JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE) ›› 2011, Vol. 41 ›› Issue (5): 121-126.

• Articles • Previous Articles     Next Articles

Research on control system and test of full-scale highway accelerated loading testing

GUAN Zhi-guang1,2, LIN Ming-xing1*, WANG Xu-guang2, ZHANG Ji-wei2   

  1. 1. School of Mechanical Engineering, Shandong University, Jinan 250061, China;
    2. Department of Mechanical Engineering, Shandong Jiaotong University, Jinan 250023, China
  • Received:2010-10-25 Online:2011-10-16 Published:2010-10-25

PDF (PC)

1558

Abstract:

The facility of the full-scale highway accelerated loading testing(ALT) was developed, which has self-owned intellectual property. The control system was studied and designed for the full-scale ALT facility, and  the pavement experiment was analyzed. The ALT control system adopted CAN bus, which can improve reliability. The circulating-type and single direction loading can be realized by vectorcontrol of the inverter. The tested pavement can produce rutting and mild fatigue in a compressed time period, which can help analysis the failure mechanism of the life cycle and can also offer reference for the road design, construction and acceptance. The relationship of dynamic pavement response with load, speed and tire pressure was  researched using the facility. The results showed that there was not only tensile strain but also compressive strain at the bottom of the asphalt layer; furthermore, the variation of tensile strain was bigger than compressive strain, while the change trend reduced with the speed increasing.

Key words: full-scale, highway accelerated loading testing(ALT), CAN bus, load, strai

