您的位置:山东大学 -> 科技期刊社 -> 《山东大学学报(工学版)》

山东大学学报(工学版) ›› 2017, Vol. 47 ›› Issue (2): 117-122.doi: 10.6040/j.issn.1672-3961.0.2016.212

• 化学与环境 • 上一篇    下一篇

提输卤管道用减阻剂的合成、表征及其性能

连露,韩祥生,张长桥,于萍,魏云鹤*   

  1. 山东大学化学与化工学院, 山东 济南 250061
  • 收稿日期:2016-06-14 出版日期:2017-04-20 发布日期:2016-06-14
  • 通讯作者: 魏云鹤(1959— ),男,山东济南人,教授,硕导,主要研究方向为功能高分子的研究.E-mail:weiyunhe@sdu.edu.cn E-mail:9660539879@qq.com
  • 作者简介:连露(1989— ),男,山西襄垣人,硕士研究生,主要研究方向为功能高分子的合成与应用.E-mail:9660539879@qq.com

Preparation, characterization and performance of drag reduction agent used in pipeline of brine mining and transportation

LIAN Lu, HAN Xiangsheng, ZHANG Changqiao, YU Ping, WEI Yunhe*   

  1. School of Chemistry and Chemical Engineering, Shandong University, Jinan 250061, Shandong, China
  • Received:2016-06-14 Online:2017-04-20 Published:2016-06-14

摘要: 为了降低深层卤水提输过程的能耗,开展耐温耐盐的提输卤管道用减阻剂研究具有重要的现实意义。以丙烯酰胺(AM),2-丙烯酰胺基-2-甲基丙磺酸(AMPS)和丙烯酸(AA)为单体, 采用氧化还原引发剂体系水溶液聚合法合成耐温耐盐的提输卤管道用减阻聚合物P(AM/AMPS/AA)。以聚合物在常温卤水管道中的减阻率为考核指标,设计四因素三水平正交试验,确定最佳合成条件为:反应系统pH为1,反应温度为30 ℃,单体质量配比为m(AM)∶m(AMPS)∶m(AA)=15∶3∶2,引发剂加入质量为单体总质量的0.04%。根据在线红外分析结果确定最佳反应时间为3 h。利用FTIR和1H NMR等手段对P(AM/AMPS/AA)的结构进行表征并用多角激光光散射仪测定其分子量。在自制的减阻率测试环道上对合成聚合物的减阻性能进行测试,合成聚合物表现出较好的耐温耐盐性能,减阻效果明显。如在模拟卤水质量浓度150 g/L、水温15 ℃、流量950 L/h、减阻剂用量为20 mg时,合成减阻聚合物的减阻率可以达到41.2%。与现有减阻剂相比,合成的P(AM/AMPS/AA)减阻聚合物减阻性能大幅度提高,具有较好的开发应用前景。

关键词: 提输卤管道, 共聚物, 丙烯酰胺, 2-丙烯酰胺基-2-甲基丙磺酸, 减阻剂, 丙烯酸, 耐温耐盐性

Abstract: In order to reduce the energy consumption of the deep brine extraction process, the research on heat resistance and salt tolerance of halogen pipeline drag reduction agent has important practical significance. The synthesis of P(AM/AMPS/AA)adopted redox system by initiated acrylamide(AM)and 2-acrylamide-2-methyl-1-propanesulfonic acid(AMPS)and acrylic acid(AA)in aqueous solution was studied. The optimum experimental conditions were obtained by orthogonal experimental design and online reaction infrared spectrogram. The optimum conditions were as the followings, temperature was 30 ℃, pH value was 1, the monomer mass ratio was 15∶3∶2, the initiator concentration was 0.04%, and the optimized reaction time was 3 h.The structure of P(AM/AMPS/AA)was characterized by FTIR and 1H NMR, and the molecular weight was tested by MALLS. The drag reduction performance of the synthetic polymer was tested on a self-made test pipeline, and the polymer showed better heat resistance and salt resistance, and the drag reduction effect was obvious.When the simulation of brine salinity was 150 g/L, the water temperature was 15 ℃, the flow rate was 950 L/h, the dosage was 20 mg, the polymer drag reduction rate could reach 41.2%. Compared with the existing drag reducing agent, the drag reduction performance was greatly improved, which would have good development and application.

