您的位置:山东大学 -> 科技期刊社 -> 《山东大学学报(工学版)》

山东大学学报(工学版) ›› 2016, Vol. 46 ›› Issue (5): 64-67.doi: 10.6040/j.issn.1672-3961.0.2015.407

• • 上一篇    下一篇

积分时滞对象的一种内模PID鲁棒控制方法

侯明冬1,2,王印松1,田杰3   

  1. 1. 华北电力大学控制与计算机工程学院, 河北 保定 071003;2. 山东劳动职业技术学院电气及自动化系, 山东 济南 250100;3. 山东女子学院信息技术学院, 山东 济南 250100
  • 收稿日期:2015-12-08 出版日期:2016-10-20 发布日期:2015-12-08
  • 作者简介:侯明冬(1980— ),男,山西临汾人,讲师,博士研究生,研究方向为控制器性能优化及故障诊断.E-mail:hmdcp@126.com王印松(1967— ),男,河北河间人,教授,博导,博士,主要研究方向为先进控制理论及应用,清洁能源发电系统监测与控制技术等.E-mail: wys@ncepu.edu.cn
  • 基金资助:
    华北电力大学中央高校基本科研业务费专项资金面上资助项目(2014MS152)

An IMC-PID robust control method for process of integrator plus time delay

HOU Mingdong1,2, WANG Yinsong1, TIAN Jie3   

  1. 1. School of Control and Computer Engineering, North China Electric Power University, Baoding 071003, Hebei, China;
    2. Department of Electrics and Automation, Shandong Labor Vocational and Technical College, Jinan 250100, Shandong, China;
    3. College of Information Technology, Shandong Women's University, Jinan 250100, Shandong, China
  • Received:2015-12-08 Online:2016-10-20 Published:2015-12-08

摘要: 针对工业系统中常见的具有积分和时滞特性的过程对象,基于内模控制原理,将IMC-PID(internal model control-proportional integral derivative)控制器参数整定与鲁棒控制相结合,设计一种IMC-PID控制器参数的鲁棒整定方法。通过一阶环节逼近积分环节,采用泰勒公式逼近时滞项,推导得到IMC-PID控制器参数的设计公式。并基于鲁棒性能指标给出了简单的参数整定解析表达式,实现IMC-PID控制器的鲁棒整定。仿真结果表明,基于鲁棒性能指标的IMC-PID控制方法克服了常规方法中参数整定的盲目性,可使系统同时获得良好的动态响应性能和鲁棒性。

关键词: 鲁棒性, 动态响应, 积分时滞对象, 内模PID, 参数整定

Abstract: For the integrated plus time delay in industrial system, a design and parameters tuning approach of internal model control PID(IMCPID)controller was proposed. The integrator in the model was replaced by a first-order lag, the steady-state performance of the system was improved, the time-delay term in the model was approached with the first-order Taylor expansion, and the design method of IMC-PID controller was founded. The analytical expression for robust tuning the adjustable parameter of the IMC-PID controller was derived based on the robustness index of the control system. The simulation results showed that the proposed method could provide a better dynamic performance and robustness against parameters perturbation, and the blindness of conventional method for controller parameter tuning was overcome.

Key words: dynamic response, internal model control-PID, integral process with time-delay, robustness, parameter tuning

中图分类号: 

