JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE) ›› 2017, Vol. 47 ›› Issue (1): 125-130.doi: 10.6040/j.issn.1672-3961.0.2016.264

Previous Articles    

Study on matching property of supports and stiffeneron circular exhaust duct

QI Jinsheng1, AN Chunguo1, BAI Jie2, WANG Zhan3*   

  1. 1. Shandong Electric Power Engineering Consulting Institute Corp. Ltd, Jinan 250013, Shandong, China;
    2. School of Civil Engineering, Shandong University, Jinan 250061, Shandong, China;
    3. School of Energy and Power Engineering, Shandong University, Jinan 250061, Shandong, China
  • Received:2016-07-14 Online:2017-02-20 Published:2016-07-14

PDF (PC)

1097

Abstract: The matching property of saddle support and stiffener on circular exhaust duct was studied, and the optimal position of heavy stiffener and saddle supports were determined by the finite element method(FEM). The results showed that the use of pure saddle supports might lead to stress concentration on the contact area of saddle and duct, meanwhile the maximum stress could exceed the allowable stress. The heavy stiffener near the supports could decrease the deformation and increase the buckling factor, while could hardly decrease the maximum stress. Saddle supports under the heavy stiffener could obviously decrease the deformation and increase the buckling factor, and could decrease the stress on the contact area of support and duct so that would meet the need of long-term security. The influence of wrap-angle to the stress concentration and buckling property was not obvious.

Key words: circular exhaust duct, finite element method, stiffener, heavy stiffener, saddle support, matching

CLC Number: 