Key words: acrylamide, acrylic acid, heat resistance and salt resistance, copolymer, pipeline of brine mining and transportation, 2-acrylamide-2-methyl-1-propanesulfonic acid, drag reduction agent

中图分类号: 

  • TQ317
[1] 周训,姜长龙,韩佳君,等.沉积盆地深层地下卤水资源量评价之若干探讨[J].地球学报,2013,34(5):610-616. ZHOU Xun, JIANG Changlong, HAN Jiajun, et al.Some problems related to the evaluation of subsurface brine resources in deep-seated aquifers in sedimentary basins [J]. Acta Geoscientica Sinica, 2013, 34(5):610-616.
[2] 马振民,雒芸芸,侯玉松.深层卤水资源的可持续开发利用[J].济南大学学报(自然科学版),2013,27(4):331-335. MA Zhenmin, LUO Yunyun, HOU Yusong. Research on the sustainable development and utilization of deep brine[J]. Journal of University of Jinan(Science and Technology), 2013, 27(4):331-335.
[3] 韩积斌,许建新,安朝,等. 盐湖地下卤水的开采技术及其展望[J].盐湖研究,2015,23(1):61-72. HAN Jibin, XU Jianxin, AN Zhao, et al. Research advance of the salt lake underground brine extraction technology[J]. Journal of Salt Lake Research, 2015, 23(1):61-72.
[4] 周昊,徐啸,赵会军,等.仿生非光滑表面减阻技术在油气管道中的应用[J].管道技术与设备,2014,2(2):8-10. ZHOU Hao, XU Xiao, ZHAO Huijun, et al. Application of biomimetics no-smooth surface drag reduction technique to oil and gas pipeline[J]. Technique and Equipment, 2014, 2(2):8-10.
[5] 马卫锋,罗金恒,蔡克,等.在役天然气管道内涂层性能试验研究[J].管道技术与设备,2012,6(6):7-10. MA Weifeng, LUO Jinheng, CAI Ke, et al. Research on the performance tests of resistance-reducing internal coating of in-service natural gas pipelines[J]. Technique and Equipment, 2012, 6(6):7-10.
[6] 马付良,曾志翔,高义民,等.仿生表面减阻的研究现状与进展[J].中国表面工程,2016,29(1):715. MA Fuliang, ZENG Zhixiang, GAO Yimin, et al. Research status and progress of bionic surface drag reduction[J].China Surface Engineering, 2016, 29(1):7-15.
[7] 李国平,杨睿.国内外减阻剂研制及生产新进展[J].油气储运, 2000, 19(1): 3-7. LI Guoping, YANG Rui.New progress of research and development of drag reducing agent at home and abroad[J].Oil & Gas Storage and Transportation, 2000, 19(1): 3-7.
[8] 陈世伟,张长桥.甲基丙烯酸酯-乙烯基吡啶-丙烯锌三元缔合型配位络合石油减阻剂的合成及其减阻和抗剪切性能的研究[J].山东大学学报(工学版),2012,42(2):90-96. CHEN Shiwei, ZHANG Changqiao. Study of the synthesis and properties of drag reduction and anti-shearing stability of coordination compound oil reducers based on laurel metharylate-vinyl pyridine-zinc dimethacrylate[J].Journal of Shandong University(Engineer Science), 2012, 42(2):90-96.
[9] 李浩宇,薛延军.EP系列减阻剂在原油管道中的应用[J].天然气与石油,2013,31(6):23-25. LI Haoyu, XUE Yanjun. Application of EP series drag reduction agents in crude oil pipeline[J].Natural Gas and Oil, 2013, 31(6):23-25.
[10] 韩祥生,张凤娟,楚丹丹,等. 磺甲基化聚丙烯酰胺合成及在卤水管道的应用[J].盐业与化工,2015,44(8):30-33. HAN Xiangsheng, ZHANG Fengjuan, CHU Dandan, et al. Synthesis of sulfonated methylation polyacrylamide and its application in the brine pipeline[J]. Journal of Salt and Chemical Industry, 2015, 44(8):30-33.
[11] 蔡伟华.聚丙烯酰胺水溶液减阻特性试验研究[D].哈尔滨:哈尔滨工业大学,2008. CAI Weihua. Experiment study of drag reducing characteristics for aqueous polyacrylamide solution [D].Haerbin: Harbin Institute of Technology, 2008.
[12] 王瑞,李倩,岳钦艳.小麦秸秆/改性膨润土基高吸水性树脂的制备[J].山东大学学报(工学版),2012,42(6):115-120. WANG Rui, LI Qian, YUE Qinyan, et al. Preparation of absorbent resin based on wheat straw/modified bentonite[J].Journal of Shandong University(Engineer Science), 2012, 42(6):115-120.
