JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE) ›› 2009, Vol. 39 ›› Issue (4): 87-91.

• Articles • Previous Articles     Next Articles

Research on the suitable support form of deep gob-side entry in fully mechanized top coal caving mining

  

  1.   JING Hong-Wen, XU Guo-An,, ZHANG Chun-Yu：State Key Laboratory for Geomechanics and Deep Underground Engineering, Xuzhou 221008, China;  JING Hong-Wen, XU Guo-An,, ZHANG Chun-Yu： School of Architecture and Civil Engineering, China University of Mining ＆ Technology, Xuzhou 221116, China; QU Tian-Zhi：Yanzhou Coal Co. Ltd., Zoucheng 253710, China
  • Received:2009-05-20 Online:2009-08-24 Published:2009-08-24

PDF (PC)

1346

Abstract:

To provide guidance and basis for the selection of support form and  the design of support parameters of deep gob-side entry,the action mechanisms of two support forms, i.e. I-steel set support and bolt support with wire mesh, bar and cable were analyzed from the aspect of structural mechanics, and then  their supporting effects were investigated by physical simulation in the laboratory. The supporting principle of cable was analyzed based on the interrelation between the key bearing layer and the secondary one. The results showed  that the bolt support with wire mesh, bar and cable was  the perfect support form because it can well meet the requirement of deep gob-side entry for support, and  the primary role of the roof cable is to link the key bearing layer and the secondary one, which can greatly increase the stability of surrounding rocks.

Key words: deep mine; gob-side entry; support form; structure analysis; physical simulation

No related articles found!
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed   
[1] KONG Xiang-zhen,LIU Yan-jun,WANG Yong,ZHAO Xiu-hua . Compensation and simulation for the deadband of the pneumatic proportional valve[J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2006, 36(1): 99 -102 .
[2] . [J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2009, 39(1): 92 -95 .
[3] QU Yan-peng,CHEN Song-ying,LI Chun-feng,WANG Xiao-peng,TENG Shu-ge . [J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2006, 36(4): 16 -20 .
[4] ZHANG Ai-juan. Synthesis of bone-like hydroxyapatite in simulated body fluid[J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2010, 40(3): 86 -90 .
[5] LUO Yun-hu,XING Li-dong,WANG Qin,LIU Hai-chun,WENG Xiao-guang . Coordination of bidding strategies for two kinds of interruptible load reserve markets on demand side[J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2008, 38(3): 77 -80 .
[6] XU Xiaodan, DUAN Zhengjie, CHEN Zhongyu. The sentiment mining method based on extended sentiment dictionary and integrated features[J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2014, 44(6): 15 -18 .
[7] ZHANG Ying-Chun, WANG Zuo-Xun, WANG Gui-Juan. High voltage cable temperature measurement system based on neural network controller[J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2009, 39(5): 62 -67 .
[8] REN Jing-xi,GENG Jin-hua,GAO Qi-sheng . Quality optimization of the multifactor and multi-index product[J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2007, 37(3): 114 -117 .
[9] ZHU Xiang-cai,LUAN Yun-cai,XU Jian . An urban traffic evaluation system based on VB and FTA[J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2007, 37(4): 89 -92 .
[10] LI Xin-Ping, DAI Yi-Fei, HU Jing. Fluid-solid coupling analysis of surrounding rock mass stability and water inflow forecast of a tunnel in a karst zone[J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2009, 39(4): 1 -6 .
Copyright 2018 © Editorial office of Journal of Shandong University (Engineering Science)
Supported by Beijing Magtech Co.Ltd