吸附剂综合性能测试与分析

doi:10.6040/j.issn.1672-3961.0.2016.255

山东大学学报(工学版) ›› 2016, Vol. 46 ›› Issue (5): 120-125.doi: 10.6040/j.issn.1672-3961.0.2016.255

吸附剂综合性能测试与分析

董震¹,赖艳华¹,吕明新²,郑皓宇¹,潘继红¹

1. 山东大学能源与动力工程学院, 山东济南 250061;2.山东大学苏州研究院, 江苏苏州 215028

收稿日期:2016-07-11 出版日期:2016-10-20 发布日期:2016-07-11
通讯作者: 赖艳华(1971— ),女,山东烟台人,教授,博士,主要研究方向为能源高效利用及通用制冷技术.E-mail:laiyh@sdu.edu.cn E-mail:340440776@163.com
作者简介:董震(1985— ),男,河南周口人,博士研究生,主要研究研究方向为吸附剂研发及性能测试,传热传质强化技术.E-mail:340440776@163.com
基金资助:
国家自然科学基金资助项目(51476093);山东省科技发展计划资助项目(2013GGX10403);山东大学自然科学专项资助项目(2014YQ007)

Comprehensive performance test and analysis of adsorbent

DONG Zhen¹, LAI Yanhua¹, LYU Mingxin², ZHENG Haoyu¹, PAN Jihong¹

1.School of Energy and Power Engineering, Shandong University, Jinan 250061, Shandong, China;
2. Suzhou Institute, Shandong University, Suzou 215028, Jiangsu, China

Received:2016-07-11 Online:2016-10-20 Published:2016-07-11

摘要/Abstract

摘要： 为克服定容法测试吸附剂性能误差偏高及应用范围局限性,引入恒温水浴系统降低气温波动导致的测试误差,设计新的反应釜,保证吸附剂反应的均匀性,提高铠装热电偶的灵敏度。结合质量守恒和真实气体方程,获得各部件体积比,利用标准钢球实现系统各部件体积的高精度快速标定。结果表明:相对误差小于0.5%。根据误差传递原理,测试系统的总误差小于2%,满足吸附剂综合性能测试与分析。基于卤化盐吸附剂特性分析,设计新的平衡态、动力学及衰减性测试方法,通过对氯化钙及其复合吸附剂测试,获得吸附剂的平衡态连续曲线及伪平衡区,实现了变温变压过程动力学及温度曲线测试及定性定量分析,完成多次循环后吸附动力学曲线和最大吸附量测定及吸附剂抗衰减能力分析,扩展定容法的应用范围,证实测试系统及测试方法的可行性,为吸附剂快速研发提供简单高效的测试理论和分析方法。

关键词: 平衡态, 衰减性, 体积标定, 定容法, 动力学, 吸附剂

Abstract: In order to overcome the limitations and measurement errors of adsorption performance by volumetric method, thermostatic water-bath was inducted to reduce measurement errors caused by temperatures fluctuation of gas tank and gas condensation. Uniform reaction and highly sensitive sheathed thermocouple was realized by a novel reactor. Volume of each part was accurately calibrated by precise bearing steel-balls, and relative error of volume was not more than 0.5%. Based on error impress principle,relative error of the measuring system was lower than 2%, and comprehensive performance test and analysis of adsorbent was satisfied.According to principle of volumetric method and adsorption characteristics of alkali halide salts, the new test processes of equilibrium state, kinetic and decay were designed, and were used to test ad-/desorption performance of CaCl₂ and its composite adsorbents. The equilibrium curves and pseudo equilibrium area were obtained. Tests of ad-/desorption kinetics and temperature curves during temperature and pressure changes, and methods of quantitative and qualitative analyses were achieved. Adsorption kinetics curves and maximal adsorption capacity after variant ad-/desorption cycles were given. Application range of volumetric method was extended. Feasibility of measuring system and test processes was confirmed, which could provide highly efficient testing theory and analyze methods in the research process of adsorbent.

Key words: adsorbent, volume calibration, kinetics, volumetric method, decay, equilibrium state

中图分类号:

TK124

董震,赖艳华,吕明新,郑皓宇,潘继红. 吸附剂综合性能测试与分析[J]. 山东大学学报(工学版), 2016, 46(5): 120-125.

