铝质吹胀型平板回路热管及高温强冷空调

doi:10.6040/j.issn.1672-3961.0.2024.331

山东大学学报 (工学版) ›› 2026, Vol. 56 ›› Issue (2): 158-165.doi: 10.6040/j.issn.1672-3961.0.2024.331

• 能动工程——热管理专题 • 上一篇

铝质吹胀型平板回路热管及高温强冷空调

王定远^1,2,郭忠昌^1,2,李勇³,裴玉哲^1,2,赵鹏达^1,2,张传美^1,2,王伟锋^2,4,常利华^2,4,王飞^2,4,罗荣邦^2,4

1.青岛海尔智能技术研发有限公司, 山东青岛 266103;2.数字家庭网络国家工程研究中心, 山东青岛 266103;3.华南理工大学机械与汽车工程学院, 广东广州 510641;4.青岛海尔空调器有限总公司, 山东青岛 266101

发布日期:2026-04-13
作者简介:王定远(1980— ),男,河南漯河人,高级工程师,博士,主要研究方向为新型制冷制热技术. E-mail:wangdingyuan@haier.com
基金资助:
山东省重点研发计划资助项目(2022CXGC020203)

Roll bond aluminum flat loop heat pipe for high-temperature strong cooling air-conditioner

WANG Dingyuan^1,2, GUO Zhongchang^1,2, LI Yong³, PEI Yuzhe^1,2, ZHAO Pengda^1,2, ZHANG Chuanmei^1,2, WANG Weifeng^2,4, CHANG Lihua^2,4, WANG Fei^2,4, LUO Rongbang^2,4

WANG Dingyuan^{1, 2}, GUO Zhongchang^{1, 2}, LI Yong³, PEI Yuzhe^{1, 2}, ZHAO Pengda^{1, 2}, ZHANG Chuanmei^{1, 2}, WANG Weifeng^{2, 4}, CHANG Lihua^{2, 4}, WANG Fei^{2, 4}, LUO Rongbang^{2, 4}(1. Qingdao Haier Smart Technology R&
D Co., Ltd., Qingdao 266103, Shandong, China;
2. National Engineering Research Center of Digital Home Networking, Qingdao 266103, Shandong, China;
3. School of Mechanical and Automotive Engineering, South China University of Technology, Guangzhou 510641, Guangdong, China;
4. Qingdao Haier Air Conditioner Co., Ltd., Qingdao 266101, Shandong, China

Published:2026-04-13

摘要/Abstract

摘要： 为解决空调室外机变频功率器件的高温散热难题,提出并开发一种铝质吹胀型平板回路热管及散热器。基于一款额定制冷量7 600 W的柜机空调搭建仿真和试验平台。结果表明,采用该铝质吹胀型平板回路热管散热器可解决变频功率器件在强制风冷模式下的高温散热难题;空调室外机周边温度在53 ℃时,空调仍具备100%制冷能力;空调室外机周边温度高达62 ℃时,空调不停机。该研究保障了空调有效应对夏季极端高温天气。

关键词: 吹胀板, 回路热管, 电子散热, 变频空调, 高温制冷

Abstract: In order to solve the high-temperature heat dissipation problem of inverter power devices in air conditioner outdoor units, this paper proposed and developed a novel pump-free roll bond aluminum flat-plate loop heat pipe and radiator.Thermal simulation and experimental investigations were carried out on a cabinet air conditioner with rated cooling capacity of 7 600 W, thereby effectively resolving the high-temperature heat dissipation issue of inverter power devices under air-forced cooling conditions.The prototype air conditioner achieved 100% of its rated refrigerating capacity when the ambient temperature of the outdoor unit reached 53 ℃, and was capable of continuous operation even at an outdoor ambient temperature of 62 ℃. This performance enabled the air conditioner to adapt well to the extreme high-temperature weather in summer.

Key words: roll bond, loop heat pipe, heat dissipation, inverter air conditioner, high-temperature cooling

中图分类号:

TK124

王定远,郭忠昌,李勇,裴玉哲,赵鹏达,张传美,王伟锋,常利华,王飞,罗荣邦. 铝质吹胀型平板回路热管及高温强冷空调[J]. 山东大学学报 (工学版), 2026, 56(2): 158-165.

WANG Dingyuan, GUO Zhongchang, LI Yong, PEI Yuzhe, ZHAO Pengda, ZHANG Chuanmei, WANG Weifeng, CHANG Lihua, WANG Fei, LUO Rongbang. Roll bond aluminum flat loop heat pipe for high-temperature strong cooling air-conditioner[J]. Journal of Shandong University(Engineering Science), 2026, 56(2): 158-165.

