JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE) ›› 2016, Vol. 46 ›› Issue (5): 64-67.doi: 10.6040/j.issn.1672-3961.0.2015.407

Previous Articles     Next Articles

An IMC-PID robust control method for process of integrator plus time delay

HOU Mingdong1,2, WANG Yinsong1, TIAN Jie3   

  1. 1. School of Control and Computer Engineering, North China Electric Power University, Baoding 071003, Hebei, China;
    2. Department of Electrics and Automation, Shandong Labor Vocational and Technical College, Jinan 250100, Shandong, China;
    3. College of Information Technology, Shandong Women's University, Jinan 250100, Shandong, China
  • Received:2015-12-08 Online:2016-10-20 Published:2015-12-08

PDF (PC)

874

Abstract: For the integrated plus time delay in industrial system, a design and parameters tuning approach of internal model control PID(IMCPID)controller was proposed. The integrator in the model was replaced by a first-order lag, the steady-state performance of the system was improved, the time-delay term in the model was approached with the first-order Taylor expansion, and the design method of IMC-PID controller was founded. The analytical expression for robust tuning the adjustable parameter of the IMC-PID controller was derived based on the robustness index of the control system. The simulation results showed that the proposed method could provide a better dynamic performance and robustness against parameters perturbation, and the blindness of conventional method for controller parameter tuning was overcome.

Key words: dynamic response, internal model control-PID, integral process with time-delay, robustness, parameter tuning

CLC Number: 

