JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE) ›› 2017, Vol. 47 ›› Issue (1): 90-96.doi: 10.6040/j.issn.1672-3961.0.2016.081

Previous Articles     Next Articles

The influence of indentation on the surface residual stress of stainless steel

SU Chenggong1,2, LIU Yan1,2, WANG Weiqiang1,2*, WANG Yuhua3   

  1. 1. School of Mechanical Engineering, Shandong University, Jinan 250061, Shandong, China;
    2. Engineering and Technology Research Center for Special Equipment Safety of Shandong Province, Jinan 250061, Shandong, China;
    3. Henghe Machinery Manufacturing Co., Ltd. of Shandong Provence, Zibo 255000, Shandong, China
  • Received:2016-03-07 Online:2017-02-20 Published:2016-03-07

PDF (PC)

458

Abstract: In order to obtain the residual stress distribution around the residual indentation, the austenitic stainless steel sheets of S30408, S32168, S31603 and S30403 were chosen as the research materials. The constitutive relations of the materials were acquired by the tensile tests, and the force-depth curves were obtained by the ABI tests. The ABI process was simulated by finite element software ABAQUS; The results showed that the maximum value of the residual stress under Mises stress state is about 700 MPa, and the residual stress exists within the area of 1.3% of the ball radius. In addition, the stress concentration around the indentation under the action of external tensile load was studied. The results showed that the maximum superposition stress appears in the indentation materials accumulating area, and the influence range in the thickness direction was limited within 6% of the influence radius.

Key words: automated ball indentation, mechanical properties of materials, finite element, residual stress, stress concentration

CLC Number: 