参考文献

[1] 于永全, 贺素艳, 王军, 等. 高温制冷家用空调器性能研究[J]. 制冷, 2014, 33(4): 10-15. YU Yongquan, HE Suyan, WANG Jun, et al. Research on performance of high temperature refrigeration household air conditioner[J]. Refrigeration, 2014, 33(4): 10-15.
[2] 曲燕, 程林, 栾涛. 非规则截面散热板内嵌热管的传热能力分析[J]. 山东大学学报(工学版), 2008, 38(5): 42-45. QU Yan, CHENG Lin, LUAN Tao. Transport capacity analysis for special cross section heat pipes in radiators[J]. Journal of Shandong University(Engineering Science), 2008, 38(5): 42-45.
[3] CHEN Z S, LI Y, ZHOU W J, et al. Design, fabrication and thermal performance of a novel ultra-thin vapour chamber for cooling electronic devices[J]. Energy Conversion and Management, 2019, 187: 221-231.
[4] LI Y, ZHOU W J, LI Z X, et al. Experimental analysis of thin vapor chamber with composite wick structure under different cooling conditions[J]. Applied Thermal Engineering, 2019, 156: 471-484.
[5] ZHOU W J, CHEN Y T, LI Y, et al. Experimental study on improving the heat transfer performance of large-diameter thin flattened heat pipes[J]. Case Studies in Thermal Engineering, 2024, 61: 105159.
[6] ZHOU W J, LI Y, HUANG G W, et al. Thermal performance of a large-diameter thin flattened heat pipe with novel composite wick structure[J]. Case Studies in Thermal Engineering, 2024, 57: 104352.
[7] 陆万鹏, 史月涛, 孙奉仲. 分离式热管换热器与低压省煤器的性能分析[J]. 山东大学学报(工学版), 2012, 42(2): 102-107. LU Wanpeng, SHI Yuetao, SUN Fengzhong. Perfor-mance analyses of separated type heat pipe and low pressure economizer[J]. Journal of Shandong University(Engineering Science), 2012, 42(2): 102-107.
[8] ZHOU W J, LI Y, CHEN Z S, et al. Experimental study on the heat transfer performance of ultra-thin flattened heat pipe with hybrid spiral woven mesh wick structure[J]. Applied Thermal Engineering, 2020, 170: 115009.
[9] LI Y, ZHOU W J, LI Z X, et al. Experimental analysis of thin vapor chamber with composite wick structure under different cooling conditions[J]. Applied Thermal Engineering, 2019, 156: 471-484.
[10] 黄大革, 杨双根. 高热流密度电子设备散热技术[J]. 流体机械, 2006, 34(9): 71-74. HUANG Dage, YANG Shuanggen. Cooling technique for high flux electronic[J]. Fluid Machinery, 2006, 34(9): 71-74.
[11] 兰州石油机械研究所. 换热器[M]. 2版. 北京: 中国石化出版社, 2013: 1387-1437.
[12] 金利强, 朱建军, 王懿, 等. 重力热管两相传热特性影响参数的数值研究[J]. 风机技术, 2023(5): 63-68. JIN Liqiang, ZHU Jianjun, WANG Yi, et al. Numerical study on the influence parameters of two-phase heat transfer characteristics of gravity heat pipe[J]. Chinese Journal of Turbomachinery, 2023(5): 63-68.
[13] 方彬. 热管节能减排换热器设计与应用[M]. 北京: 化学工业出版社, 2013: 1-20.
[14] DENG L Q, LI Y, XIN Z F, et al. Thermal study of the natural air cooling using roll bond flat heat pipe as plate fin under multi-heat source condition[J]. International Journal of Thermal Sciences, 2023, 183: 107834.
[15] DENG L Q, LI Y, XU P K, et al. Fabrication and thermal performance of a novel roll-bond flat thermo-syphon[J]. Applied Thermal Engineering, 2020, 181: 115959.
[16] 李勇, 徐沛恳, 杨世凡, 等. 吹胀型铝质均热板的传热性能[J]. 华南理工大学学报(自然科学版), 2020, 48(2): 34-41. LI Yong, XU Peiken, YANG Shifan, et al. Thermal performance of roll bond aluminum vapor chamber[J].Journal of South China University of Technology(Natural Science Edition), 2020, 48(2): 34-41.
[17] 刘念, 唐永乐, 张学伟, 等. 倾角对平板型LHP运行性能的影响[J]. 节能, 2024, 43(4): 57-60. LIU Nian, TANG Yongle, ZHANG Xuewei, et al. Effect of inclination on the operating performance of flat plate LHP[J]. Energy Conservation, 2024, 43(4): 57-60.
[18] 浮恒. 面向服务器芯片散热的吹胀型分离式环路热管冷却系统研究[D]. 广州: 华南理工大学, 2023: 14-30. FU Heng. Research on the roll-bond separated-loop heat pipe cooling system for server chip heat dissipation[D]. Guangzhou:South China University of Technology, 2023: 14-30.
[19] 徐佳, 王定远, 白耀文, 等. 基于热虹吸平板热管的半导体制冷冰箱散热研究[J]. 家电科技, 2018(4): 82-85. XU Jia, WANG Dingyuan, BAI Yaowen, et al. Research on the heat rejection performance of one semiconductor refrigerator based on thermosyphon plate heat pipe[J]. Journal of Appliance Science & Technology, 2018(4): 82-85.
[20] 胡卓焕, 丁效誉, 许佳寅. 特斯拉阀通道结构毛细芯对环路热管启动性能的影响[J]. 化工进展, 2024(11): 6031-6038. HU Zhuohuan, DING Xiaoyu, XU Jiayin. Effect of Tesla-valve-structure wicks on the start-up performance of loop heat pipes[J]. Chemical Industry and Engineering Progress, 2024(11): 6031-6038.
[21] 柳洋, 朱波, 陈超伟, 等. 多热源冷却的新型环路热管设计及性能[J]. 山东大学学报(工学版), 2025, 55(6): 1-10. LIU Yang, ZHU Bo, CHEN Chaowei, et al. Design and performance of a novel loop heat pipe for multi-heat-sources cooling[J]. Journal of Shandong University(Engineering Science), 2025, 55(6): 1-10.

多维度评价

Viewed

Full text

Abstract

Cited

Shared

Discussed

铝质吹胀型平板回路热管及高温强冷空调

Roll bond aluminum flat loop heat pipe for high-temperature strong cooling air-conditioner

PDF (PC)

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 1

多维度评价

本文评价

推荐阅读 0