  • TK225
[1] 钱成续. 火力发电厂烟风煤粉管道技术规程配套设计计算方法[M]. 北京: 中国电力出版社, 2004.
[2] 中国电力企业联合会. 电厂动力管道设计规范:GB 50764—2012[S]. 北京: 中国计划出版社, 2012.
[3] 董祖成. 300 MW机组W型火焰锅炉二次风道改造[J]. 热力发电, 2008, 37(8): 40-44. DONG Zucheng. Retrofit of secondary air duct for W-shaped flame boiler of 300MW unit[J]. Thermal Power Generation, 2008, 37(8):40-44.
[4] 赵经濂, 傅文玲, 杨虹. 脱硫烟道壁厚及其加固肋设计优化探讨[J]. 电力设备, 2005, 6(11):70-72. ZHAO Jinglian, FU Wenling, YANG Hong. Research on the optimum design of FGD flue thickness and its reinforcement[J]. Electrical Equipment, 2005, 6(11):70-72.
[5] 邓海文. 烟风道加固肋组合截面特性计算[J]. 湖北电力, 2011, 35(1): 52-53, 67. DENG Haiwen. Reaserch on calculation of air & flue gas ducts stiffener combination section characteristic[J]. Hubei Electric Power, 2011, 35(1): 52-53, 67.
[6] 王欣, 郭小明, 张辉, 等. 火力发电厂烟风煤粉管道加固肋设计计算分析[J]. 电力科学与工程, 2006(3): 17-20. WANG Xin, GUO Xiaoming, ZHANG Hui, et al. Design analysis of stiffening ribs for air, flue gas and pulverized coal piping in thermal power plants[J]. Power Science and Engineering, 2006(3): 17-20.
[7] 周锐. 大容量机组圆形烟道设计特点[J]. 发电设备, 2010, 24(3):190-192. ZHOU Rui. Design features of circular flues for large capacity power units[J]. Power Equipment, 2010, 24(3):190-192.
[8] 侯庆伟, 石桂荣, 李勇臣, 等. 湿法烟气脱硫系统的pH值及控制步骤分析[J]. 山东大学学报(工学版), 2005, 35(5): 37-40. HOU Qingwei, SHI Guirong, LI Yongchen, et al. Analysis on pH value and control step in wet flue gas desulfurization[J]. Journal of Shandong University(Engineering Science), 2005, 35(5):37-40.
[9] 王乃华. 快速悬浮床烟气脱硫[J]. 山东大学学报(工学版), 2003, 33(5): 502-506. WANG Naihua. Flue gas desulfurization of fast suspension bed[J]. Journal of Shandong University(Engineering Science), 2003, 33(5):502-506.
[10] 石亚超, 朱桂明, 郝若锦, 等. 圆形烟道在烟气脱硫脱硝装置中的应用探讨[J]. 化工机械, 2013, 40(3): 369-372. SHI Yachao, ZHU Guiming, HAO Ruojin, et al. Research on circular flue application in flue gas desulfurization system[J]. Chemical Machinery, 2013, 40(3): 369-372.
[11] 袁江涛. 火电厂圆形烟风道设计中的有限元分析方法[D]. 重庆: 重庆大学, 2011. YUAN Jiangtao. Finite element method in design of circular exhaust duct of thermal power unit[D]. Chongqing: Chongqing University, 2011.
[12] 胡位勇. 基于ABAQUS的圆形烟风管道有限元建模及计算软件二次开发[D]. 重庆: 重庆大学, 2013. HU Weiyong. Finite element modeling and secondary development on circular exhaust duct based on ABAQUS[D]. Chongqing: Chongqing University, 2013.
[13] 郭娟丽. ANSYS在电厂烟风道设计中的应用[J]. 电力勘测设计, 2015, 4(8):38-41. GUO Juanli. Application of ANSYS to flue gas and air duct design in power plant[J]. Electric Power Survey & Design, 2015, 4(8):38-41.
[14] 周俊. 圆形烟风道与节能降耗[J]. 江苏锅炉, 2010(4): 40-42. ZHOU Jun. Circular exhaust duct and energy saving[J]. Jiangsu Boiler, 2010(4): 40-42.
[15] BODNER S R. General instability of a ring-stiffened, circular cylindrical shell under hydrostatic pressure[J]. Journal of Applied Mechanics, 1957(24): 269-277.
[16] 冯若愚, 陈瑛, 柏洁. 水平圆柱薄壳非轴对称荷载作用内力分析[J]. 力学与实践, 2016, 38(5): 531-537. FENG Ruoyu, CHEN Ying, BAI Jie. Force analysis of thin-walled horizontal circular cylindrical shell under non-axisymmetric loading[J]. Mechanics in Engineering, 2016, 38(5): 531-537.
[17] 张翼, 张晋军. 鞍座包角和宽度对双支座卧式容器筒体应力分布影响的研究[J]. 化工设备与管道, 2008, 45(6):7-11. ZHANG Yi, ZHANG Jinjun. Study of influence of contact angle and width of saddle to stress distribution in horizontal vessel with double saddles[J]. Process Equipment and Piping, 2008, 45(6):7-11.
[18] 钮树强. 鞍座设置对大型卧式容器筒体受力的影响分析[D].杭州:浙江工业大学,2013. NIU Shuqiang. Analysis of influence of saddle setting on the cylinder stress of large horizontal vessels[D]. Hangzhou: Zhejiang University of Technology, 2013.
[19] 全国压力容器标准化技术委员会. 容器支座 第一部分: 鞍式支座:JB/T 4712.1—2007[S]. 北京: 中国标准出版社, 2007.
[20] 全国钢标准化技术委员会. 热轧型钢:GB/T 706—2008[S]. 北京: 中国标准出版社, 2008.
[1] SUO Daxiang, LI Bo. Photovoltaic defect detection based on fine-grained feature enhancement and scale matching [J]. Journal of Shandong University(Engineering Science), 2025, 55(4): 9-17.
[2] WANG Xufeng, ZHOU Di, ZHANG Fenglei, SONG Xuemeng, LIU Meng. Multi-granularity alignment network for image-text matching [J]. Journal of Shandong University(Engineering Science), 2025, 55(4): 29-39.
[3] Qiuling LI,Baomin SHAO,Lei ZHAO,Zhen WANG,Xue JIANG. Key frame extraction based on ViBe algorithm for motion feature extraction [J]. Journal of Shandong University(Engineering Science), 2020, 50(1): 8-13.
[4] Chengxin YU,Guojian ZHANG,Yongqian ZHAO,Xiaodong LIU,Xinhua DING,Tonglong ZHAO. Bridge monitoring and warning system based on digital measurement technology [J]. Journal of Shandong University(Engineering Science), 2020, 50(1): 115-122.