[1] XU Run, LIU Zhikun, SUN Jianxiu, YU Yang, ZHANG Changyong, LIU Yazhen, YUE Hongya, ZHANG Hongbo. Bearing characteristics of dispersed piles with radial constraints from waste tire grids [J]. Journal of Shandong University(Engineering Science), 2025, 55(6): 142-150.
[2] ZHANG Yumin, LI Jingrui, YANG Ming, JI Xingquan, SUN Donglei, XU Bo, WU Fucheng. Robust unit commitment model with multi-energy coupled system considering gas-heat network dynamics [J]. Journal of Shandong University(Engineering Science), 2025, 55(5): 18-29.
[3] DENG Bin, ZHANG Zongbao, ZHAO Wenmeng, LUO Xinhang, WU Qiuwei. Cloud-edge collaborative and graph neural network based load forecasting method for electric vehicle charging stations [J]. Journal of Shandong University(Engineering Science), 2025, 55(5): 62-69.
[4] SUN Zhongqing, LAI Yening, ZHANG Jian, CAO Xuening, ZHANG Hengxu. Coordinated control strategies for energy storage and other controllable resources in power system emergencies [J]. Journal of Shandong University(Engineering Science), 2025, 55(5): 78-87.
[5] ZHANG Guojian, FU Lianlong, ZHANG Qingsong, SANG Wengang, LI Jianqiang, ZHOU Lu, FU Tao, LIU Shengzhen. Dynamic deformation law monitoring of extra-long span bridges based on GB-RAR technology [J]. Journal of Shandong University(Engineering Science), 2025, 55(4): 127-137.
[6] ZHENG Fangyuan, CHEN Lizheng, WANG Wenkui, ZHANG Hanyuan, FAN Yingle. Intelligent building energy optimization considering user satisfaction [J]. Journal of Shandong University(Engineering Science), 2025, 55(2): 45-57.
[7] Peng WANG, Cheng HUANG, Guohao ZHAO, Feng ZHANG. Experiment of the model of hydration heat temperature field and strain field of concrete single box and three chamber girder [J]. Journal of Shandong University(Engineering Science), 2024, 54(1): 109-122.
[8] Haotian LUO,Ke WU,Yameng LI,Jiaxiang XU,Zhihao XING. Horizontal bearing capacity of suction bucket foundation under wave dynamic load [J]. Journal of Shandong University(Engineering Science), 2021, 51(5): 100-106.
[9] GONG Weiping, GUAN Hongjun, LI Hongwei, LIU Jieben, SHI Yuetao. Optimization of heating load distribution of combined unit based on EBSILON simulation software [J]. Journal of Shandong University(Engineering Science), 2021, 51(4): 77-83.
[10] Xiaoyan QI,Hengjie LIU,Qiuhua HOU,Xiaoyu LIU,Yanchao TAN,Liancheng WANG. Short-term load forecasting of iron and steel industry area based on combination model of SVM and LSTM [J]. Journal of Shandong University(Engineering Science), 2021, 51(4): 91-98.
[11] XU Zhen, ZHANG Tao, GE Xiangdong, GAO Feng, ZHANG Laiyi, ZHANG Xin, TIAN Li. Uncertainty analysis of transmission tower-line system under wind load [J]. Journal of Shandong University(Engineering Science), 2021, 51(4): 99-105.
[12] XIE Ziqi, WANG Lihong, LI Man. Active learning of pairwise constraints in block diagonal subspace clustering [J]. Journal of Shandong University(Engineering Science), 2021, 51(2): 65-73.
[13] Zhuoyu XIAO,Pei HE,Guo CHEN,Yunbiao XU,Jie GUO. Design pattern classification mining with feature metrics constraints [J]. Journal of Shandong University(Engineering Science), 2020, 50(6): 48-58.
[14] Jialin SU,Yuanzhuo WANG,Xiaolong JIN,Xueqi CHENG. Entity alignment method based on adaptive attribute selection [J]. Journal of Shandong University(Engineering Science), 2020, 50(1): 14-20.
[15] Meng LIU,Dingyi CHENG,Wen ZHANG,Hengxu ZHANG,Kuan LI,Guohui ZHANG,Jianjun SU. Discussion on emergency control of central air conditioner at large receiving-end grid to cope with HVDC blocking fault [J]. Journal of Shandong University(Engineering Science), 2020, 50(1): 72-81.
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed   
[1] WANG Su-yu,<\sup>,AI Xing<\sup>,ZHAO Jun<\sup>,LI Zuo-li<\sup>,LIU Zeng-wen<\sup> . Milling force prediction model for highspeed end milling 3Cr2Mo steel[J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2006, 36(1): 1 -5 .
[2] LI Kan . Empolder and implement of the embedded weld control system[J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2008, 38(4): 37 -41 .
[3] SHI Lai-shun,WAN Zhong-yi . Synthesis and performance evaluation of a novel betaine-type asphalt emulsifier[J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2008, 38(4): 112 -115 .
[4] KONG Xiang-zhen,LIU Yan-jun,WANG Yong,ZHAO Xiu-hua . Compensation and simulation for the deadband of the pneumatic proportional valve[J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2006, 36(1): 99 -102 .
[5] LAI Xiang . The global domain of attraction for a kind of MKdV equations[J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2006, 36(1): 87 -92 .
[6] YU Jia yuan1, TIAN Jin ting1, ZHU Qiang zhong2. Computational intelligence and its application in psychology[J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2009, 39(1): 1 -5 .
[7] CHEN Rui, LI Hongwei, TIAN Jing. The relationship between the number of magnetic poles and the bearing capacity of radial magnetic bearing[J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2018, 48(2): 81 -85 .
[8] WANG Bo,WANG Ning-sheng . Automatic generation and combinatory optimization of disassembly sequence for mechanical-electric assembly[J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2006, 36(2): 52 -57 .
[9] LI Ke,LIU Chang-chun,LI Tong-lei . Medical registration approach using improved maximization of mutual information[J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2006, 36(2): 107 -110 .
[10] JI Tao,GAO Xu/sup>,SUN Tong-jing,XUE Yong-duan/sup>,XU Bing-yin/sup> . Characteristic analysis of fault generated traveling waves in 10 Kv automatic blocking and continuous power transmission lines[J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2006, 36(2): 111 -116 .
Copyright 2018 © Editorial office of Journal of Shandong University (Engineering Science)
Supported by Beijing Magtech Co.Ltd