  • TP273
[1] ALACNTARA S, ZHANG Weidong, PEDRET C, et al. IMC-like analytical H∞ design with S/SP mixed sensitivity consideration:utility in PIDtuning guidance[J].Journal of Process Control, 2011, 21(6):976-985.
[2] ZHAO Zhicheng, LIU Zhiyuan, ZHANG Jinggang. IMC-PID tuning method based on sensitivity specification for process with timedelay[J].Journal of Central South University of Technology, 2011, 18(4):1153-1160.
[3] YIN Chengqiang, HUI Hongzhong, YUE Jiguang, et al.Cascade control based on minimum sensitivity in outer loop for processes with time delay[J].Journal of Central South University, 2012, 19(9):2689-2696.
[4] 张井岗,马文廷,赵志诚.串级时滞过程的二自由度Smith预估控制[J].山东大学学报(工学版),2015,45(5):43-50. ZHANG Jinggang, MA Wenting, ZHAO Zhicheng. Two-degree-of-freedom Smith predictor control for cascade time delay process[J].Journal of Shandong University(Engineering Science), 2015, 45(5):43-50.
[5] LI Keyu. PID tuning for optimal closed-loop performance with specifiedgain and phase margins[J]. IEEE Trans on Control Systems Technology, 2013, 21(3):1024-1030.
[6] RAO A S, RAO V S R, CHIDAMBRAM M. Direct synthesis-based controller design for integrating processes with time delay[J]. Journal of the Franklin Institute, 2009, 346(1): 38-56.
[7] SHAMSUZZOHA M, LEE M. IMC-PID controller design for improved disturbance rejection of time-delayed process[J]. Ind Eng Chem Res, 2007, 46(7):2077-2091.
[8] CHEN Dan, SEBORG D E. PI/PID controller designbased on direct synthesis and disturbance rejection[J]. Ind Eng Chem Res, 2002, 41(19):4807-4822.
[9] AHMAD Ali,SOMANATH Majhi. PID controller tuning for integrating processes[J]. ISA Transactions, 2010, 49(1):70-78.
[10] 赵志诚,刘志远,张井岗.一种时滞过程内模PID控制器鲁棒整定方法[J].信息与控制,2010,39(5):526-530. ZHAO Zhicheng, LIU Zhiyuan, ZHANG Jinggang. A robust tuning method of internal model PID controller for process with time-delay[J].Information and Control, 2010, 39(5):526-530.
[11] WANG Yagang, SHAO Huihe. PID auto-tuner based on sensitivity specification[J]. Chemical Engineering Research and Design, 2000, 78(2):312-316.
[1] Chuncheng LIU,Qingxun TENG. Dynamic response parameters of wind turbine under thunderstorm downburst [J]. Journal of Shandong University(Engineering Science), 2023, 53(6): 108-121.
[2] Hengxu ZHANG,Zhimin GAO,Yongji CAO,Hao QIN,Dong YANG,Huan MA. Review and prospect of research on power system inertia with high penetration of renewable energy source [J]. Journal of Shandong University(Engineering Science), 2022, 52(5): 1-13.
[3] Hengxu ZHANG,Yongji CAO,Yi ZHANG,Changgang LI,Jiacheng RUAN,VLADIMIR Terzija. Review of frequency dynamic behavior evolution and analysis method requirements of power system [J]. Journal of Shandong University(Engineering Science), 2021, 51(5): 42-52.
[4] ZHAI Bin, ZHANG Sixiang, LIU Kaiming, TIAN Li, ZHANG Laiyi. Analysis on the dynamic response of multi-bundle transmission line subjected to ice-shedding [J]. Journal of Shandong University(Engineering Science), 2021, 51(4): 111-117.
[5] Yibin WANG,Tianli LI,Yusheng CHENG,Kun QIAN. Label distribution learning based on kernel extreme learning machine auto-encoder [J]. Journal of Shandong University(Engineering Science), 2020, 50(3): 58-65.
[6] ZHANG Jinggang, MA Wenting, ZHAO Zhicheng. Two-degree-of-freedom Smith predictor control for cascade time delay process [J]. Journal of Shandong University(Engineering Science), 2015, 45(5): 43-50.
[7] LIU Bo, WANG Youzhi*, AN Junjiang, WANG Yilin, YUAN Quan. The spatial model of vehicle-pavement coupling vibration and its dynamic responses analysis [J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2014, 44(3): 83-89.
[8] ZHAO Zhan-shan1,2, ZHANG Jing3, SUN Lian-kun, DING Gang1. Design of self-adaptive sliding mode controller with finite time convergence [J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2012, 42(4): 74-78.
[9] ZHOU Changhui1, HU Yongjian2, YU Shaopeng1. Design of a robust source scanner identification algorithm [J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2011, 41(2): 62-65.
[10] HUANG Bin. Discrete variable control systems based on a discrete reaching law [J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2011, 41(1): 45-48.
[11] ZHAO Yong-guo,JIA Lei,CAI Wen-jian . A PID tuning method for integrating processes [J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2008, 38(1): 48-51 .
[12] XIE Shu-ying,ZHANG Cheng-jin . An adaptive inverse control scheme of the limited system with input saturation [J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2006, 36(6): 62-66 .
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed   
[1] LI Kan . Empolder and implement of the embedded weld control system[J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2008, 38(4): 37 -41 .
[2] LAI Xiang . The global domain of attraction for a kind of MKdV equations[J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2006, 36(1): 87 -92 .
[3] YU Jia yuan1, TIAN Jin ting1, ZHU Qiang zhong2. Computational intelligence and its application in psychology[J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2009, 39(1): 1 -5 .
[4] LI Liang, LUO Qiming, CHEN Enhong. Graph-based ranking model for object-level search
[J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2009, 39(1): 15 -21 .
[5] CHEN Rui, LI Hongwei, TIAN Jing. The relationship between the number of magnetic poles and the bearing capacity of radial magnetic bearing[J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2018, 48(2): 81 -85 .
[6] WANG Bo,WANG Ning-sheng . Automatic generation and combinatory optimization of disassembly sequence for mechanical-electric assembly[J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2006, 36(2): 52 -57 .
[7] ZHANG Ying,LANG Yongmei,ZHAO Yuxiao,ZHANG Jianda,QIAO Peng,LI Shanping . Research on technique of aerobic granular sludge cultivationby seeding EGSB anaerobic granular sludge[J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2006, 36(4): 56 -59 .
[8] Yue Khing Toh1， XIAO Wendong2， XIE Lihua1. Wireless sensor network for distributed target tracking: practices via real test bed development[J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2009, 39(1): 50 -56 .
[9] SUN Weiwei， WANG Yuzhen. Finite gain stabilization of singlemachine infinite bus system subject to saturation[J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2009, 39(1): 69 -76 .
[10] SUN Yu-li,LI De-fa,ZUO Dun-wen,QI mei . [J]. JOURNAL OF SHANDONG UNIVERSITY (ENGINEERING SCIENCE), 2006, 36(6): 19 -23 .
Copyright 2018 © Editorial office of Journal of Shandong University (Engineering Science)
Supported by Beijing Magtech Co.Ltd