DONG Zhen, LAI Yanhua, LYU Mingxin, ZHENG Haoyu, PAN Jihong. Comprehensive performance test and analysis of adsorbent[J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2016, 46(5): 120-125.

参考文献

[1] LIU C Y, AIKA K I. Ammonia absorption on alkaline earth halides as ammonia separation and storage procedure[J]. Bulletin of the Chemical Society of Japan, 2004, 77(1):123-131.
[2] ULLAH K R, SAIDUR R, PING H W, et al. A review of solar thermal refrigeration and cooling methods[J]. Renewable and Sustainable Energy Reviews, 2013, 24(1):499-513.
[3] WANG L W, WANG R Z, OLIVEIRA R G. A review on adsorption working pairs for refrigeration[J] Renewable and Sustainable Energy Reviews, 2009, 13(3):518-534.
[4] YU N, WANG R Z, WANG L W. Sorption thermal storage for solar energy[J]. Progress in Energy and Combustion Science, 2013, 39(5):489-514.
[5] TSO C Y, CHAO Y H. Activated carbon, silica-gel and calcium chloride composite adsorbents for energy efficient solar adsorption cooling and dehumidification systems[J]. International Journal of Refrigeration, 2012, 35(6):1626-1638.
[6] WANG L, WANG R, WU J, et al. Research on the chemical adsorption precursor state of CaCl₂-NH₃ for adsorption refrigeration[J]. Science in China Series E: Technological Sciences, 2005, 48(1):70-82.
[7] BEVERS E R T, OONK H A J, HAIJE W G, et al. Investigation of thermodynamic properties of magnesium chloride amines by HPDSC and TG[J]. Journal of Thermal Analysis and Calorimetry, 2007, 90(3):923-929.
[8] CHENG H H, DENG X X, LI S L, et al. Design of PC based high pressure hydrogen absorption/desorption apparatus[J]. International Journal of Hydrogen Energy, 2007, 32(14):3046-3053.
[9] 杨福胜, 王玉琪, 孟翔宇, 等. 金属氢化物氢化/脱氢反应动力学测量技术研究进展[J]. 化工进展, 2009, 28(1):110-116. YANG Fusheng, WANG Yuqi, MENG Xiangyu, et al. Progress of experimental techniques for kinetic measurement of absorption/desorption in metal hydride system[J]. Chemical Industry and Engineering Progress, 2009, 28(1):110-116.
[10] 程宏辉, 李文彪, 李超, 等. 容量法材料吸放氢性能测试技术研究进展[J]. 煤炭技术, 2014, 33(2):151-155. CHENG Honghui, LI Wenbiao, LI Chao, et al. Progress of volumetric measurement technologies for hydrogen sorption/desorption properties of materials[J]. Coal Technology, 2014, 33(2):151-155.
[11] RAMAPRABHU S, RAJALAKSHMI N, WEISS A. Design and development of hydrogen absorption/desorption high pressure apparatus based on the pressure reduction method[J]. International Journal of Hydrogen Energy, 1998, 23(9):797-801.
[12] ZHONG Y, CRITOPH R, THORPE R, et al. Isothermal sorption characteristics of the BaCl₂—NH₃ pair in a vermiculite host matrix[J]. Applied Thermal Engineering, 2007, 27(14-15):2455-2462.
[13] MAZET N, AMOUROUX M, SPINNER B. Analysis and experimental study of the lnmfonnation of non-isothermal solid/gas reacting medium[J] Chemical Engineering Communication, 1991, 99:155-174.
[14] GOETZ V, MARTY A A model for reversible solid-gas reactions submitted to temperature and pressure constraints: simulation of the rate of reaction in solid-gas reactor used as chemical heat pump[J] Chemical Engineering Science, 1992, 47(17-18):4445-4454.
[15] LI Q, CHOU K C, XU K D, et al. Determination and interpretation of the hydriding and dehydriding kinetics in mechanically alloyed LaNiMg17 composite[J] Journal of Alloys and Compounds, 2005, 387(1-2):86-89.
[16] 花磊, 杨福胜, 孟翔宇,等. 金属氢化物氢化/脱氢反应动力学模型研究进展[J]. 化工进展, 2010, 29(3):413-418. HUA Lei, YANG Fusheng, MENG Xiangyu, et al. Progress in kinetic models for hydrogenation/dehydrogenation of metal hydrides[J]. Chemical Industry and Engineering Progress, 2010, 29(3):413-418.
[17] LI S L, WU J Y, XIA Z Z, et al. Study on the adsorption isosteres of the composite adsorbent CaCl₂ and expanded graphite[J]. Energy Conversion and Management, 2011, 52(2):1501-1506.
[18] WANG Ruzhu, WANG Liwei, WU Jingyi. Adsorption refrigeration technology: theory and application[M]. New Jersey, USA: John Wiley & Sons, 2014, 550:18-25.

