JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE) ›› 2010, Vol. 40 ›› Issue (6): 82-87.

• Articles • Previous Articles     Next Articles

Stability assessment of a high slope based on the failure approach index and strength reduction method

YANG Wen-dong1, ZHANG Qiang-yong1*, SONG Meng-bo2, YANG Jia1   

  1. 1. Geotechnical and Structural Engineering Research Center, Shandong University, Jinan 250061, China;
    2. Changjiang Engineering Vocational College, Wuhan 430212,  China
  • Received:2010-04-28 Online:2010-12-16 Published:2010-04-28

PDF (PC)

1616

Abstract:

The displacement, stress and plastic zone of a high slope after excavation step by step were  analyzed using numerical analysis, and the important parts which should be reinforced was pointed out. The safety factor of the slope was obtained  through the finite difference strength reduction method, and on the basis of the FAI (failure approach index) concept, the criticality of the non-failure zone and degree of damage for the failure zone were  evaluated. The results proved that the two methods which are used to evaluate the excavation stability of slope can not only show the stability degree of slope, but can  also line out the position and extent of failure zones, damage zones and disturbed zones, provide the position of the sliding surface, and characterize the stability rules of the rock-mass. The methods  helpful to construction of the slope were presented.
 

Key words: failure approach index, finite difference strength reduction method, stability of high slope, safety control and reinforcement

[1] ZHU Deng-yuan1, 2, YAO Zhan-yong1*, GUAN Yan-hua1, ZHUANG Pei-zhi1. Balance analysis of the pavement structure based on failure approach index [J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2012, 42(6): 74-79.
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed   
[1] WANG Su-yu,<\sup>,AI Xing<\sup>,ZHAO Jun<\sup>,LI Zuo-li<\sup>,LIU Zeng-wen<\sup> . Milling force prediction model for highspeed end milling 3Cr2Mo steel[J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2006, 36(1): 1 -5 .
[2] ZHANG Yong-hua,WANG An-ling,LIU Fu-ping . The reflected phase angle of low frequent inhomogeneous[J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2006, 36(2): 22 -25 .
[3] LI Kan . Empolder and implement of the embedded weld control system[J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2008, 38(4): 37 -41 .
[4] SHI Lai-shun,WAN Zhong-yi . Synthesis and performance evaluation of a novel betaine-type asphalt emulsifier[J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2008, 38(4): 112 -115 .
[5] KONG Xiang-zhen,LIU Yan-jun,WANG Yong,ZHAO Xiu-hua . Compensation and simulation for the deadband of the pneumatic proportional valve[J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2006, 36(1): 99 -102 .
[6] LAI Xiang . The global domain of attraction for a kind of MKdV equations[J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2006, 36(1): 87 -92 .
[7] YU Jia yuan1, TIAN Jin ting1, ZHU Qiang zhong2. Computational intelligence and its application in psychology[J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2009, 39(1): 1 -5 .
[8] CHEN Rui, LI Hongwei, TIAN Jing. The relationship between the number of magnetic poles and the bearing capacity of radial magnetic bearing[J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2018, 48(2): 81 -85 .
[9] LI Ke,LIU Chang-chun,LI Tong-lei . Medical registration approach using improved maximization of mutual information[J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2006, 36(2): 107 -110 .
[10] JI Tao,GAO Xu/sup>,SUN Tong-jing,XUE Yong-duan/sup>,XU Bing-yin/sup> . Characteristic analysis of fault generated traveling waves in 10 Kv automatic blocking and continuous power transmission lines[J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2006, 36(2): 111 -116 .
Copyright 2018 © Editorial office of Journal of Shandong University (Engineering Science)
Supported by Beijing Magtech Co.Ltd