山东大学学报(工学版)
• 论文 • 上一篇 下一篇
齐洪喜, 周大水
收稿日期:
修回日期:
出版日期:
发布日期:
通讯作者:
QI Hongxi,ZHOU Dashui
Received:
Revised:
Online:
Published:
Contact:
摘要: 无驱型USB KEY专用接口的设计和实现是基于FPGA&ASIC的. 该设计主要使用Verilog语言在FPGA上实现USB协议,并提供针对USB收发器和微控制器的接口. 通过该接口USB KEY在接入系统后不需要驱动程序即可正常使用. 该设计通过了软件的仿真并在FPGA上进行了硬件验证.
关键词: FPGA, ASIC, USB, KEY, 无驱
Abstract: The design and implementation of nonedriver USB KEY's interface based on FPGA&ASIC mainly use verilog Hardware Description Language (HDL) to implement universal serial bus (USB) specification and provide a interface for USB transceiver and microcontroller unit (MCU). Using this interface, USB KEY do not need driver during enumeration. This design has been simulated by software, and succefully verified on FPGA board.
Key words: ASIC, USB, KEY, nonedriver , FPGA
齐洪喜,周大水 . 基于FPGA&ASIC的专用USB接口设计与实现[J]. 山东大学学报(工学版), 2006, 36(3): 91-94 .
QI Hongxi,ZHOU Dashui . USB interface design and implementation based on FPGA&ASIC[J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2006, 36(3): 91-94 .
0 / / 推荐
导出引用管理器 EndNote|Reference Manager|ProCite|BibTeX|RefWorks
链接本文: http://gxbwk.njournal.sdu.edu.cn/CN/
http://gxbwk.njournal.sdu.edu.cn/CN/Y2006/V36/I3/91
Cited