JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE) ›› 2010, Vol. 40 ›› Issue (2): 66-70.

• Articles • Previous Articles     Next Articles

Inversion  of  an  initial  geostress  field  by  the  method  of  multivariate   analysis  and  the  research  of  engineering  application

YUE Xiao-lei1, LI Shu-cai2, CHEN Qi-hui1, GE Yan-ping1   

  1. 1. School of Civil Engineering, Shandong Jianzhu University, Jinan 250101, China; 2. Geotechnical and Structural  Engineering Research Center, School of Civil Engineering, Shandong University, Jinan 250061, China
  • Received:2009-11-26 Online:2010-04-16 Published:2009-11-26

PDF (PC)

1450

Abstract:

Based on engineering geological conditions and measured data of the geostress at a hydropower station, 3D geological models under each affecting factor were calculated by means of finite element computing tools and MATLAB. A multivariate regression model was created between the measured and calculated value of geostress at measurement points, and the optimal regression coefficient of the model was found. Consequently, the distributions of initial geostress of this area were obtained. This was the first attempt to take into account the independence and internal relations among each stress component. Thus,  more reasonable distributions of initial geostress of this area were obtained. The result indicated that the 3D calculating geostress field was reasonable.

Key words: geostress survey, initial geo-stress field, inverse analysis, multivariate regression analysis, finite element

[1] LI Lianxiang, CHE Xiuxi, LI Weilong, QIU Yefan, ZHANG Shangru, WANG Chuhan. Working mechanism and calculation analysis of RECV pile for permanent support of deep foundation pit [J]. Journal of Shandong University(Engineering Science), 2025, 55(6): 108-119.
[2] XUE Gang, ZHANG Yifan, LIU Jiangsen, DONG Wei. Inverse analysis on the softening curve of steel slag fine aggregate concrete [J]. Journal of Shandong University(Engineering Science), 2025, 55(6): 120-128.
[3] Xuhao WANG,Qianqian LIU,Hucheng LI,cheng LI,Peng LI,Yifeng LING. Research and optimization of hollow form of precast concrete pavement slab [J]. Journal of Shandong University(Engineering Science), 2022, 52(4): 139-150.
[4] Xiuguang SONG, He YANG, Xiaoyan CHEN, Wenjie CUI, Hongya YUE, Kai ZHANG, Juan TIAN. Ultimate uplift capacity of shallow vertical plate anchors in sand [J]. Journal of Shandong University(Engineering Science), 2021, 51(1): 24-31.
[5] HAN Jiazhen, WANG Yong, XIE Yudong, WANG Qixian, ZHANG Xinbiao, GAO Wenbin, LI Ronglan, ZHANG Chuanjun. Mechanical characteristics for deep sea wet-mate electrical connectors [J]. Journal of Shandong University(Engineering Science), 2020, 50(6): 30-39.
[6] LIN Chao, ZHANG Chenglin, WANG Yong. Design and mechanical properties of prestressed hollow bar [J]. Journal of Shandong University(Engineering Science), 2020, 50(5): 26-32.
[7] Xiaoguang WANG,Zhuang HE,Xianfu LI,Ao PAN. Influence of magnetic suspension rotor driving magnetic field on supporting magnetic field [J]. Journal of Shandong University(Engineering Science), 2019, 49(4): 86-92.
[8] Longlin WANG,Xundong HU,Jinsheng QI,Chunguo AN,Zhan WANG. Influence of internal pressure on the safety of exhaust duct under multiple loads [J]. Journal of Shandong University(Engineering Science), 2018, 48(6): 116-121.
[9] CHEN Rui, LI Hongwei, TIAN Jing. The relationship between the number of magnetic poles and the bearing capacity of radial magnetic bearing [J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2018, 48(2): 81-85.
[10] WEI Bengang, GUO Ruochen, HUANG Hua, WANG Zhen, LIU Pengcheng, ZHANG Yuying, LI Kejun, LOU Jie. Simulation and analysis of two dimensional temperature field of the discrete cooling system transformer based on the finite element method [J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2017, 47(6): 63-69.
[11] SU Chenggong, LIU Yan, WANG Weiqiang, WANG Yuhua. The influence of indentation on the surface residual stress of stainless steel [J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2017, 47(1): 90-96.
[12] QI Jinsheng, AN Chunguo, BAI Jie, WANG Zhan. Study on matching property of supports and stiffeneron circular exhaust duct [J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2017, 47(1): 125-130.
[13] LYU Guoren, ZHANG Qun, NIU Ben, GAO Quanting, WU Zhaoshou. The effects of pile foundation of high-rise building on adjacent structures [J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2017, 47(1): 48-58.
[14] ZHANG Wanzhi, LIU Hua, ZHANG Feng, GAO Lei, YAO Chen, LIU Guanzhi. Mechanical properties of tower and beam synchronous construction of cable-stayed bridge [J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2016, 46(6): 120-126.
[15] LEI Zhengbao, LIAO Zhuo, LIU Zhuchun. Optimized design of cross-wound cable barrier end anchorage [J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2016, 46(3): 93-98.
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed   
[1] WANG Su-yu,<\sup>,AI Xing<\sup>,ZHAO Jun<\sup>,LI Zuo-li<\sup>,LIU Zeng-wen<\sup> . Milling force prediction model for highspeed end milling 3Cr2Mo steel[J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2006, 36(1): 1 -5 .
[2] ZHANG Yong-hua,WANG An-ling,LIU Fu-ping . The reflected phase angle of low frequent inhomogeneous[J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2006, 36(2): 22 -25 .
[3] LI Kan . Empolder and implement of the embedded weld control system[J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2008, 38(4): 37 -41 .
[4] KONG Xiang-zhen,LIU Yan-jun,WANG Yong,ZHAO Xiu-hua . Compensation and simulation for the deadband of the pneumatic proportional valve[J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2006, 36(1): 99 -102 .
[5] LAI Xiang . The global domain of attraction for a kind of MKdV equations[J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2006, 36(1): 87 -92 .
[6] YU Jia yuan1, TIAN Jin ting1, ZHU Qiang zhong2. Computational intelligence and its application in psychology[J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2009, 39(1): 1 -5 .
[7] LI Liang, LUO Qiming, CHEN Enhong. Graph-based ranking model for object-level search
[J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2009, 39(1): 15 -21 .
[8] CHEN Rui, LI Hongwei, TIAN Jing. The relationship between the number of magnetic poles and the bearing capacity of radial magnetic bearing[J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2018, 48(2): 81 -85 .
[9] WANG Bo,WANG Ning-sheng . Automatic generation and combinatory optimization of disassembly sequence for mechanical-electric assembly[J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2006, 36(2): 52 -57 .
[10] LI Ke,LIU Chang-chun,LI Tong-lei . Medical registration approach using improved maximization of mutual information[J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2006, 36(2): 107 -110 .
Copyright 2018 © Editorial office of Journal of Shandong University (Engineering Science)
Supported by Beijing Magtech Co.Ltd