  • TP273
[1] ALACNTARA S, ZHANG Weidong, PEDRET C, et al. IMC-like analytical H design with S/SP mixed sensitivity consideration:utility in PIDtuning guidance[J].Journal of Process Control, 2011, 21(6):976-985.
[2] ZHAO Zhicheng, LIU Zhiyuan, ZHANG Jinggang. IMC-PID tuning method based on sensitivity specification for process with timedelay[J].Journal of Central South University of Technology, 2011, 18(4):1153-1160.
[3] YIN Chengqiang, HUI Hongzhong, YUE Jiguang, et al.Cascade control based on minimum sensitivity in outer loop for processes with time delay[J].Journal of Central South University, 2012, 19(9):2689-2696.
[4] 张井岗,马文廷,赵志诚.串级时滞过程的二自由度Smith预估控制[J].山东大学学报(工学版),2015,45(5):43-50. ZHANG Jinggang, MA Wenting, ZHAO Zhicheng. Two-degree-of-freedom Smith predictor control for cascade time delay process[J].Journal of Shandong University(Engineering Science), 2015, 45(5):43-50.
[5] LI Keyu. PID tuning for optimal closed-loop performance with specifiedgain and phase margins[J]. IEEE Trans on Control Systems Technology, 2013, 21(3):1024-1030.
[6] RAO A S, RAO V S R, CHIDAMBRAM M. Direct synthesis-based controller design for integrating processes with time delay[J]. Journal of the Franklin Institute, 2009, 346(1): 38-56.
[7] SHAMSUZZOHA M, LEE M. IMC-PID controller design for improved disturbance rejection of time-delayed process[J]. Ind Eng Chem Res, 2007, 46(7):2077-2091.
[8] CHEN Dan, SEBORG D E. PI/PID controller designbased on direct synthesis and disturbance rejection[J]. Ind Eng Chem Res, 2002, 41(19):4807-4822.
[9] AHMAD Ali,SOMANATH Majhi. PID controller tuning for integrating processes[J]. ISA Transactions, 2010, 49(1):70-78.
[10] 赵志诚,刘志远,张井岗.一种时滞过程内模PID控制器鲁棒整定方法[J].信息与控制,2010,39(5):526-530. ZHAO Zhicheng, LIU Zhiyuan, ZHANG Jinggang. A robust tuning method of internal model PID controller for process with time-delay[J].Information and Control, 2010, 39(5):526-530.
[11] WANG Yagang, SHAO Huihe. PID auto-tuner based on sensitivity specification[J]. Chemical Engineering Research and Design, 2000, 78(2):312-316.
[1] 葛凯蓉, 常发亮, 董文会. 基于局部敏感直方图的稀疏表达跟踪算法[J]. 山东大学学报(工学版), 2014, 44(5): 14-19.
[2] 刘波,王有志*,安俊江,王艺霖,袁泉. 车辆—路面空间耦合振动模型及其动力响应分析[J]. 山东大学学报(工学版), 2014, 44(3): 83-89.
[3] 谢志华. 一种新的血流建模方法及其在红外人脸识别中的应用[J]. 山东大学学报(工学版), 2013, 43(5): 1-5.
[4] 赵占山1,2, 张静3, 孙连坤1, 丁刚1. 有限时间收敛的滑模自适应控制器设计[J]. 山东大学学报(工学版), 2012, 42(4): 74-78.
[5] 周长辉1, 胡永健2,余绍鹏1. 鲁棒的源扫描仪辨识算法设计[J]. 山东大学学报(工学版), 2011, 41(2): 62-65.
[6] 黄斌. 基于离散趋近律的变结构系统控制[J]. 山东大学学报(工学版), 2011, 41(1): 45-48.
[7] 李岳阳,王士同. 基于鲁棒性神经模糊网络的脉冲噪声滤波算法[J]. 山东大学学报(工学版), 2010, 40(5): 164-170.
[8] 赵永国,贾磊,蔡文剑 . 一种积分过程PID自整定方法[J]. 山东大学学报(工学版), 2008, 38(1): 48-51 .
[9] 解淑英,张承进 . 一种输入饱和受限系统的自适应逆控制[J]. 山东大学学报(工学版), 2006, 36(6): 62-66 .
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
[1] 李可,刘常春,李同磊 . 一种改进的最大互信息医学图像配准算法[J]. 山东大学学报(工学版), 2006, 36(2): 107 -110 .
[2] 岳远征. 远离平衡态玻璃的弛豫[J]. 山东大学学报(工学版), 2009, 39(5): 1 -20 .
[3] 程代展,李志强. 非线性系统线性化综述(英文)[J]. 山东大学学报(工学版), 2009, 39(2): 26 -36 .
[4] 王勇, 谢玉东.

大流量管道煤气的控制技术研究

[J]. 山东大学学报(工学版), 2009, 39(2): 70 -74 .
[5] 刘新1 ,宋思利1 ,王新洪2 . 石墨配比对钨极氩弧熔敷层TiC增强相含量及分布形态的影响[J]. 山东大学学报(工学版), 2009, 39(2): 98 -100 .
[6] 田芳1,张颖欣2,张礼3,侯秀萍3,裘南畹3. 新型金属氧化物薄膜气敏元件基材料的开发[J]. 山东大学学报(工学版), 2009, 39(2): 104 -107 .
[7] 陈华鑫, 陈拴发, 王秉纲. 基质沥青老化行为与老化机理[J]. 山东大学学报(工学版), 2009, 39(2): 125 -130 .
[8] 赵延风1,2, 王正中1,2 ,芦琴1,祝晗英3 . 梯形明渠水跃共轭水深的直接计算方法[J]. 山东大学学报(工学版), 2009, 39(2): 131 -136 .
[9] 李士进,王声特,黄乐平. 基于正反向异质性的遥感图像变化检测[J]. 山东大学学报(工学版), 2018, 48(3): 1 -9 .
[10] 赵科军 王新军 刘洋 仇一泓. 基于结构化覆盖网的连续 top-k 联接查询算法[J]. 山东大学学报(工学版), 2009, 39(5): 32 -37 .