您的位置:山东大学 -> 科技期刊社 -> 《山东大学学报(工学版)》

山东大学学报(工学版) ›› 2012, Vol. 42 ›› Issue (4): 132-136.

• 其他 • 上一篇    下一篇

新型弹性管束固有振动特性实验及数值模拟

姜波1,田茂诚2*,郝卫东1, 刘福国1   

  1. 1. 山东电力集团公司电力科学研究院, 山东 济南 250002;
    2. 山东大学能源与动力工程学院, 山东 济南 250061
  • 收稿日期:2012-03-20 出版日期:2012-08-20 发布日期:2012-03-20
  • 通讯作者: 田茂诚(1965- ),男,山东桓台人,教授,博导,主要研究方向为强化传热与节能技术. E-mail: tianmc65@sdu.edu.cn E-mail: tianmc65@sdu.edu.cn
  • 作者简介:姜波(1982- ),男,山东荣成人,工程师,博士,主要研究方向为强化传热与节能技术. E-mail: sdujiang@126.com
  • 基金资助:

    国家重点基础研究发展计划资助项目(No.2007CB206903)

Experiment and numerical simulation on inherent vibration charact eristics of the new elastic tube bundle

JIANG Bo1, TIAN Mao-cheng2*, HAO Wei-dong1,  LIU Fu-guo1   

  1. 1. Shandong Electric Power Research Institute, Jinan 250002, China;
    2. School of Energy Source and Power Engineering, Shandong University, Jinan 250061, China
  • Received:2012-03-20 Online:2012-08-20 Published:2012-03-20

摘要:

结合原弹性管束的结构及工作特点,提出了弹性管束的优化结构。理论推导了弹性管束的端部受力特性,并采用实验与数值模拟相结合的方法对管束振动特性进行研究,得到了其面外、面内振动的振型、固有频率。实验结果表明,与原弹性管束相比,新型弹性管束端部截面所受弯矩不足原管束的1/6,安全性能有了较大提高;固有频率较原管束低,更易于在外流的激励下产生振动;单位容积的传热面积相应增加24.7%。

关键词: 强化传热, 振动, 弹性管束, 有限元, 模态分析

Abstract:

An optimizd structure of elastic tube bundle was proposed considering the structure and operating features of the original type. The mechanical properties of the end region of the elastic tube bundle were deduced theoretically, and thorough researches were carried out on the inherent vibration characteristics of the tube bundle by the combinatior experiment  and  numerical simulation. The modes of  the  out-of-plane and inplane vibration, natural frequency of the tube bundle were obtained. The experiment results showed that the bending moment endured in the end section of the new elastic tube bundle was one sixth times less than that of the original tube bundle, which improved the safety property significantly.  The natural frequency was lower than that the original of tube bundle, which make  it easier for the tube bundle to vibrate under the stimulation of external flow. The heat transfer area per unit volume increased by 24.7% accordingly.

Key words: heat transfer enhancement, vibration, elastic tube bundle, finite element, modal analysis

