您的位置:山东大学 -> 科技期刊社 -> 《山东大学学报(工学版)》

山东大学学报(工学版)

• 论文 • 上一篇    下一篇

自激脉冲喷嘴结构参数对涡环影响的数值分析

曲延鹏, 李春峰, 隋荣娟,滕书格, 王小鹏   

  1. 山东大学机械工程学院,山东济南250061
  • 收稿日期:2005-11-19 修回日期:1900-01-01 出版日期:2006-04-24 发布日期:2006-04-24
  • 通讯作者: 曲延鹏

The numerical analysis on structural parameters of self-excited pulsed jet to the eddy ring

QU Yan-peng,LI Chun-feng,SUI Rong-juan,TENG Shu-ge,WANG Xiao-peng   

  1. School of Mechanical Engineering,Shandong University,Jinan 250061,China
  • Received:2005-11-19 Revised:1900-01-01 Online:2006-04-24 Published:2006-04-24
  • Contact: QU Yan-peng

摘要: 要使自激脉冲喷嘴产生良好的激振, 影响自激腔内涡环结构的喷嘴腔体直径、腔体长度、上喷嘴直径、下喷嘴直径、碰撞壁中心角等参数必须相互配合.采用无量纲量,针对3种腔径、5种腔长、4种下喷嘴直径和1种上喷嘴直径配合而成的多种工况进行交叉数值分析.通过对数值模拟结果的分析,给出自激喷嘴结构参数的最优数值配比.

关键词: 自激脉冲喷嘴, 结构参数, 涡环, 数值分析

Abstract: The parameters, which includes the diameter of the jet chamber, chamber length, the diameter of upper and lower jet, the center angle of the collapse wall, must match excellently to produce fine excited vibration. Dimensional analyses are employed to complete numerical simulation with a variety of states combining three chamber diameters, five chamber lengthes, four upper and one lower jet diameters. The numerical foundation of the optimization on the self-excited pulse jet is investigated through the analysis of the simulation results.

Key words: structural parameters, eddy ring, numerical analysis , self-excited pulsed jet

中图分类号: 

  • TH421
[1] 秦小琼1,2, 刘德学1*. 杯形件反挤压变形力的滑移线场数值分析解[J]. 山东大学学报(工学版), 2011, 41(6): 66-69.
[2] 赵元宾,孙奉仲,王凯,高明 . 自然通风湿式冷却塔传热传质的三维数值分析[J]. 山东大学学报(工学版), 2008, 38(5): 36-41 .
[3] 陈颂英,李春峰,曲延鹏 . 新型自激振荡脉冲射流影响因素[J]. 山东大学学报(工学版), 2006, 36(4): 12-15 .
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
No Suggested Reading articles found!