您的位置:山东大学 -> 科技期刊社 -> 《山东大学学报(工学版)》

山东大学学报(工学版) ›› 2010, Vol. 40 ›› Issue (6): 36-40.

• 控制科学与工程 • 上一篇    下一篇

血液在体流动性无创测量方法及系统

孙欣,刘常春,赵玉娟,王新沛   

  1. 山东大学控制科学与工程学院, 山东 济南 250061
  • 收稿日期:2010-10-12 出版日期:2010-12-16 发布日期:2010-10-12
  • 作者简介:孙欣(1981-),男,山东淄博人,博士研究生,研究方向为心血管系统状态检测、心血管疾病早期检测技术. E-mail:bmesunxin@mail.sdu.edu.cn
  • 基金资助:

    国家高技术研究发展计划(863计划)资助项目(2006AA02Z4D9)

Non-invasive measurement of blood fluidity in vivo

SUN Xin, LIU Chang-chun, ZHAO Yu-juan, WANG Xin-pei   

  1. School of Control Science and Engineering, Shandong University, Jinan 250061, China
  • Received:2010-10-12 Online:2010-12-16 Published:2010-10-12

摘要:

血液流动性的降低是形成动脉粥样硬化进而导致心脑血管疾病的重要危险因素。血液流动性的定期跟踪检查对预防心脑血管疾病具有重要意义。建立了上肢血管系统的血液动力学模型,在分析血流阻断情况下动脉充盈压衰减过程的基础上,提出了血液在体流动性指数F,以表征人体的血液流动性,并阐述了其测量方法及测量系统。实验结果表明,本测量方法及测量系统具有很好的重复性、敏感性和特异性,对心血管疾病的早期预防具有较好的应用价值。

关键词: 血液流动性, 无创, 在体

Abstract:

Reduction of blood fluidity is an important risk factor for atherosclerosis and cardiovascular diseases. Frequent examination of blood fluidity has a great significance on prevention of cardiovascular diseases. A hemodynamic model of the vascular system of the upper limb was established. Based on the analysis of the decay of arterial static pressure, the blood fluidity index F was used to represent the blood fluidity in vivo. Using a function approximation method, the blood fluidity index F was calculated. Results of the experiment indicated that the method and the measurement system had  good reproducibility and  performed  well in terms of  sensitivity and  specificity.

Key words:  blood fluidity, noninvasive, in vivo

No related articles found!
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
[1] 李梁,罗奇鸣,陈恩红. 对象级搜索中基于图的对象排序模型(英文)[J]. 山东大学学报(工学版), 2009, 39(1): 15 -21 .
[2] 赵科军 王新军 刘洋 仇一泓. 基于结构化覆盖网的连续 top-k 联接查询算法[J]. 山东大学学报(工学版), 2009, 39(5): 32 -37 .
[3] 张承慧,宁勇,姬鹏 . 一种改进的FCM聚类算法及其在赤潮预测中的应用[J]. 山东大学学报(工学版), 2007, 37(6): 1 -4 .
[4] 姜国新 .

关于衍射原理应用的设计性实验

[J]. 山东大学学报(工学版), 2008, 38(1): 105 -108 .
[5] 徐奴文 唐春安 周济芳 唐烈先 梁正召. 锦屏二级水电站施工排水洞岩爆数值模拟[J]. 山东大学学报(工学版), 2009, 39(4): 134 -139 .
[6] 胡乃利,许延生 . 山东省水资源可持续能力评价[J]. 山东大学学报(工学版), 2007, 37(5): 95 -98 .
[7] 王建明 宫文军 高娜. 基于ALE法的磨料水射流加工数值模拟[J]. 山东大学学报(工学版), 2010, 40(1): 48 -52 .
[8] 赵志彦, 李波*. 基于成本分析方法的物流配送网络系统定位研究[J]. 山东大学学报(工学版), 2010, 40(2): 138 -142 .
[9] 姚占勇,李运恒,商庆森,李世华,张宏博 . 平原水网区等级公路若干问题的研究[J]. 山东大学学报(工学版), 2008, 38(1): 70 -73 .
[10] 侯晓林,吕 武,石 振,林福严 . 物理模型使能的机械产品设计知识[J]. 山东大学学报(工学版), 2007, 37(2): 25 -29 .