多维度评价

Viewed

Full text

Abstract

Cited

Shared

Discussed

吸附剂综合性能测试与分析

Comprehensive performance test and analysis of adsorbent

PDF (PC)

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

多维度评价

本文评价

推荐阅读 10

[1]	胡涛涛,李禹,高咸超. 考虑应变率和层理倾角的炭质板岩动力学特性及本构模型[J]. 山东大学学报 (工学版), 2024, 54(5): 122-131.
[2]	陈榕,魏彤,郝冬雪,武科,郭瑞峰. 重金属Cu(Ⅱ)在球黏土中的吸附特性[J]. 山东大学学报 (工学版), 2023, 53(1): 60-67.
[3]	陈龙,支鹏飞,李晋,陈宏斌,何兆益,崔新壮. 新旧沥青界面融合实测与耗散粒子动力学模拟[J]. 山东大学学报 (工学版), 2022, 52(3): 61-69.
[4]	郑玉珍,孙波. 基于NaHSO₃活化KMnO₄原位生成三价锰的有机污染物降解[J]. 山东大学学报 (工学版), 2022, 52(3): 117-126.
[5]	耿麒,张俊杰,汪珂,路宇峰,谢立扬,叶敏. 基于FEM-SPH耦合的TBM滚刀切削仿真与试验研究[J]. 山东大学学报 (工学版), 2022, 52(1): 93-102.
[6]	朱向前,魏峥嵘,裴彦良,于凯本,宗乐. 深拖地震线列阵的动力学建模与位置预报[J]. 山东大学学报 (工学版), 2020, 50(6): 9-16.
[7]	黄淑亭,翟晓宇,刘延俊,史宏达. 淹没深度对三自由度波能浮子获能的影响[J]. 山东大学学报 (工学版), 2020, 50(6): 17-22.
[8]	任昭鹏, 奚瑞, 王生海, 张志江, 陈海泉. 船用起重机三索限位式防摇摆装置设计[J]. 山东大学学报 (工学版), 2020, 50(3): 125-132.
[9]	胡浩威, 刘爽, 方廷勇. 纳米结构中浸入特性的非平衡分子动力学模拟[J]. 山东大学学报 (工学版), 2019, 49(4): 108-114.
[10]	张宇磊,王勇,谢玉东,孙光,王艳芸,韩家桢. 新型液态金属磁流体发电动力学特性数值模拟[J]. 山东大学学报 (工学版), 2019, 49(1): 101-106.
[11]	肖迪,廉静,纪少波,赵盛晋,徐怀民. 臭氧对甲烷/空气层流火焰传播速度影响规律[J]. 山东大学学报(工学版), 2017, 47(4): 59-63.
[12]	莫正波,胡松涛,胡德栋. 低浓度下亚氯酸钠与盐酸制备二氧化氯的试验研究[J]. 山东大学学报(工学版), 2017, 47(2): 100-105.
[13]	崔青,张长桥,修建新,许士明,卢丽丽. 稠油沥青质胶质降粘机理的分子动力学模拟[J]. 山东大学学报(工学版), 2017, 47(2): 123-130.
[14]	李晓飞,王雷,贾磊,蔡文剑. 斜向和纵向紧凑微流化床设计及其性能[J]. 山东大学学报(工学版), 2016, 46(6): 76-82.
[15]	褚晓东,张荣祥,黄昊怡,唐茂森. 全球能源互联网物理-信息系统协同仿真平台[J]. 山东大学学报(工学版), 2016, 46(4): 103-110.