基于模糊神经元网络的阀控马达系统仿真

Abstract

Abstract: A new control scheme based on fuzzy neural network(FNN) for valvecontrolled motor was presented. By using the control strategies of fuzzy logic and neural networks, a new control algorithm was designed to solve the control problems. The FNN controller combined fuzzy control with neural network technique. It possessed not only the simplicity and the nonlinear control ability of fuzzy control but also the learning and adaptive functions by using neural network，therefore the adaptability and performances of valvecontrolled motor system was improved.

Key words: fuzzy neural network control, simulation , valvecontrolled motor

LIU Yanjun,YU Gang,ZHAO Jingwei . [J].JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2006, 36(4): 96-99 .

References

Related Articles 15

[1]	LIU Qiming, WANG Wenhui, PAN Yingnan, GAO Yaohui, ZHENG Chengcheng, HE Peng. Influence of thickness defects on the stability of the primary support structure and risk assessment [J]. Journal of Shandong University(Engineering Science), 2025, 55(5): 165-178.
[2]	DONG Ge, HUANG Shuting, WANG Jun, XUE Gang, LIU Yanjun. The stable motion response of floating platform based on swing arm float array [J]. Journal of Shandong University(Engineering Science), 2025, 55(2): 156-164.
[3]	Yuxin WANG,Sizhong LÜ,Wang YAO,Chunjin LIN,Ming ZHANG,Zhaofeng LI,Jian ZHANG,Yansheng WANG. Parameter design and effect evaluation of pile side splitting grouting insilty clay stratum [J]. Journal of Shandong University(Engineering Science), 2023, 53(6): 70-81.
[4]	Xiuguang SONG,Xinming GUO,Fang YAN,Guoqiang LI,Yuan TIAN. Intelligent scheduling technology of highway emergency rescue vehicle [J]. Journal of Shandong University(Engineering Science), 2023, 53(4): 1-17.
[5]	Pengning GUO,Wei LIU,Hao YUAN,Shuo FENG,Yangang WANG. Analysis of screw extrusion dehydration efficiency based on micro element discrete model [J]. Journal of Shandong University(Engineering Science), 2023, 53(1): 114-121.
[6]	Yiming ZHANG,Yunpeng LI,Jing LI,Junyu CONG. Development of numerical calculation for coupled multi-field problems in cracked/porous media [J]. Journal of Shandong University(Engineering Science), 2022, 52(6): 63-78.
[7]	Xuhao WANG,Qianqian LIU,Hucheng LI,cheng LI,Peng LI,Yifeng LING. Research and optimization of hollow form of precast concrete pavement slab [J]. Journal of Shandong University(Engineering Science), 2022, 52(4): 139-150.
[8]	Weiqin ZHENG,Jie XU,Jie SUN,Ke WU. Mechanical characteristics of TBM tunnel segment in composite stratum [J]. Journal of Shandong University(Engineering Science), 2022, 52(4): 210-213.
[9]	Li TIAN,Laiyi ZHANG,Yanming WANG,Juncai LIU. Research progress of building structure under typhoon [J]. Journal of Shandong University(Engineering Science), 2022, 52(1): 28-38.
[10]	Yingxin LIU,Jian QIN,Yanjun LIU. The analysis of key parameters of hydraulic energy storage system of wave energy converter [J]. Journal of Shandong University(Engineering Science), 2021, 51(6): 1-8.
[11]	TIAN Li,Wenzhe BI,Sarim Saleem SIDDIQUI,Kaiyue LIU. Review on structural resistance to downburst wind loads [J]. Journal of Shandong University(Engineering Science), 2021, 51(5): 32-41.
[12]	LU Guangzhao, ZHOU Bo, XU Feng, SHANGGUAN Wei, WANG Gang, ZHANG Shubo. Stability analysis and construction mechanics of shallow buried bias tunnel openings [J]. Journal of Shandong University(Engineering Science), 2021, 51(4): 61-70.
[13]	GONG Weiping, GUAN Hongjun, LI Hongwei, LIU Jieben, SHI Yuetao. Optimization of heating load distribution of combined unit based on EBSILON simulation software [J]. Journal of Shandong University(Engineering Science), 2021, 51(4): 77-83.
[14]	WANG Chunguo. Optimization of ventilation system of TBM tunnel construction and evaluation of dust suppression effect [J]. Journal of Shandong University(Engineering Science), 2021, 51(3): 52-60.
[15]	Chunguo WANG. Study on full face hard rock tunnel boring machine through the overpass in composite stratum [J]. Journal of Shandong University(Engineering Science), 2021, 51(3): 45-51.

Metrics

Viewed

Full text

Abstract

Cited

Shared

Discussed

Comments

Recommended 10

[1]	WANG Su-yu,<\sup>,AI Xing<\sup>,ZHAO Jun<\sup>,LI Zuo-li<\sup>,LIU Zeng-wen<\sup> . Milling force prediction model for highspeed end milling 3Cr2Mo steel[J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2006, 36(1): 1 -5 .
[2]	LI Kan . Empolder and implement of the embedded weld control system[J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2008, 38(4): 37 -41 .
[3]	KONG Xiang-zhen,LIU Yan-jun,WANG Yong,ZHAO Xiu-hua . Compensation and simulation for the deadband of the pneumatic proportional valve[J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2006, 36(1): 99 -102 .
[4]	LAI Xiang . The global domain of attraction for a kind of MKdV equations[J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2006, 36(1): 87 -92 .
[5]	CHEN Rui, LI Hongwei, TIAN Jing. The relationship between the number of magnetic poles and the bearing capacity of radial magnetic bearing[J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2018, 48(2): 81 -85 .
[6]	LI Ke,LIU Chang-chun,LI Tong-lei . Medical registration approach using improved maximization of mutual information[J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2006, 36(2): 107 -110 .
[7]	JI Tao,GAO Xu/sup>,SUN Tong-jing,XUE Yong-duan/sup>,XU Bing-yin/sup> . Characteristic analysis of fault generated traveling waves in 10 Kv automatic blocking and continuous power transmission lines[J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2006, 36(2): 111 -116 .
[8]	. [J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2009, 39(1): 27 -32 .
[9]	WANG Li-ju,HUANG Qi-cheng,WANG Zhao-xu . [J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2006, 36(6): 51 -56 .
[10]	SUN Dianzhu, ZHU Changzhi, LI Yanrui. [J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2009, 39(1): 84 -86 .