[1] 李连祥,车秀熙,李未龙,邱叶凡,张尚儒,汪楚涵. 深基坑永久支护RECV桩工作机理与计算分析[J]. 山东大学学报 (工学版), 2025, 55(6): 108-119.
[2] 李旭,杨斌,刘昌斌,牛军川. 全柔性隔振系统的有限元功率流可视化研究[J]. 山东大学学报 (工学版), 2024, 54(6): 176-181.
[3] 郭海坡,文毅然,杨为民,丁万涛. 城市硬岩下地铁隧道管片壁后注浆隔振优化分析[J]. 山东大学学报 (工学版), 2024, 54(4): 95-105.
[4] 樊禹江,丁佳雄,黄欢欢,廖凯,许锦宝. 一种新型装配式混凝土剪力墙等效平面桁架模型[J]. 山东大学学报 (工学版), 2024, 54(3): 94-102.
[5] 罗靓,晏宇翔,吕辉,张成明. 异形钢管混凝土轴压短柱力学性能[J]. 山东大学学报 (工学版), 2024, 54(3): 103-114.
[6] 扈萍,李萌,滕越,马少坤, 张西文. 考虑主应力偏转影响的基坑开挖应力路径[J]. 山东大学学报 (工学版), 2023, 53(6): 100-107.
[7] 柴少波,史杰辉,阿比尔的,刘钦,宋浪. P波入射含顺层结构面岩质边坡引起的振动[J]. 山东大学学报 (工学版), 2023, 53(3): 31-40.
[8] 王旭昊,刘倩倩,李虎成,李程,李鹏,凌一峰. 装配式水泥混凝土路面板空心形式研究与优化[J]. 山东大学学报 (工学版), 2022, 52(4): 139-150.
[9] 戚翔,冯翔健,熊骋望,孙子正,张一鸣. 低雷诺数下近自由液面圆柱流致振动数值模拟与机理[J]. 山东大学学报 (工学版), 2022, 52(3): 51-60.
[10] 耿麒,张俊杰,汪珂,路宇峰,谢立扬,叶敏. 基于FEM-SPH耦合的TBM滚刀切削仿真与试验研究[J]. 山东大学学报 (工学版), 2022, 52(1): 93-102.
[11] 杜文静,赵浚哲,张立新,王湛,季万祥. 换热器结构发展综述及展望[J]. 山东大学学报 (工学版), 2021, 51(5): 76-83.
[12] 宋修广, 杨鹤, 陈晓燕, 崔文杰, 岳红亚, 张恺, 田隽. 砂土中浅埋竖向锚定板极限承载力[J]. 山东大学学报 (工学版), 2021, 51(1): 24-31.
[13] 韩家桢,王勇,谢玉东,王启先,张新标,高文彬,李荣兰,张传军. 深海带电插拔连接器力学特性分析[J]. 山东大学学报 (工学版), 2020, 50(6): 30-39.
[14] 林超,张程林,王勇. 预应力中空棒构件设计与力学特性[J]. 山东大学学报 (工学版), 2020, 50(5): 26-32.
[15] 刘欣,杨锋苓. 柔性Rushton桨的振动特性[J]. 山东大学学报 (工学版), 2020, 50(5): 50-55.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
[1] 施来顺,万忠义 . 新型甜菜碱型沥青乳化剂的合成与性能测试[J]. 山东大学学报(工学版), 2008, 38(4): 112 -115 .
[2] 王波,王宁生 . 机电装配体拆卸序列的自动生成及组合优化[J]. 山东大学学报(工学版), 2006, 36(2): 52 -57 .
[3] 李可,刘常春,李同磊 . 一种改进的最大互信息医学图像配准算法[J]. 山东大学学报(工学版), 2006, 36(2): 107 -110 .
[4] 秦通,孙丰荣*,王丽梅,王庆浩,李新彩. 基于极大圆盘引导的形状插值实现三维表面重建[J]. 山东大学学报(工学版), 2010, 40(3): 1 -5 .
[5] 刘文亮,朱维红,陈涤,张泓泉. 基于雷达图像的运动目标形态检测及跟踪技术[J]. 山东大学学报(工学版), 2010, 40(3): 31 -36 .
[6] 刘忠国,张晓静,刘伯强,刘常春 . 视觉刺激间隔对大脑诱发电位的影响[J]. 山东大学学报(工学版), 2006, 36(3): 34 -38 .
[7] 孙玉利,李法德,左敦稳,戚美 . 直立分室式流体连续通电加热系统的升温特性[J]. 山东大学学报(工学版), 2006, 36(6): 19 -23 .
[8] 孙从征,管从胜,秦敬玉,程川 . 铝合金化学镀镍磷合金结构和性能[J]. 山东大学学报(工学版), 2007, 37(5): 108 -112 .
[9] 胡天亮,李鹏,张承瑞,左毅 . 基于VHDL的正交编码脉冲电路解码计数器设计[J]. 山东大学学报(工学版), 2008, 38(3): 10 -13 .
[10] 徐丽丽,季忠,夏继梅 . 同规格货物装箱问题的优化计算[J]. 山东大学学报(工学版), 2008, 38(3): 14 -17 .