[5] Youming TANG,Kun DONG,Yuanwei ZHANG. Design and verification of power system for ECVT hybrid electric city bus [J]. Journal of Shandong University(Engineering Science), 2019, 49(6): 98-106.
[6] Xiaoguang WANG,Zhuang HE,Xianfu LI,Ao PAN. Influence of magnetic suspension rotor driving magnetic field on supporting magnetic field [J]. Journal of Shandong University(Engineering Science), 2019, 49(4): 86-92.
[7] Wenwen QUAN,Mingxing LIN. Algorithm of underwater target recognition based on CNN features with BOF [J]. Journal of Shandong University(Engineering Science), 2019, 49(1): 107-113.
[8] Longlin WANG,Xundong HU,Jinsheng QI,Chunguo AN,Zhan WANG. Influence of internal pressure on the safety of exhaust duct under multiple loads [J]. Journal of Shandong University(Engineering Science), 2018, 48(6): 116-121.
[9] Dongbo ZHANG,Tao KOU,Haixia XU. Fast scene recognition based on LDB descriptor and local spatial structure matching [J]. Journal of Shandong University(Engineering Science), 2018, 48(5): 16-23.
[10] DING Xiaoling, ZHAO Qiang, LI Yibin, MA Xin. Modified target recognition algorithm based on template matching [J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2018, 48(2): 1-7.
[11] WEI Bengang, GUO Ruochen, HUANG Hua, WANG Zhen, LIU Pengcheng, ZHANG Yuying, LI Kejun, LOU Jie. Simulation and analysis of two dimensional temperature field of the discrete cooling system transformer based on the finite element method [J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2017, 47(6): 63-69.
[12] JIN Peipei, SUN Fengrong, LIU Fanglei, YAO Guihua. Cardiac cycle estimation of echocardiography with speckle tracking [J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2017, 47(2): 94-99.
[13] LU Yuefeng, ZHANG Kui, LIU Shuo, WU Yue, ZHAO Shuo, LI Qiang, FENG Chen. A vector data matching algorithm based on slope difference and azimuth [J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2016, 46(6): 31-39.
[14] ZHU Jie, WANG Jing, LIU Fei, GAO Guandong, DUAN Qing. Object classification method based on component pyramid matching [J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2016, 46(2): 14-21.
[15] ZENG Bi, MAO Qin. Improved indoor 3-D fuzzy position fingerprint localization algorithm [J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2015, 45(3): 22-27.
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed   
[1] WANG Su-yu,<\sup>,AI Xing<\sup>,ZHAO Jun<\sup>,LI Zuo-li<\sup>,LIU Zeng-wen<\sup> . Milling force prediction model for highspeed end milling 3Cr2Mo steel[J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2006, 36(1): 1 -5 .
[2] QIN Tong, SUN Fengrong*, WANG Limei, WANG Qinghao, LI Xincai. 3D surface reconstruction using the shape based interpolation guided by maximal discs[J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2010, 40(3): 1 -5 .
[3] LIU Wen-liang, ZHU Wei-hong, CHEN Di, ZHANG Hong-quan. Detection and tracking of moving targets using the morphology match in radar images[J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2010, 40(3): 31 -36 .
[4] SUN Cong-zheng,GUAN Cong-sheng,QIN Jing-yu,CHENG Chuan . The structure and performances of the electroless Ni-P alloy coating on aluminum alloy[J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2007, 37(5): 108 -112 .
[5] XIA Bin,ZHANG Lian-jun . Energy comparison-based TOA estimation algorithm for the DS-CDMA UWB system[J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2007, 37(1): 70 -73 .
[6] LIU Xin 1, SONG Sili 1, WANG Xinhong 2. [J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2009, 39(2): 98 -100 .
[7] . [J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2009, 39(2): 108 -112 .
[8] CHEN Huaxin, CHEN Shuanfa, WANG Binggang. The aging behavior and mechanism of base asphalts[J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2009, 39(2): 125 -130 .
[9] XUE Qiang,AI Xing,ZHAO Jun,ZHOU Yong-hui,YUAN Xun-liang . Effects of TiC nano-sized particle on the microstructure and properties of Si3N4 composite ceramics[J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2008, 38(3): 69 -72 .
[10] ZHAO Ke-Jun, WANG Xin-Jun, LIU Xiang, CHOU Yi-Hong. Algorithms of continuous top-k join query over structured overlay networks[J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2009, 39(5): 32 -37 .
Copyright 2018 © Editorial office of Journal of Shandong University (Engineering Science)
Supported by Beijing Magtech Co.Ltd