[13] 郭锦棠,周贤明,靳建洲,等.抗高温耐盐AMPS/AM/AA降失水剂的合成及其性能表征[J].石油学报,2011,32(3):470-472. GUO Jintang, ZHOU Xianming, JIN Jianzhou, et al. The synthesis and performance characterization of the AMPS/AM/AA terpolymer as a temperature-resistance salt-tolerance fluid-loss additive[J]. Acta Petrolei Sinica, 2011, 32(3):470-472.
[14] 占程程,赵林. AM/AMPS/DMAM三元共聚物的合成及性能研究[J].应用化工,2005,34(11):678-679. ZHAN Chengcheng, ZHAO Lin. Study on preparation and performance of AM/AMPS/DMAM terpolymer[J]. Applied Chemical Industry, 2005, 34(11):678-679.
[15] 胡渤,王芳,高宝玉,等.油田配聚污水水质对聚合物溶液黏度的影响及其机理[J].山东大学学报(工学版),2016,46(1):80-85. HU Bo, WANG Fang, GAO Baoyu, et al. Study on the effect and mechanism of oilfield produced water quality on reducing the viscosity of polymer solution [J]. Journal of Shandong University(Engineer Science), 2016, 46(1):80-85.
[16] 税碧垣,刘兵,李国平,等.减阻剂的模拟环道评价[J].油气储运, 2001,20(3):45-50. SHUI Biyuan, LIU Bing, LI Guoping, et al. The simulative loop evaluation for drag reduction agent[J]. Oil & Gas Storage and Transportation, 2001, 20(3):45-50.
[17] 罗旗荣,曹旦夫,丁友,等. 临濮输油管道添加减阻剂运行现场试验[J].油气储运,2005,24(6):31-34. LUO Qirong, CAO Danfu, DING You, et al.Site experiment on the oil pipeline running with DRA for LinPu oil pipeline[J]. Oil & Gas Storage and Transportation, 2005, 24(6):31-34.
[18] 郑文.高分子聚合物和流体的减阻[J].高分子通报,1989(4):21-24. ZHENG Wen. Drag reducing polymer and fluid drag reduction[J].Chinese Polymer Bulletin, 1989(4):21-24.
[19] 侯晖昌. 减阻力学[M]. 北京:科学出版社,1987.
[20] 邵禹铭,管民,李慧萍. 管输油品减阻剂性能评价的研究[J]. 油气储运,2005,24(5):27-30. SHAO Yuming, GUAN Min, LI Huiping. Study on the property test of drag reduction agent[J]. Oil & Gas Storage and Transportation, 2005, 24(5):27-30.
[21] 苗领,李玉江,李枫.聚合物/表面活性剂驱模拟采出水的乳化稳定性[J].山东大学学报(工学版),2015,45(2):89-94. MIAO Ling, LI Yujiang, LI Feng. Emulsion stability of simulated polymer/surfactant flooding produced water[J]. Journal of Shandong University(Engineer Science), 2015, 45(2):89-94.
[22] 连露,韩祥生,楚丹丹,等.聚丙烯酰胺在清水及卤水管道中的减阻性能[J].中国井矿盐,2015, 46(3):17-20. LIAN Lu, HAN Xiangsheng, CHU Dandan, et al. The drag reduction performance of polyacrylamide in water and brine pipeline[J]. China Well and Rock Salt, 2015, 46(3):17-20.
[1] 胡渤,王芳,高宝玉,徐世平,马宝东. 油田配聚污水水质对聚合物溶液黏度的影响及其机理[J]. 山东大学学报(工学版), 2016, 46(1): 80-85.
[2] 陈世伟1, 慕春玲2,吕小博1,王齐天1, 张长桥1*. 甲基丙烯酸酯-乙烯基吡啶-丙烯锌三元缔合型配位络合石油减阻剂的合成及其减阻和抗剪切性能的研究[J]. 山东大学学报(工学版), 2012, 42(2): 90-96.
[3] 韩涛1, 王晓云2,于萍1*, 代晓东3,吕小博1,李冰1. 甲基丙烯酸十八酯基油溶性聚合物反应过程的在线红外研究[J]. 山东大学学报(工学版), 2011, 41(2): 144-148.
[4] 张保良1,王洪运1,秦绪平1*,赵芳1,冯维红1,郭波2. Poly(AM/AMPS)反相乳液的Hofmann降解及其在脱除Cu2+方面的应用[J]. 山东大学学报(工学版), 2011, 41(1): 126-132.
[5] 霍朝飞1,李冰1,于萍1*,张长桥1,陈祥俊2. 甲基丙烯酸长链酯基氢键缔合型减阻聚合物的合成工艺与流变行为研究[J]. 山东大学学报(工学版), 2010, 40(6): 100-106.
[6] 庞志俭 张长桥. 甲基丙烯酸十二酯基二元共聚制备缔合减阻剂的合成与性能研究[J]. 山东大学学报(工学版), 2009, 39(5): 128-132.
[7] 刘晓平 王洪运 张鹏 秦绪平 张孟力. 三元共聚阳离子聚丙烯酰胺的合成及性能评价[J]. 山东大学学报(工学版), 2009, 39(3): 71-76.
[8] 李春晓 岳钦艳 卢磊 高宝玉 杨忠莲 司晓慧 倪寿清 王元芳. 疏水缔合阳离子聚丙烯酰胺的合成与应用[J]. 山东大学学报(工学版), 2008, 38(6): 99-104.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
No Suggested Reading articles found!