . 各向异性损伤锚固模型在大型公路滑坡治理工程中的应用[J]. 山东大学学报(工学版), 2006, 36(5): 82-85 .
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
No Suggested Reading articles found!