  • TG115.5
[1] HERTZ H. Über die berührung fester elastischer körper[J]. Reine and Angewandte Mathematik, 1882, 1882(92):156-171.
[2] TABOR D. The hardness of solids[J]. Review of Physics in Technology, 1970, 1(3):145-179.
[3] MEYER E. Contribution to the knowledge of hardness and hardness testing[J]. Zeitschrift Des Vereines Deutscher Ingenieure, 1908, 52:740-835.
[4] HAGGAG F M. Field indentation microprobe for structural integrity evaluation: USA, 4,852,397[P]. 1989-08-01.
[5] HAGGAG F M, NANSTAD R K, BRASKI D N. Structural integrity evaluation based on an innovative field indentation microprobe[C] // ASME Pressure Vessel and Piping Conference. Honolulu, USA:[s.n.] , 1989.
[6] HAGGAG F M. Indentation technique provides pipeline integrity monitoring[J]. Oil & Gas Journal, 2006, 104(30):58-62.
[7] HARSHI K K, KAMAL S, RAHUL C. Mechanical property estimation of similar weld using ball indentation technique[J]. Journal of Minerals and Materials Characterization and Engineering, 2012, 11(11):1095-1100.
[8] JIA Y F, XUAN F Z. Anisotropic fatigue behavior of human enamel characterized by multi-cycling nanoindentation[J]. Journal of the Mechanical Behavior of Biomedical Materials, 2012, 16(16):163-168.
[9] YANG F, LI J C M. Impression test—a review[J]. Materials Science and Engineering, 2013, 74(8):233-253.
[10] 汤杰, 王威强, 苏成功, 等.连续球压痕法测试压力容器用钢力学性能的研究[J].振动、测试与诊断,2015,35(2):281-288. TANG Jie, WANG Weiqiang, SU Chenggong, et al. Research on the measurement of mechanical properties of pressure vessel steels through continuous ball indentation test[J]. Journal of Vibration, Measurement and Diagnosis, 2015, 35(2):281-288.
[11] 中华人民共和国国家质量技术监督局. 钢及钢产品力学性能试验取样位置及试样制备 GB/T 2975—1998[S]. 北京:中国标准出版社,1998.
[12] 中华人民共和国国家质量监督检验检疫总局. 金属材料拉伸试验第1部分:室温试验方法 GB/T 228.1—2010[S]. 北京:中国标准出版社,2011.
[13] 杨伯源, 张义同. 工程弹塑性力学[M]. 北京: 机械工业出版社, 2003:192.
[14] 石亦平,周玉蓉. ABAQUS有限元分析实例详解[M].北京:机械工业出版社,2010:167.
[15] HAGGAG F M. In-service nondestructive measurements of stress-strain curves and fracture toughness of oil and gas pipelines: examples of fitness-for-purpose applications[C] // Proceedings of the 5th International Conference on Pipeline Rehabilitation & Maintenance, Bahrain: Det Norske Veritas, 2002.
[16] 苏成功.不锈钢性能测试的自动球压痕试验法研究[D]. 济南:山东大学,2015. SU Chenggong. Research on the evaluation of stainless steel properties by automated indentation testing method[D]. Jinan: Shandong University, 2015.
[17] 航空工业部科学技术委员会.应力集中系数手册[M]. 北京:高等教育出版社,1990:154.
[1] LI Lianxiang, CHE Xiuxi, LI Weilong, QIU Yefan, ZHANG Shangru, WANG Chuhan. Working mechanism and calculation analysis of RECV pile for permanent support of deep foundation pit [J]. Journal of Shandong University(Engineering Science), 2025, 55(6): 108-119.
[2] Xuhao WANG,Qianqian LIU,Hucheng LI,cheng LI,Peng LI,Yifeng LING. Research and optimization of hollow form of precast concrete pavement slab [J]. Journal of Shandong University(Engineering Science), 2022, 52(4): 139-150.
[3] Xiuguang SONG, He YANG, Xiaoyan CHEN, Wenjie CUI, Hongya YUE, Kai ZHANG, Juan TIAN. Ultimate uplift capacity of shallow vertical plate anchors in sand [J]. Journal of Shandong University(Engineering Science), 2021, 51(1): 24-31.
[4] HAN Jiazhen, WANG Yong, XIE Yudong, WANG Qixian, ZHANG Xinbiao, GAO Wenbin, LI Ronglan, ZHANG Chuanjun. Mechanical characteristics for deep sea wet-mate electrical connectors [J]. Journal of Shandong University(Engineering Science), 2020, 50(6): 30-39.
[5] LIN Chao, ZHANG Chenglin, WANG Yong. Design and mechanical properties of prestressed hollow bar [J]. Journal of Shandong University(Engineering Science), 2020, 50(5): 26-32.
[6] Xiaoguang WANG,Zhuang HE,Xianfu LI,Ao PAN. Influence of magnetic suspension rotor driving magnetic field on supporting magnetic field [J]. Journal of Shandong University(Engineering Science), 2019, 49(4): 86-92.
[7] Longlin WANG,Xundong HU,Jinsheng QI,Chunguo AN,Zhan WANG. Influence of internal pressure on the safety of exhaust duct under multiple loads [J]. Journal of Shandong University(Engineering Science), 2018, 48(6): 116-121.
[8] CHEN Rui, LI Hongwei, TIAN Jing. The relationship between the number of magnetic poles and the bearing capacity of radial magnetic bearing [J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2018, 48(2): 81-85.
[9] XU Mingsan, WANG Tao, LI Jianfeng, DAI Tengyun. Performance of W6Mo5Cr4V2 laser cladding on 40Cr curved substrate [J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2018, 48(1): 57-64.
[10] WEI Bengang, GUO Ruochen, HUANG Hua, WANG Zhen, LIU Pengcheng, ZHANG Yuying, LI Kejun, LOU Jie. Simulation and analysis of two dimensional temperature field of the discrete cooling system transformer based on the finite element method [J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2017, 47(6): 63-69.
[11] YANG Yan, WANG Weiqiang, PAN Lu, SONG Mingda. 16Mn pipe strain aging after service by automatic ball indentation test [J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2017, 47(4): 64-69.
[12] QI Jinsheng, AN Chunguo, BAI Jie, WANG Zhan. Study on matching property of supports and stiffeneron circular exhaust duct [J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2017, 47(1): 125-130.
[13] LYU Guoren, ZHANG Qun, NIU Ben, GAO Quanting, WU Zhaoshou. The effects of pile foundation of high-rise building on adjacent structures [J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2017, 47(1): 48-58.
[14] ZHANG Wanzhi, LIU Hua, ZHANG Feng, GAO Lei, YAO Chen, LIU Guanzhi. Mechanical properties of tower and beam synchronous construction of cable-stayed bridge [J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2016, 46(6): 120-126.
[15] LEI Zhengbao, LIAO Zhuo, LIU Zhuchun. Optimized design of cross-wound cable barrier end anchorage [J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2016, 46(3): 93-98.
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed   
[1] ZHANG Yong-hua,WANG An-ling,LIU Fu-ping . The reflected phase angle of low frequent inhomogeneous[J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2006, 36(2): 22 -25 .
[2] LI Kan . Empolder and implement of the embedded weld control system[J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2008, 38(4): 37 -41 .
[3] KONG Xiang-zhen,LIU Yan-jun,WANG Yong,ZHAO Xiu-hua . Compensation and simulation for the deadband of the pneumatic proportional valve[J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2006, 36(1): 99 -102 .
[4] LAI Xiang . The global domain of attraction for a kind of MKdV equations[J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2006, 36(1): 87 -92 .
[5] YU Jia yuan1, TIAN Jin ting1, ZHU Qiang zhong2. Computational intelligence and its application in psychology[J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2009, 39(1): 1 -5 .
[6] CHEN Rui, LI Hongwei, TIAN Jing. The relationship between the number of magnetic poles and the bearing capacity of radial magnetic bearing[J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2018, 48(2): 81 -85 .
[7] WANG Bo,WANG Ning-sheng . Automatic generation and combinatory optimization of disassembly sequence for mechanical-electric assembly[J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2006, 36(2): 52 -57 .
[8] JI Tao,GAO Xu/sup>,SUN Tong-jing,XUE Yong-duan/sup>,XU Bing-yin/sup> . Characteristic analysis of fault generated traveling waves in 10 Kv automatic blocking and continuous power transmission lines[J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2006, 36(2): 111 -116 .
[9] QIN Tong, SUN Fengrong*, WANG Limei, WANG Qinghao, LI Xincai. 3D surface reconstruction using the shape based interpolation guided by maximal discs[J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2010, 40(3): 1 -5 .
[10] ZHANG Ying,LANG Yongmei,ZHAO Yuxiao,ZHANG Jianda,QIAO Peng,LI Shanping . Research on technique of aerobic granular sludge cultivationby seeding EGSB anaerobic granular sludge[J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2006, 36(4): 56 -59 .
Copyright 2018 © Editorial office of Journal of Shandong University (Engineering Science)
Supported by Beijing Magtech Co.Ltd