您的位置:山东大学 -> 科技期刊社 -> 《山东大学学报(工学版)》

山东大学学报(工学版) ›› 2011, Vol. 41 ›› Issue (5): 21-25.

• 刊庆特邀 • 上一篇    下一篇

流体诱导新型弹性管束强化传热实验

田茂诚1, 姜波2,冷学礼1,程林1   

  1. 1. 山东大学能源与动力工程学院, 济南 250061; 2. 山东电力研究院, 济南 250002
  • 收稿日期:2011-08-20 出版日期:2011-10-16 发布日期:2011-08-20
  • 基金资助:

    国家重点基础研究发展计划(2007CB206903);山东省科技攻关项目(2008GG10007009)

Experimental research on heat transfer enhancement characteristics of  a new type of flow-induced elastic tube bundle

TIAN Mao-cheng1, JIANG Bo2, LENG Xue-li1, CHENG lin1   

  1. 1. School of Energy Source and Power Engineering, Shandong University, Jinan 250061, China;
    2. Shandong Electric Power Research Institute, Jinan 250061, China
  • Received:2011-08-20 Online:2011-10-16 Published:2011-08-20

摘要:

为深入研究不同实验条件下新型弹性管束的传热特性,建立了传热综合实验台,计算得到了管束管外、管内及总传热系数随Re的变化曲线图。实验结果表明:新型弹性管束的管外平均表面传热系数基本为同Re数下的固定管束的3倍以上,强化传热效果明显。对比不同条件下的实验结果可以得出,汽-水换热条件最好、水-水换热条件次之、恒热流条件最差。原因为管内流体介质对弹性管束的振动特性影响较大,振动特性增强使得传热特性增强。

关键词: 振动, 强化传热, 弹性管束, 换热器

Abstract:

Comprehensive heat transfer experimental platform was set up to investigate the heat transfer characteristics of a new type elastic tube bundle under different experimental conditions. In the experiment, variations of the external, internal and overall heat transfer coefficients with Reynolds number were obtained. The experimental results show that the average convective heat transfer coefficient outside the tube for the new type elastic tube bundle is 3 times more than that of the stationary tube bundle at the same Reynolds numbers, which indicates a significant heat transfer enhancement. From the comparison of experimental results under different conditions, it can be conclude that the best heat transfer performance can be obtained for the steamwater heat transfer, which is better than that of the waterwater heat transfer, and the constant heat flux heat transfer exhibits the poorest performance. The reason is that the fluid medium inside the tube has great influence on vibration characteristics of the new type elastic tube bundle and the intensification of the tube bundle vibration leads to the enhancement of heat transfer performance. 

Key words: vibration, heat transfer enhancement, elastic tube bundle, heat exchanger

[1] 鲁家彤,张超旭,董晓菲,赵红霞,柏超. 液体循环式热回收系统的模型建立及节能分析[J]. 山东大学学报 (工学版), 2025, 55(4): 149-159.
[2] 张天旭, 刘延俊, 陈云, 薛钢, 王一铭. 海洋温差循环满液式换热器传热计算方法及试验研究[J]. 山东大学学报 (工学版), 2024, 54(6): 167-175.
[3] 郭海坡,文毅然,杨为民,丁万涛. 城市硬岩下地铁隧道管片壁后注浆隔振优化分析[J]. 山东大学学报 (工学版), 2024, 54(4): 95-105.
[4] 柴少波,史杰辉,阿比尔的,刘钦,宋浪. P波入射含顺层结构面岩质边坡引起的振动[J]. 山东大学学报 (工学版), 2023, 53(3): 31-40.
[5] 戚翔,冯翔健,熊骋望,孙子正,张一鸣. 低雷诺数下近自由液面圆柱流致振动数值模拟与机理[J]. 山东大学学报 (工学版), 2022, 52(3): 51-60.
[6] 杜文静,赵浚哲,张立新,王湛,季万祥. 换热器结构发展综述及展望[J]. 山东大学学报 (工学版), 2021, 51(5): 76-83.
[7] 刘欣,杨锋苓. 柔性Rushton桨的振动特性[J]. 山东大学学报 (工学版), 2020, 50(5): 50-55.
[8] 孙连勇,时刚,崔新壮,周明祥,王永军,纪方,闫小东. 饱和地基中单排孔近场隔振的现场试验与数值分析[J]. 山东大学学报 (工学版), 2020, 50(3): 88-97.
[9] 刘涛,田野,马永志. 基于TRNSYS的双U型地埋管换热影响因素分析[J]. 山东大学学报 (工学版), 2019, 49(6): 113-118.
[10] 周慧琳,邱燕. 矩形蓄热单元内石蜡的相变传热特性[J]. 山东大学学报 (工学版), 2019, 49(4): 99-107.
[11] 李超, 王增才, 张万枝, 黄显华, 朱述川, 孟怀. 深井提升尾绳动力学建模及摆动参数分析[J]. 山东大学学报(工学版), 2015, 45(6): 65-70.
[12] 卢丹, 周以齐. 基于EEMD和CWT的挖掘机座椅振动分析[J]. 山东大学学报(工学版), 2015, 45(3): 58-64.
[13] 张涛, 韩吉田, 闫素英, 于泽庭, 周然. 太阳能真空管的热性能分析与测试[J]. 山东大学学报(工学版), 2014, 44(4): 76-83.
[14] 刘波,王有志*,安俊江,王艺霖,袁泉. 车辆—路面空间耦合振动模型及其动力响应分析[J]. 山东大学学报(工学版), 2014, 44(3): 83-89.
[15] 程屾, 孙奉仲*. 渗层不锈钢管束表面真空下换热特性的实验分析[J]. 山东大学学报(工学版), 2014, 44(1): 90-94.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
[1] 王素玉,艾兴,赵军,李作丽,刘增文 . 高速立铣3Cr2Mo模具钢切削力建模及预测[J]. 山东大学学报(工学版), 2006, 36(1): 1 -5 .
[2] 张永花,王安玲,刘福平 . 低频非均匀电磁波在导电界面的反射相角[J]. 山东大学学报(工学版), 2006, 36(2): 22 -25 .
[3] 李 侃 . 嵌入式相贯线焊接控制系统开发与实现[J]. 山东大学学报(工学版), 2008, 38(4): 37 -41 .
[4] 孔祥臻,刘延俊,王勇,赵秀华 . 气动比例阀的死区补偿与仿真[J]. 山东大学学报(工学版), 2006, 36(1): 99 -102 .
[5] 来翔 . 用胞映射方法讨论一类MKdV方程[J]. 山东大学学报(工学版), 2006, 36(1): 87 -92 .
[6] 余嘉元1 , 田金亭1 , 朱强忠2 . 计算智能在心理学中的应用[J]. 山东大学学报(工学版), 2009, 39(1): 1 -5 .
[7] 李梁,罗奇鸣,陈恩红. 对象级搜索中基于图的对象排序模型(英文)[J]. 山东大学学报(工学版), 2009, 39(1): 15 -21 .
[8] 陈瑞,李红伟,田靖. 磁极数对径向磁轴承承载力的影响[J]. 山东大学学报(工学版), 2018, 48(2): 81 -85 .
[9] 王波,王宁生 . 机电装配体拆卸序列的自动生成及组合优化[J]. 山东大学学报(工学版), 2006, 36(2): 52 -57 .
[10] 李可,刘常春,李同磊 . 一种改进的最大互信息医学图像配准算法[J]. 山东大学学报(工学版), 2006, 36(2): 107 -110 .