您的位置:山东大学 -> 科技期刊社 -> 《山东大学学报(工学版)》

山东大学学报(工学版)

• 论文 • 上一篇    下一篇

铝电解槽三维磁场的计算与优化(Ⅰ)——样条积分方程法计算三维磁场

刘志珍1,陈红艳2,安 琳1   

  1. 1. 山东大学电气工程学院,山东 济南 250061;2. 山东建筑大学信息与电气工程学院,山东 济南 250101
  • 收稿日期:2005-12-20 修回日期:1900-01-01 出版日期:2007-02-24 发布日期:2007-02-24
  • 通讯作者: 刘志珍

Calculation and optimization of the 3D magnetic field in an aluminum reduction cell(I)——Application of the spline integral equation method to 3D magnetic field calculation

LIU Zhi-zhen1, CHEN Hong-yan2, AN Lin1   

  1. 1. School of Electrical Engineering, Shandong University, Jinan 250061, China; 2. School of Information and Electrical Engineering, Shandong University of Architecture, Jinan 250101, China
  • Received:2005-12-20 Revised:1900-01-01 Online:2007-02-24 Published:2007-02-24
  • Contact: LIU Zhi-zhen

摘要: 介绍了样条积分方程法求解三维磁场的原理,通过计算TEAM Workshop 21问题A模型的磁场,验证了该方法的正确性.首次运用该方法对一台180?kA的预焙阳极铝电解槽的三维磁场进行了计算,计算值与测试值吻合较好,证明了该方法的有效性.

关键词: 样条积分方程法, 铝电解槽, 三维磁场

Abstract: The principle of the spline integral equation method (SIEM) is introduced, which is verified by the A type magnetic field calculation of the international TEAM Workshop 21st problem. The magnetic field distributions are computed with the SIEM in a practical 180?kA prebake anode aluminum reduction cell. The calculated results compared with the tested ones show that the SIEM is valid.

Key words: aluminum reduction cell, 3D magnetic field , spline integral equation method

中图分类号: 

  • TM153
[1] 刘志珍,陈红艳,安 琳 . 铝电解槽三维磁场的计算与优化(Ⅱ)——改进的遗传算法优化三维磁场[J]. 山东大学学报(工学版), 2007, 37(2): 47-51 .
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
No Suggested Reading articles found!