您的位置:山东大学 -> 科技期刊社 -> 《山东大学学报(工学版)》

山东大学学报(工学版) ›› 2010, Vol. 40 ›› Issue (6): 41-47.

• 控制科学与工程 • 上一篇    下一篇

概率空域拥挤管理模型与方法

田文,胡明华   

  1. 南京航空航天大学民航学院,  江苏 南京 210016
  • 收稿日期:2010-05-25 出版日期:2010-12-16 发布日期:2010-05-25
  • 作者简介:田文(1981-),女,山东青岛人,博士研究生,主要研究方向为空中交通管理系统资源优化配置.E-mail: tianwen0665@hotmail.com
  • 基金资助:

    国家高技术研究发展计划(863计划)资助项目(2006AA12A105)

Probabilistic airspace congestion management model and methodology

TIAN Wen, HU Ming-hua   

  1. College of Civil Aviation, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, China
  • Received:2010-05-25 Online:2010-12-16 Published:2010-05-25

摘要:

针对空域拥挤现象日益严重、管理策略与方法缺乏等问题,建立了空域拥挤预测模型和空域拥挤风险解决模型。采用预测模型预测未来可能产生拥挤的空域和时段,基于空域拥挤风险解决模型对具有高风险拥挤空域在预测时段内实施流量管理,在充分考虑延误成本、不同空域用户延误公平性及其对交通流影响程度等因素的情况下,有效降低拥挤风险。实际运行数据表明,所建立的空域拥挤预测模型和空域拥挤风险解决模型能有效地预测未来空域发生拥挤的时段,迅速找到适宜的拥挤解决策略,平衡运行风险控制与成本控制,为空中交通流量动态管理提供了新途径。

关键词: :空中交通, 空中交通流量管理, 风险预测, 空域拥挤管理

Abstract:

There are still no effective airspace congestion management strategies and methodologies to slove seriously increased airspace congestion. An airspace congestion prediction model and an airspace congestion resolution model were established. The airspace congestion prediction model was used to forecast the time intervals in which the congestion occurred, and the airspace congestion resolution model was used to control the air traffic flow in the airspace with high risk congestion during predicted time intervals. The airspace congestion risk was reduced, and also  some factors such as delay cost, delay equity of different airspace users and the influence to the air traffic flow were considered. Based on  real flight data,  simulation results showed that the two models could effectively predict the time of airspace congestion in the future, rapidly find out  suitable strategies, and balance performance risk control and cost control, which provided an innovative new way for dynamic air traffic flow management.

Key words: air traffic, air traffic flow management, risk prediction, airspace congestion management

No related articles found!
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
[1] 王素玉,艾兴,赵军,李作丽,刘增文 . 高速立铣3Cr2Mo模具钢切削力建模及预测[J]. 山东大学学报(工学版), 2006, 36(1): 1 -5 .
[2] 李 侃 . 嵌入式相贯线焊接控制系统开发与实现[J]. 山东大学学报(工学版), 2008, 38(4): 37 -41 .
[3] 孔祥臻,刘延俊,王勇,赵秀华 . 气动比例阀的死区补偿与仿真[J]. 山东大学学报(工学版), 2006, 36(1): 99 -102 .
[4] 陈瑞,李红伟,田靖. 磁极数对径向磁轴承承载力的影响[J]. 山东大学学报(工学版), 2018, 48(2): 81 -85 .
[5] 李可,刘常春,李同磊 . 一种改进的最大互信息医学图像配准算法[J]. 山东大学学报(工学版), 2006, 36(2): 107 -110 .
[6] 季涛,高旭,孙同景,薛永端,徐丙垠 . 铁路10 kV自闭/贯通线路故障行波特征分析[J]. 山东大学学报(工学版), 2006, 36(2): 111 -116 .
[7] 浦剑1 ,张军平1 ,黄华2 . 超分辨率算法研究综述[J]. 山东大学学报(工学版), 2009, 39(1): 27 -32 .
[8] 王丽君,黄奇成,王兆旭 . 敏感性问题中的均方误差与模型比较[J]. 山东大学学报(工学版), 2006, 36(6): 51 -56 .
[9] 孙殿柱,朱昌志,李延瑞 . 散乱点云边界特征快速提取算法[J]. 山东大学学报(工学版), 2009, 39(1): 84 -86 .
[10] 赵然杭,陈守煜 . 水资源数量与质量联合评价理论模型研究[J]. 山东大学学报(工学版), 2006, 36(3): 46 -50 .